Export limit exceeded: 362040 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362040 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53134 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes. | ||||
| CVE-2026-53207 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock when racing with a concurrent unmap: thread#0 thread#1 -------- -------- madvise(folio, MADV_HWPOISON) -> poisons the folio successfully madvise(folio, MADV_HWPOISON) unmap(folio) try_memory_failure_hugetlb get_huge_page_for_hwpoison spin_lock_irq(&hugetlb_lock) <- held __get_huge_page_for_hwpoison hugetlb_update_hwpoison() -> MF_HUGETLB_FOLIO_PRE_POISONED goto out: folio_put() refcount: 1 -> 0 free_huge_folio() spin_lock_irqsave(&hugetlb_lock) -> AA DEADLOCK! The out: path in __get_huge_page_for_hwpoison() calls folio_put() to drop the GUP reference while the hugetlb_lock is still held by the hugetlb.c wrapper get_huge_page_for_hwpoison(). If concurrent unmap has released the page table mapping reference, folio_put() drops the folio refcount to zero, triggering free_huge_folio() which attempts to re-acquire the non-recursive hugetlb_lock. Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapper into get_huge_page_for_hwpoison(). Place spin_unlock_irq() before the folio_put() at the out: label so the folio is always released outside the lock. [akpm@linux-foundation.org: fix race, rename label per Miaohe] | ||||
| CVE-2026-53208 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR signaling packets up to the channel MTU and dispatches each command without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer within radio range can send a fixed-channel CID 0x0001 packet that is larger than MTUsig and contains many L2CAP_ECHO_REQ commands before pairing. In a real-radio stock-kernel run, one 681-byte signaling packet containing 168 zero-length ECHO_REQ commands made the target transmit 168 ECHO_RSP frames over about 220 ms. Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling packet containing packed ECHO_REQ commands. Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched. The Bluetooth Core spec wording for MTUExceeded says the reject identifier shall match the first request command in the packet, and that packets containing only responses shall be silently discarded. Linux intentionally deviates from that prescription: silently discarding desynchronizes the peer because the remote stack never learns its responses were dropped, and locating the first request command requires walking command headers past MTUsig, i.e. processing bytes from a packet we have already decided is too large to process. We therefore always emit one reject and use the identifier from the first command header, a single fixed-offset byte read. The unrestricted BR/EDR signaling parser and ECHO_REQ response path both trace to the initial git import; no later introducing commit is available for a Fixes tag. | ||||
| CVE-2026-53211 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register NFT_META_BRI_IIFHWADDR declares its destination register with len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and leaving the upper 2 bytes of the second register as uninitialised nft_do_chain() stack. A downstream load of that register span leaks those stale bytes to userspace. Zero the second register before the memcpy so the full declared span is written. | ||||
| CVE-2026-53150 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject zero-length property entries in validator tb_property_entry_valid() accepts entries with length == 0 for DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes validation but causes an underflow in the null-termination logic: property->value.text[property->length * 4 - 1] = '\0'; When property->length is 0 this writes to offset -1 relative to the allocation. Reject zero-length entries early in the validator since they have no valid representation in the XDomain property protocol. | ||||
| CVE-2026-53263 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. | ||||
| CVE-2026-6678 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A |
| Integer underflow in wc_PKCS7_DecryptOri when handling crafted Other Recipient Info, leading to incorrect length handling during decryption. | ||||
| CVE-2026-11800 | 1 Redhat | 7 Build Keycloak, Build Of Keycloak, Data Grid and 4 more | 2026-06-26 | 8.1 High |
| A flaw was found in Keycloak. This JWT algorithm confusion vulnerability in the JWT Authorization Grant flow allows an attacker with valid client credentials to bypass signature verification. By forging an assertion, the attacker can create unauthorized access tokens. This enables the attacker to impersonate any federated user linked to the affected Identity Provider, leading to unauthorized access and potential privilege escalation. | ||||
| CVE-2025-71338 | 1 Flowiseai | 1 Flowise | 2026-06-26 | 10 Critical |
| Flowise contains a path traversal vulnerability in the /api/v1/document-store/loader/process endpoint that allows unauthenticated attackers to write arbitrary files to the filesystem. Attackers can exploit unsanitized fileName parameters with ../ sequences to overwrite critical files like package.json and achieve remote code execution when the application restarts. | ||||
| CVE-2025-71334 | 1 Flowiseai | 1 Flowise | 2026-06-26 | 9.8 Critical |
| Flowise before 3.0.6 (affected versions 2.2.8 and earlier) contains an arbitrary file access vulnerability due to missing validation that the chatflowId and chatId parameters are UUIDs or numbers in file handling operations. By supplying a path-traversal value (e.g., '../../../../../tmp') as the chatflow id, an unauthenticated attacker can use the /api/v1/chatflows endpoint (via addBase64FilesToStorage) to write arbitrary files, and the /api/v1/get-upload-file and /api/v1/openai-assistants-file/download endpoints (via streamStorageFile) to read arbitrary files. Arbitrary file write may lead to remote code execution. | ||||
| CVE-2026-7532 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A |
| iPAddress name constraints bypass when WOLFSSL_IP_ALT_NAME is not defined. IP address name constraints are not enforced in that configuration, allowing a certificate to bypass an issuing CA's IP address constraints. | ||||
| CVE-2026-11998 | 1 Google | 1 Angularjs | 2026-06-26 | 7.6 High |
| A flaw in AngularJS' Strict Contextual Escaping (SCE) logic allows bypassing certain SCE policies for resource URLs and can lead to arbitrary JavaScript execution within the context of the victim's browser session. SCE's purpose is to ensure that only trusted or safe values are used in certain security-sensitive contexts, such as resource URLs, including URLs that define executable JavaScript scripts, '<iframe>' documents, route templates, etc. A flaw in the logic that tries to match entire URLs against regular expression matchers can result in partial matches for certain types of regular expressions, effectively bypassing the policies and allowing the use of unsafe values as resource URLs. This issue affects AngularJS versions greater than or equal to 1.2.0-rc.3. Note: The AngularJS project was already End-of-Life when this CVE was published and will not receive any updates to address this issue. For more information see the End-of-Life announcement https://docs.angularjs.org/misc/version-support-status . | ||||
| CVE-2026-9716 | 1 Schneider-electric | 1 Powerlogic P7 | 2026-06-26 | N/A |
| CWE-476 NULL Pointer Dereference vulnerability exists that could cause a denial-of-service condition, rendering the device’s HMI and configuration functionality unavailable when malformed requests are received over exposed network interfaces. | ||||
| CVE-2026-9718 | 1 Schneider-electric | 1 Powerlogic P7 | 2026-06-26 | N/A |
| CWE-617 Reachable Assertion vulnerability exists that could allow an authenticated attacker to trigger a denial-of-service condition, impacting system availability when a specially crafted request is sent to a vulnerable network-exposed service. | ||||
| CVE-2026-9086 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-26 | 7.3 High |
| A flaw was found in Keycloak. A remote attacker with administrative privileges, specifically those with `manage-client` permission or access to client registration endpoints, could bypass client Uniform Resource Identifier (URI) validation. This is achieved by registering a malicious client with a specially crafted redirect URI using a case-insensitive `javascript:` or `data:` scheme. This Cross-Site Scripting (XSS) vulnerability allows for arbitrary code execution in the Keycloak origin when a victim clicks the crafted link, such as in the logout flow or the Admin Console. | ||||
| CVE-2026-52703 | 2 Ninjateam, Wordpress | 2 Fastdup, Wordpress | 2026-06-26 | 9.6 Critical |
| Unauthenticated Path Traversal in FastDup <= 2.7.2 versions. | ||||
| CVE-2026-9099 | 1 Redhat | 1 Build Keycloak | 2026-06-26 | 7.7 High |
| A flaw was found in Keycloak. A missing authorization check in the GroupResource.addChild() endpoint within the Admin REST API allows an authenticated user with limited administrative privileges to reparent any existing group. When Fine-Grained Admin Permissions v2 (FGAPv2) is enabled, an attacker with management rights over a single low-privilege group can reparent a highly privileged group (such as one possessing the realm-admin role) under their managed group. Because group permissions follow a hierarchical structure, this action unauthorizedly grants the attacker management and password-reset capabilities over the members of the targeted privileged group. An attacker can exploit this to reset an administrator's password, compromise the account, and achieve a full realm takeover, leading to a complete compromise of confidentiality, integrity, and availability. | ||||
| CVE-2026-9799 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-26 | 4.6 Medium |
| A flaw was found in org.keycloak.authorization. An authenticated user with a granted User-Managed Access (UMA) permission ticket for one resource can exploit this by using a specific permission request prefix to bypass per-resource access control. This allows the user to gain unauthorized access to all resources of that type within the same resource server, even if they do not have a ticket for those specific resources. This vulnerability requires the resource server to be configured in PERMISSIVE policy enforcement mode and affects typed resources with ownerManagedAccess enabled, where no explicit policy protects the resource type. The primary consequence is unauthorized information disclosure or modification of resources. | ||||
| CVE-2026-9083 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-26 | 4.9 Medium |
| A flaw was found in Keycloak. A realm administrator with the "manage-realm" role can exploit this vulnerability by submitting an arbitrary filesystem path as a keystore parameter when creating a key provider component. This allows the administrator to probe arbitrary filesystem paths, determining which files exist and are readable by the Keycloak process. This information disclosure could be used to identify high-value targets for follow-on attacks. | ||||
| CVE-2026-53034 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated--- | ||||