Export limit exceeded: 395334 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395334 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93601 | 2026-09-18 | 2.2 Low | ||
| rustls-webpki (the Rust webpki fork used by rustls) versions >= 0.101.0 and prior to 0.103.12 and 0.104.0-alpha.6 incorrectly accepted permitted-subtree DNS name constraints for certificates asserting a wildcard name. For example, a name constraint of accept.example.com was treated as satisfied by a certificate for *.example.com, which could feasibly assert reject.example.com — a name outside the permitted subtree. Because name constraints are restrictions applied to otherwise properly issued certificates, the issue is only reachable after signature verification succeeds and requires a misissued wildcard certificate to exploit. | ||||
| CVE-2026-93592 | 1 Vllm | 1 Vllm | 2026-09-18 | 7.5 High |
| vLLM versions before 0.28.0 fail to validate the lower bound of token IDs in the /v1/embeddings and /pooling endpoints, allowing unauthenticated attackers to crash the engine by submitting negative token IDs. A single request with a negative token ID triggers a CUDA device-side assertion that poisons the GPU context, causing all subsequent requests to fail until the process restarts. | ||||
| CVE-2026-93587 | 1 Imagemagick | 1 Imagemagick | 2026-09-18 | 3.3 Low |
| ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a policy bypass in the PCD (and, per the upstream advisory, CUBE and HALD) coder: when a specific command line option is supplied, the decoder does not check a configured resource limit, which can result in extra memory allocation. A local user able to pass command line options to ImageMagick can therefore exceed the intended memory policy limit, causing a limited availability impact. The issue is fixed in 7.1.2-31 and 6.9.13-56. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-90387 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to dma_free_from_pool(), which will fail to recognize the chunk Pass the virtual address returned by the allocation path into swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This keeps the pool free path using the same virtual address as the allocator. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90372 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss If a peer's VHT/HE MCS map has no supported spatial stream (all fields 0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255), which was then written into the firmware sta_rec_bf beamforming fields. Clamp the result to 0. | ||||
| CVE-2026-90343 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: stop PMSR before P2P and NAN teardown PMSR request teardown must abort active measurements while the wireless_dev is still present in the driver. cfg80211_leave_locked() and cfg80211_stop_pd() already do this before invoking the driver's stop callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not. Those helpers are also called directly by nl80211, rfkill shutdown, and wireless_dev unregister paths. If one of these paths stops a P2P device or NAN interface with a pending request, it removes the mac80211 subinterface from the driver first. Subsequent request cleanup cannot reach the lower driver's abort callback, but cfg80211 frees the request regardless. Driver state can then retain a stale request and use it when it later reports a result. Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN interface. This keeps lower-driver request state and cfg80211 request ownership in sync for all of the helpers' callers. | ||||
| CVE-2026-90332 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush cached MSI write before unmapping the iATU The MSI-X path already flushes any posted MSI-X write before tearing down its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry") to make sure the write reaches the Root Complex before the outbound window that translates it disappears. The MSI path has the same problem but no equivalent flush. When the Endpoint driver caches an MSI target address and later observes that the Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing iATU entry and reprograms it for the new address. Between the last MSI writel() and the unmap there may still be a posted write sitting in the fabric, and unmapping the iATU entry can drop or misroute that write. Fix this by reading back from the mapped MSI window before the unmap. The readback drains any posted MSI writes through the same iATU entry that mapped them, which is the same logic the MSI-X path uses. [mani: commit log] | ||||
| CVE-2026-90329 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: synchronize input before cleaning up a failed probe hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks. For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock. Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report callback already in progress. | ||||
| CVE-2026-90324 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages(). | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90317 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This preserves valid pointers in non-sleepable programs and inside an explicit RCU read-side section. | ||||
| CVE-2026-90316 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table. | ||||
| CVE-2026-90308 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users. | ||||
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90286 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to execute the next submission while the ME is still in the previous submission. After a VM flush, emit PFP_SYNC_ME on compute queues as well. | ||||
| CVE-2026-90268 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create() failure must unregister disk_dev and let scsi_disk_release() free sdkp. Going through out_free_index kfree()s an already registered device and leaks the sysfs entry. | ||||