Export limit exceeded: 360033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-25600 | 1 Bricksbuilder | 1 Bricks | 2026-04-15 | 10 Critical |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Codeer Limited Bricks Builder allows Code Injection.This issue affects Bricks Builder: from n/a through 1.9.6. | ||||
| CVE-2022-50927 | 1 Vertiv | 1 Cyclades Serial Console Server | 2026-04-15 | 6.2 Medium |
| Cyclades Serial Console Server 3.3.0 contains a local privilege escalation vulnerability due to overly permissive sudo privileges for the admin user and admin group. Attackers can exploit the default user configuration to gain root access by manipulating system binaries and leveraging unrestricted sudo permissions. | ||||
| CVE-2023-53862 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix missing hfs_bnode_get() in __hfs_bnode_create Syzbot found a kernel BUG in hfs_bnode_put(): kernel BUG at fs/hfs/bnode.c:466! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466 Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56 RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293 RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1 R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80 R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hfs_write_inode+0x1bc/0xb40 write_inode fs/fs-writeback.c:1440 [inline] __writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878 __writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949 wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054 wb_check_start_all fs/fs-writeback.c:2176 [inline] wb_do_writeback fs/fs-writeback.c:2202 [inline] wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> The BUG_ON() is triggered at here: /* Dispose of resources used by a node */ void hfs_bnode_put(struct hfs_bnode *node) { if (node) { <skipped> BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!! <skipped> } } By tracing the refcnt, I found the node is created by hfs_bmap_alloc() with refcnt 1. Then the node is used by hfs_btree_write(). There is a missing of hfs_bnode_get() after find the node. The issue happened in following path: <alloc> hfs_bmap_alloc hfs_bnode_find __hfs_bnode_create <- allocate a new node with refcnt 1. hfs_bnode_put <- decrease the refcnt <write> hfs_btree_write hfs_bnode_find __hfs_bnode_create hfs_bnode_findhash <- find the node without refcnt increased. hfs_bnode_put <- trigger the BUG_ON() since refcnt is 0. | ||||
| CVE-2025-61224 | 1 Dokuwiki | 1 Dokuwiki | 2026-04-15 | 6.5 Medium |
| Cross Site Scripting vulnerability in DokuWiki 2025-05-14a 'Librarian'[56.1] allows a remote attacker to execute arbitrary code via the q parameter | ||||
| CVE-2024-3065 | 2 Mohsinrasool, Wordpress | 2 Paypal Pay Now, Buy Now, Donation And Cart Buttons Shortcode, Wordpress | 2026-04-15 | 4.4 Medium |
| The PayPal Pay Now, Buy Now, Donation and Cart Buttons Shortcode plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. CVE-2024-5447 may be a duplicate of this issue. | ||||
| CVE-2024-2193 | 2 Amd, Xen | 2 Cpu, Xen | 2026-04-15 | 5.7 Medium |
| A Speculative Race Condition (SRC) vulnerability that impacts modern CPU architectures supporting speculative execution (related to Spectre V1) has been disclosed. An unauthenticated attacker can exploit this vulnerability to disclose arbitrary data from the CPU using race conditions to access the speculative executable code paths. | ||||
| CVE-2025-8058 | 1 Gnu | 1 Glibc | 2026-04-15 | 4.2 Medium |
| The regcomp function in the GNU C library version from 2.4 to 2.41 is subject to a double free if some previous allocation fails. It can be accomplished either by a malloc failure or by using an interposed malloc that injects random malloc failures. The double free can allow buffer manipulation depending of how the regex is constructed. This issue affects all architectures and ABIs supported by the GNU C library. | ||||
| CVE-2022-50926 | 1 Wago | 2 750-8212, Pfc200 | 2026-04-15 | 9.8 Critical |
| WAGO 750-8212 PFC200 G2 2ETH RS firmware contains a privilege escalation vulnerability that allows attackers to manipulate user session cookies. Attackers can modify the cookie's 'name' and 'roles' parameters to elevate from ordinary user to administrative privileges without authentication. | ||||
| CVE-2025-68198 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crash: fix crashkernel resource shrink When crashkernel is configured with a high reservation, shrinking its value below the low crashkernel reservation causes two issues: 1. Invalid crashkernel resource objects 2. Kernel crash if crashkernel shrinking is done twice For example, with crashkernel=200M,high, the kernel reserves 200MB of high memory and some default low memory (say 256MB). The reservation appears as: cat /proc/iomem | grep -i crash af000000-beffffff : Crash kernel 433000000-43f7fffff : Crash kernel If crashkernel is then shrunk to 50MB (echo 52428800 > /sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved: af000000-beffffff : Crash kernel Instead, it should show 50MB: af000000-b21fffff : Crash kernel Further shrinking crashkernel to 40MB causes a kernel crash with the following trace (x86): BUG: kernel NULL pointer dereference, address: 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI <snip...> Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? __release_resource+0xd/0xb0 release_resource+0x26/0x40 __crash_shrink_memory+0xe5/0x110 crash_shrink_memory+0x12a/0x190 kexec_crash_size_store+0x41/0x80 kernfs_fop_write_iter+0x141/0x1f0 vfs_write+0x294/0x460 ksys_write+0x6d/0xf0 <snip...> This happens because __crash_shrink_memory()/kernel/crash_core.c incorrectly updates the crashk_res resource object even when crashk_low_res should be updated. Fix this by ensuring the correct crashkernel resource object is updated when shrinking crashkernel memory. | ||||
| CVE-2025-40317 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regmap: slimbus: fix bus_context pointer in regmap init calls Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap. That commit breaks audio playback, for instance, on sdm845 Thundercomm Dragonboard 845c board: Unable to handle kernel paging request at virtual address ffff8000847cbad4 ... CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT Hardware name: Thundercomm Dragonboard 845c (DT) ... Call trace: slim_xfer_msg+0x24/0x1ac [slimbus] (P) slim_read+0x48/0x74 [slimbus] regmap_slimbus_read+0x18/0x24 [regmap_slimbus] _regmap_raw_read+0xe8/0x174 _regmap_bus_read+0x44/0x80 _regmap_read+0x60/0xd8 _regmap_update_bits+0xf4/0x140 _regmap_select_page+0xa8/0x124 _regmap_raw_write_impl+0x3b8/0x65c _regmap_bus_raw_write+0x60/0x80 _regmap_write+0x58/0xc0 regmap_write+0x4c/0x80 wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x] snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core] __soc_pcm_hw_params+0x22c/0x634 [snd_soc_core] dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core] dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core] snd_pcm_hw_params+0x124/0x464 [snd_pcm] snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm] snd_pcm_ioctl+0x34/0x4c [snd_pcm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xf0 el0t_64_sync+0x198/0x19c The __devm_regmap_init_slimbus() started to be used instead of __regmap_init_slimbus() after the commit mentioned above and turns out the incorrect bus_context pointer (3rd argument) was used in __devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or the first user of devm_regmap_init_slimbus() but we should fix it till the point where __devm_regmap_init_slimbus() was introduced therefore two "Fixes" tags. While at this, also correct the same argument in __regmap_init_slimbus(). | ||||
| CVE-2025-40303 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: ensure no dirty metadata is written back for an fs with errors [BUG] During development of a minor feature (make sure all btrfs_bio::end_io() is called in task context), I noticed a crash in generic/388, where metadata writes triggered new works after btrfs_stop_all_workers(). It turns out that it can even happen without any code modification, just using RAID5 for metadata and the same workload from generic/388 is going to trigger the use-after-free. [CAUSE] If btrfs hits an error, the fs is marked as error, no new transaction is allowed thus metadata is in a frozen state. But there are some metadata modifications before that error, and they are still in the btree inode page cache. Since there will be no real transaction commit, all those dirty folios are just kept as is in the page cache, and they can not be invalidated by invalidate_inode_pages2() call inside close_ctree(), because they are dirty. And finally after btrfs_stop_all_workers(), we call iput() on btree inode, which triggers writeback of those dirty metadata. And if the fs is using RAID56 metadata, this will trigger RMW and queue new works into rmw_workers, which is already stopped, causing warning from queue_work() and use-after-free. [FIX] Add a special handling for write_one_eb(), that if the fs is already in an error state, immediately mark the bbio as failure, instead of really submitting them. Then during close_ctree(), iput() will just discard all those dirty tree blocks without really writing them back, thus no more new jobs for already stopped-and-freed workqueues. The extra discard in write_one_eb() also acts as an extra safenet. E.g. the transaction abort is triggered by some extent/free space tree corruptions, and since extent/free space tree is already corrupted some tree blocks may be allocated where they shouldn't be (overwriting existing tree blocks). In that case writing them back will further corrupting the fs. | ||||
| CVE-2025-40223 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: Fix use-after-free in hdm_disconnect hdm_disconnect() calls most_deregister_interface(), which eventually unregisters the MOST interface device with device_unregister(iface->dev). If that drops the last reference, the device core may call release_mdev() immediately while hdm_disconnect() is still executing. The old code also freed several mdev-owned allocations in hdm_disconnect() and then performed additional put_device() calls. Depending on refcount order, this could lead to use-after-free or double-free when release_mdev() ran (or when unregister paths also performed puts). Fix by moving the frees of mdev-owned allocations into release_mdev(), so they happen exactly once when the device is truly released, and by dropping the extra put_device() calls in hdm_disconnect() that are redundant after device_unregister() and most_deregister_interface(). This addresses the KASAN slab-use-after-free reported by syzbot in hdm_disconnect(). See report and stack traces in the bug link below. | ||||
| CVE-2025-40166 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Check GuC running state before deregistering exec queue In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. (cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) | ||||
| CVE-2025-40155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: debugfs: Fix legacy mode page table dump logic In legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTR maybe uninitialized or zero in that case and may cause oops like: Oops: general protection fault, probably for non-canonical address 0xf00087d3f000f000: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 RIP: 0010:pgtable_walk_level+0x98/0x150 RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206 RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000 RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000 R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98 FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <TASK> pgtable_walk_level+0x88/0x150 domain_translation_struct_show.isra.0+0x2d9/0x300 dev_domain_translation_struct_show+0x20/0x40 seq_read_iter+0x12d/0x490 ... Avoid walking the page table if TT is not 00b or 01b. | ||||
| CVE-2025-40107 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks. | ||||
| CVE-2025-36729 | 1 Racom | 1 M!dge | 2026-04-15 | 7.2 High |
| A non-primary administrator user with admin rights to the web interface but without shell access permissions can display configuration of the device including the master admin password. This vulnerability also allows the user to give themselves shell access with the root gid. | ||||
| CVE-2025-3621 | 2026-04-15 | 9.6 Critical | ||
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems. * vulnerabilities: * Improper Neutralization of Special Elements used in a Command ('Command Injection') * Use of Hard-coded Credentials * Improper Authentication * Binding to an Unrestricted IP Address The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. | ||||
| CVE-2024-13502 | 2026-04-15 | N/A | ||
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Newtec/iDirect NTC2218, NTC2250, NTC2299 on Linux, PowerPC, ARM allows Local Code Inclusion.This issue affects NTC2218, NTC2250, NTC2299: from 1.0.1.1 through 2.2.6.19. The `commit_multicast` page used to configure multicasts in the modem's web administration interface uses improperly parses incoming data from the request before passing it to an `eval` statement in a bash script. This allows attackers to inject arbitrary shell commands. | ||||
| CVE-2024-13386 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.4 Medium |
| The quote-posttype-plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Author field in all versions up to, and including, 1.2.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2025-34352 | 2 Jumpcloud, Microsoft | 2 Remote Assist, Windows | 2026-04-15 | N/A |
| JumpCloud Remote Assist for Windows versions prior to 0.317.0 include an uninstaller that is invoked by the JumpCloud Windows Agent as NT AUTHORITY\SYSTEM during agent uninstall or update operations. The Remote Assist uninstaller performs privileged create, write, execute, and delete actions on predictable files inside a user-writable %TEMP% subdirectory without validating that the directory is trusted or resetting its ACLs when it already exists. A local, low-privileged attacker can pre-create the directory with weak permissions and leverage mount-point or symbolic-link redirection to (a) coerce arbitrary file writes to protected locations, leading to denial of service (e.g., by overwriting sensitive system files), or (b) win a race to redirect DeleteFileW() to attacker-chosen targets, enabling arbitrary file or folder deletion and local privilege escalation to SYSTEM. This issue is fixed in JumpCloud Remote Assist 0.317.0 and affects Windows systems where Remote Assist is installed and managed through the Agent lifecycle. | ||||