Export limit exceeded: 349292 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349292 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43459 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses). | ||||
| CVE-2026-43464 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-43465 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-43262 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742. | ||||
| CVE-2026-43261 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Add support for TSV110 Spectre-BHB mitigation The TSV110 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of TSV110 to the list for software mitigation. | ||||
| CVE-2026-43265 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block() Ignore -EBUSY when checking nested events after exiting a blocking state while L2 is active, as exiting to userspace will generate a spurious userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's demise. Continuing with the wakeup isn't perfect either, as *something* has gone sideways if a vCPU is awakened in L2 with an injected event (or worse, a nested run pending), but continuing on gives the VM a decent chance of surviving without any major side effects. As explained in the Fixes commits, it _should_ be impossible for a vCPU to be put into a blocking state with an already-injected event (exception, IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected events, and thus put the vCPU into what should be an impossible state. Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be violating x86 architecture, e.g. by WARNing if KVM attempts to inject an exception or interrupt while the vCPU isn't running. | ||||
| CVE-2026-43264 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup. | ||||
| CVE-2026-43260 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context. | ||||
| CVE-2026-43367 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix a few more NULL pointer dereference in device cleanup I found a few more paths that cleanup fails due to a NULL version pointer on unsupported hardware. Add NULL checks as applicable. (cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) | ||||
| CVE-2026-43460 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix double-free in remove() callback The driver uses devm_spi_register_controller() for registration, which automatically unregisters the controller via devm cleanup when the device is removed. The manual call to spi_unregister_controller() in the remove() callback can lead to a double-free. And to make sure controller is unregistered before DMA buffer is unmapped, switch to use spi_register_controller() in probe(). | ||||
| CVE-2026-43462 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function. | ||||
| CVE-2026-43466 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2026-44400 | 2026-05-08 | 8.1 High | ||
| MailEnable Enterprise Premium 10.55 and earlier contains an improper authorization vulnerability in the WebAdmin mobile portal that allows attackers to bypass authentication checks by reusing AuthenticationToken cookies generated for low-privileged users. Attackers can obtain a token from the WebMail login endpoint using the PersistentLogin parameter and replay it against the WebAdmin portal to perform highly privileged administrative actions. | ||||
| CVE-2026-7989 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-08 | 4.2 Medium |
| Insufficient data validation in DataTransfer in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-6659 | 2026-05-08 | 7.5 High | ||
| Crypt::PasswdMD5 versions through 1.42 for Perl generates insecure random values for salts. The built-in rand function is predictable, and unsuitable for cryptography. | ||||
| CVE-2024-53326 | 2026-05-08 | 7.3 High | ||
| LINQPad before 5.52.01 Pro edition is vulnerable to Unsafe Deserialization in LINQPad.AutoRefManager::PopulateFromCache(), leading to code execution. | ||||
| CVE-2026-8090 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-08 | 7.3 High |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. | ||||
| CVE-2026-42501 | 2026-05-08 | 7.5 High | ||
| A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated. | ||||
| CVE-2022-23961 | 2026-05-08 | 6.1 Medium | ||
| In Thruk Monitoring through 2.46.3, the login field of the login form is vulnerable to reflected XSS. This vulnerability can be exploited by unauthenticated remote attackers to target users of the monitoring interface. | ||||
| CVE-2022-26522 | 2026-05-08 | 7.8 High | ||
| The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xc4a3. | ||||