Export limit exceeded: 397871 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397871 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-27867 | 1 Teldat | 1 Regesta Smart Hd-plc - Tldph16d2 | 2026-09-25 | N/A |
| An attacker with access via network to the Regesta Smart HD-PLC of the provider Teldat (in this case, registration action is required) who has the vulnerable firmware version could inject a specific payload via the parameter "cmdcookie" withing the /upgrade/index.html resulting in to a Cross-Site Scripting (XSS). This issue affects Regesta Smart HD-PLC - TLDPH16D2: 11.02.06.00.02 | ||||
| CVE-2026-84281 | 2 Radykal, Wordpress | 2 Fancy Product Designer, Wordpress | 2026-09-25 | 7.2 High |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'productTitle' in '_fpd_data' Order Item Meta in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The fpd_save_order AJAX action is registered for unauthenticated users via wp_ajax_nopriv_fpd_save_order with no nonce or capability check, and the strip_tags() sanitization applied at save time is bypassed by submitting JSON unicode escape sequences (e.g. \u003c, \u003e), which json_decode() silently converts back to literal angle brackets when the order is rendered in the admin view. | ||||
| CVE-2026-98159 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying. | ||||
| CVE-2026-98158 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocated */ skb_trim(skb, 0); skb_reserve(skb, - skb_headroom(skb)); } ap->rpkt still points at that skb, so the next frame is reassembled into it with no headroom at all. A peer that sends a bad-FCS frame followed by one beginning ff 03 then leaves a single byte of headroom by the time the filter tag is pushed, which lands one byte below skb->head: skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000 data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL> kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x13e/0x230 Call Trace: skb_push+0xbd/0x100 ppp_receive_nonmp_frame+0x48a/0x1d10 ppp_input+0x4e9/0x2f80 ppp_async_process+0x2a/0xe0 tasklet_action_common+0x20f/0x8a0 handle_softirqs+0x18e/0x590 Kernel panic - not syncing: Fatal exception in interrupt Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb() gives the rest of the receive path. Besides the filter panic above, when CCP compression is enabled ppp_decompress_frame() hands skb->data - 2 to ->decompress()/->incomp(), which then reads out of bounds before skb->head for the same reason. Rather than restore the headroom, drop the errored frame - as ppp_synctty already does on its error path - and clear ap->rpkt so the next frame is reassembled into a fresh skb with proper headroom. This is simpler and fixes both the filter under-panic and the CCP out-of-bounds read. The original V1 of this patch made room in ppp_receive_nonmp_frame() with skb_cow_head(); Eric pointed out that fixing the root cause in the transport is the right approach. Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an interesting (remote) DoS: root configures PPP, the peer supplies two crashing frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a second, and returns cleanly with this applied. | ||||
| CVE-2026-98157 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-98155 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplicating the bounds checking code already present in decode_message(), use the function inside resp_worker(). | ||||
| CVE-2026-98154 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path. | ||||
| CVE-2026-98153 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix racy access to FDP placement id array nvme_query_fdp_info() is called per-path and therefore prone to races. It populates head->nr_plids/head->plids for fdp registration. But nothing protects that pair from concurrent access - two paths scanning the same namespace can race to populate it. Avoid the race by moving this initialization work to nvme_alloc_ns_head() which is called once per shared namespace. | ||||
| CVE-2026-98152 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources. | ||||
| CVE-2026-98151 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new offset is computed into dst_reg's var_off and 32/64-bit ranges. 2. Because pointer registers do not track 32-bit subregister bounds, __mark_reg32_unbounded() first sets r32 to the full range; r32 is re-derived from the offset at the end of the function by reg_bounds_sync(). 3. On the unprivileged path, sanitize_ptr_alu() is called and, via sanitize_speculative_path() -> push_stack(), snapshots the current register state and schedules the next instruction (insn 15) to be verified directly as a speculative path. 4. That snapshot is taken between step 2 and the final reg_bounds_sync(): at this point dst_reg's var_off still holds the (const) original offset while r32 has just been blanked to the full range, i.e. the two are out of sync. When the speculative path later verifies insn 15 (r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and trips the warning. var_off and the 32-bit range must always be consistent. There are two ways to keep the snapshot consistent: 1. sync var_off and r32 before the snapshot so they match, or 2. leave r32 at its original (already consistent) value and blank it only after the snapshot. The whole point of sanitize_ptr_alu() is to insert a harmless masking sequence that keeps the access in bounds under speculation, so the state it snapshots should faithfully represent that. Take approach 2: move __mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative snapshot keeps the pointer's original, consistent r32. The non-speculative path is unchanged: r32 is still blanked before the offset is applied and re-derived by reg_bounds_sync(). | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-98149 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore expected to use slot 1 and CPU3 slot 2. Instead, the current code uses slots 2 and 3 respectively, causing incorrect per-CPU values and an out-of-bounds read from the update buffer for CPU3. The corresponding lookup paths already use a dense offset while iterating over possible CPUs. Do the same for the array, hash, and cgroup storage update paths, advancing the source offset once for each possible CPU. BPF_F_ALL_CPUS continues to use the same value for every CPU. | ||||
| CVE-2026-98148 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit | ||||
| CVE-2026-98147 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure. | ||||
| CVE-2026-98146 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check. | ||||
| CVE-2026-98145 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | ||||
| CVE-2026-98144 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | ||||
| CVE-2026-98143 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | ||||
| CVE-2026-98142 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: <TASK> iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. | ||||