| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, internal/wasm/imagefetcher.go follows tenant-controlled EnvoyExtensionPolicy spec.wasm[].code.image.url values to Docker or OCI Wasm layers, and extractWasmPluginBinary uses the untrusted tar-header h.Size value to allocate memory before validating the entry name or declared size. A small PAX or GNU tar header can therefore claim a multi-terabyte entry even though the surrounding LimitReader restricts only the bytes read from the stream, and no registry allowlist prevents a permitted tenant from selecting an attacker-controlled registry that the controller can reach. The allocation is attempted for every tar entry and can cause an unrecoverable Go runtime out-of-memory failure; because the custom resource persists, reconciliation repeatedly crash-loops the shared controller and causes a single-request, non-volumetric, cluster-wide control-plane denial of service. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, HTTPServer.ServeHTTP in internal/wasm/httpserver.go reads the plain mappingPath2Cache map without synchronization while HTTPServer.Get writes the same map during EnvoyExtensionPolicy translation. An attacker with pod-network access to unauthenticated port 18002 and tenant permission to churn policies with distinct Wasm URLs can flood GET requests until a per-request reader overlaps a writer. Go's concurrent map read and write detection invokes runtime.throw, which the net/http connection recovery cannot catch, terminating the controller process and causing a timing-dependent, cross-tenant control-plane denial of service until Kubernetes restarts the pod. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, to_absolute_normalized_path in internal/gatewayapi/luavalidator/security.lua does not collapse redundant separators before is_critical_path evaluates Lua submitted through EnvoyExtensionPolicy during default Strict validation. Linux resolves a double-slash absolute path as the corresponding single-slash path, but the validator does not match the redundant-separator form, allowing submitted Lua to read arbitrary files from the gateway controller pod. Exposed files can include Kubernetes service-account tokens, TLS certificates, and process environment data, and the disclosed credentials can provide access to sensitive Kubernetes API Server or Gateway xDS server information. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, an HTTPRoute can use an extension-managed custom backendRef to reference a backend resource in another namespace without a matching Gateway API ReferenceGrant in the target namespace. The custom-backend branch in internal/gatewayapi/route.go omits validateBackendNamespace, allowing the route-owning namespace to bind to and use the resource without the backend namespace owner's consent and violating the Gateway API cross-namespace authorization model. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, translateSecurityPolicyForRoute in internal/gatewayapi/securitypolicy.go dereferences a nil authorization value when a namespace-scoped tenant creates a SecurityPolicy targeting a TCPRoute and omits spec.authorization. The persistent object triggers the panic on every reconcile; recovery in message/watchutil.go keeps the process alive but unwinds the runner/runner.go handle callback, stalling controller-wide xDS and infrastructure intermediate-representation publishing until an administrator deletes the object. The data plane continues to serve the last known good configuration while publication is stalled. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, getFileFromGZ in internal/wasm/httpfetcher.go calls io.ReadAll on a gzip.Reader without limiting decompressed output when a tenant-controlled EnvoyExtensionPolicy.spec.wasm[].code.http.url points to a reachable compressed Wasm payload. The 256 MiB compressed-input cap does not constrain the expanded size, no operator Wasm URL allowlist exists, and the optional sha256 check occurs only after decompression, so a comparatively small gzip stream can force a multi-gigabyte allocation in the shared controller. The resulting out-of-memory termination restarts the controller, re-reconciles the persistent custom resource, and can create a persistent cross-tenant control-plane outage. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, the xDS gRPC server in GatewayNamespaceMode, configured through provider.kubernetes.deploy.type=GatewayNamespace, installs a JWT StreamInterceptor but no UnaryInterceptor, leaving every unary Fetch RPC unauthenticated. The streaming interceptor also authenticates only discoveryv3.DeltaDiscoveryRequest messages; a discoveryv3.DiscoveryRequest used by the State-of-the-World protocol fails the type assertion and returns success without JWT validation. Any pod that can reach port 18000 can use the unauthenticated unary or State-of-the-World paths to retrieve TLS private keys through StreamSecrets, all xDS resources through StreamAggregatedResources, backend endpoints through StreamClusters or StreamEndpoints, and routing configuration through StreamRoutes or StreamListeners. This issue is fixed in versions 1.7.4 and 1.8.1. |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, the HTTP OAuth2 filter (envoy.filters.http.oauth2) can leave an in-flight async token exchange attached to a downstream stream that has already been torn down. A late AsyncClient completion can still invoke OAuth2Filter methods that use StreamDecoderFilterCallbacks after that object’s lifetime has ended, causing undefined behavior, worker crashes (availability loss), and use-after-free / invalid-vptr failures under AddressSanitizer. This is a memory-safety / lifetime issue in the data plane, not a trivial config bug. Remote code execution is not claimed here; the primary demonstrated impact is DoS via crash and UB; any further impact would be deployment- and allocator-dependent. This vulnerability is fixed in 1.37.5 and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, the OAuth2 HTTP filter's encrypt()/decrypt() functions use AES-256-CBC without an authentication tag (no HMAC, no AEAD). The /callback endpoint returns HTTP 302 on successful decryption and HTTP 401 on padding failure, creating a padding oracle. An attacker who obtains the encrypted CodeVerifier cookie can recover the plaintext PKCE code_verifier in ~6,200 requests (~100 seconds), then exchange it with a stolen authorization code to obtain the victim's access token. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, Envoy can translate a downstream HTTP/3 request that is complete at the transport layer (HEADERS with FIN / headers-only close) but still carries a nonzero Content-Length into a complete upstream HTTP/1 request with unresolved body debt. In an HTTP/1 upstream deployment where the origin replies before reading the declared body and keeps the connection reusable, the beginning of the next Envoy-generated upstream request can be consumed as the first request's body. The remaining bytes are then parsed by the origin as a new HTTP/1 request. This was reproduced as a route-bypass/desync: direct /pwn was denied by Envoy, but the second downstream H3 stream received the response for backend-parsed GET /pwn HTTP/1.1. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, destructor of JSON Object results in stack overflow when deeply O(100K) nested objects are present. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.26.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the envoy.filters.http.grpc_stats filter crashes (null pointer dereference / segfault) when a Connect protocol request (Content-Type: application/connect+proto or application/connect+json) hits a direct_response route. A single unauthenticated HTTP request crashes the Envoy process. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, when the %REQUESTED_SERVER_NAME(X:Y)% is used in log format and host related options is specified, like HOST_FIRST, SNI_FIRST, it's possible to crash Envoy when the specified host header is missing in the request headers. This vulnerability is fixed in 1.37.5 and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.36.0 until 1.36.9, 1.37.5, and 1.38.3, a Use-After-Free (UAF) vulnerability leading to a sudden segmentation fault exists in Envoy's ext_authz HTTP filter when processing per-route authorization overrides concurrently with rapid downstream client disconnects. During standard request lifecycles, Envoy instantiates the ext_authz filter with a foundational authorization client object (client_). If a matched route dictates a dynamic per-route HTTP or gRPC authorization service override, the filter generates a localized client. In the vulnerable implementation, this transient client aggressively overwrote the default client_ unique pointer by executing client_ = std::move(per_route_client). When a client rapidly establishes and subsequently tears down a stream (such as rapidly refreshing a protected WebSocket endpoint), the downstream triggers the ConnectionManagerImpl::doDeferredStreamDestroy() -> ActiveStream::onResetStream() lifecycle. Envoy immediately sequences Filter::onDestroy() in an attempt to securely abort dispatched asynchronous authorization check transactions via client_->cancel(). By destructing the default client abruptly during initiateCall, a memory lifecycle misalignment occurs within the async client manager. The stream teardown fails to reliably track and cancel the dynamically bound asynchronous authorization tasks, orchestrating a sequence where a late asynchronous callback from the network evaluates against a heavily destroyed ActiveStream validation span, generating a UAF process crash. This vulnerability is fixed in 1.36.9, 1.37.5, and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a structural flaw was identified in DefaultCertValidator::verifySubjectAltName where the extracted DNS SAN string is cast to a C-style string using .c_str() before being passed to the Utility::dnsNameMatch() algorithm. If the attacker serves a certificate with a dNSName SAN containing an embedded NUL byte, the helper Utility::generalNameAsString captures the complete string including the NUL. However, when .c_str() evaluates it, implicit conversion to absl::string_view inside dnsNameMatch relies on strlen(), prematurely truncating the evaluation context. Envoy evaluates trucated string against the exact required config_san match and returns true, thereby successfully validating the string with the Nul byte for an upstream routing. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.23.0 until 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability has been identified in Envoy's zstd decompressor implementation (ZstdDecompressorImpl). When zstd decompression is enabled, processing a specially crafted, highly compressed zstd payload can lead to massive memory allocation. An attacker can exploit this to cause severe memory exhaustion, potentially resulting in an Out-Of-Memory (OOM) kill and Denial of Service (DoS) for the Envoy proxy. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, in cases where UDP DNS filter is configured with local resolution containing a name with the length of 255 octets or remote resolution for a name of 255 octets long can complete successfully, a query with such name will result in abnormal process termination. The abnormal process termination is triggered by an invalid runtime precondition that the query name is strictly less than 255 octets, contradicting DNS specification rfc1035#section-2.3.4 that the name can be 255 or less octets. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.18.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the router filter contains a null pointer dereference vulnerability when handling HTTP 303 (See Other) internal redirects for body-less non-GET/HEAD requests. When a POST, PUT, DELETE, or PATCH request without a body is sent to a route configured with internal redirect policy that includes 303 in redirect_response_codes, and the upstream responds with HTTP 303, the redirect handling code attempts to drain a request body buffer that was never allocated. This results in a segmentation fault that crashes the entire Envoy process. When route configured with internal_redirect_policy including 303 in redirect_response_codes and upstream must return HTTP 303 response, an unauthenticated attacker can exploit this to cause complete denial of service, terminating all active connections. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.34.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, a vulnerability exists in Envoy's TCP StatsD sink (TcpStatsdSink), where the thread-local flusher buffer can be overflowed by exceptionally long statistic names (e.g., >16KiB). During formatting, TcpStatsdSink reserves a single contiguous memory slice of 16KiB (FLUSH_SLICE_SIZE_BYTES). If formatting a single metric exceeds the remaining capacity, the flusher initiates a buffer rotation but incorrectly continues to allocate another fixed 16KiB slice. If an attacker can trigger a statistic name longer than 16KiB—for example, by sending an HTTP or gRPC request with an extremely long request path (:path) that is recorded by the grpc_stats filter configured with stats_for_all_methods: true—the flusher will attempt to copy the metric name using memcpy operations beyond the allocated heap buffer boundaries. This leads to a heap write overflow, which can cause immediate denial-of-service (process crash) or potential remote code execution (RCE). This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
