Export limit exceeded: 401246 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 401246 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401246 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88392 | 2026-10-05 | N/A | ||
| Unimall v4 is vulnerable to Directory Traversal in FileUploadController.local(). This allows an attacker to execute arbitrary code. | ||||
| CVE-2026-73552 | 1 Envoyproxy | 1 Envoy | 2026-10-05 | 7.5 High |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy HTTP RBAC accepts RFC-valid opaque header bytes but evaluates safe_regex values with RE2's UTF-8 subject semantics. A downstream client can preserve a prohibited marker and add an unrelated obs-text octet, causing RE2::FullMatch to return false and a negative RBAC policy to treat the invalid subject as an ordinary no-match. A byte-oriented route matcher can still observe the marker, allowing the request to reach a route intended to be denied. The relevant scope boundary is that plain positive ALLOW regexes normally fail closed, and exact, prefix, suffix, and contains matchers are not shown to have this subject-domain failure. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. | ||||
| CVE-2026-73511 | 1 Envoyproxy | 1 Envoy | 2026-10-05 | 5.3 Medium |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy normally matches the raw request path, while servlet backends such as Apache Tomcat strip semicolon matrix parameters from each path segment before resolving the resource. Envoy's ignore_path_parameters_in_path_matching option instead truncates at the first semicolon and still does not match per-segment backend behavior. A remote client can use a parameterized protected segment, or a parameter on an earlier segment, to make Envoy select an unprotected fallback while the backend resolves the protected resource. The relevant scope boundary is that the bypass requires both a path-based Envoy decision and a backend that strips semicolon parameters per segment. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. | ||||
| CVE-2026-100809 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-10-05 | 8.1 High |
| Same-origin policy bypass in the DevTools component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157. | ||||
| CVE-2026-103678 | 2 Tnef Project, Verdammelt | 2 Tnef, Tnef | 2026-10-05 | 5.4 Medium |
| A flaw was found in tnef. An attacker can exploit this vulnerability by providing a specially crafted file containing uncompressed Rich Text Format (RTF) data. Because the application fails to properly validate input buffer boundaries before copying data in get_rtf_data_from_buf(), reading beyond the allocated memory occurs. This flaw can cause the application to crash, leading to a Denial of Service (DoS), or leak sensitive memory contents into extracted output files. | ||||
| CVE-2026-88394 | 2026-10-05 | N/A | ||
| WookTeam v1.6.6 and before is vulnerable to a Directory Traversal. The project task export endpoint /api/project/task/export downloads an arbitrary file from the server when the data parameter is supplied with a crafted JSON payload. The file value inside the JSON is concatenated directly into storage_path($file) without any path normalization or directory boundary check, so directory traversal (../) escapes the storage/ directory and response()->download() streams any file readable by the web server process. | ||||
| CVE-2026-73548 | 1 Envoyproxy | 1 Envoy | 2026-10-05 | 7.5 High |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy forwards data for a configured non-WebSocket HTTP upgrade before the upstream accepts the upgrade. An unauthenticated HTTP/2 client can place a complete HTTP/1.1 request in extended CONNECT data; Envoy downgrades the request, writes the data unframed to a keep-alive HTTP/1.1 upstream, and returns the socket to the shared pool while the smuggled response remains queued. A different downstream client can then receive the attacker's response. The relevant scope boundary is that webSocket upgrades, plain CONNECT, disabled backend keep-alive, per-downstream pools, and max_requests_per_connection set to 1 are not affected by the demonstrated path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. | ||||
| CVE-2026-105421 | 2026-10-05 | 5.3 Medium | ||
| Missing Authorization vulnerability in Kit Kit (formerly ConvertKit) for WooCommerce convertkit-for-woocommerce allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Kit (formerly ConvertKit) for WooCommerce: from n/a through 2.2.0. | ||||
| CVE-2026-37604 | 1 Ph7software | 1 Ph7builder | 2026-10-05 | 6.5 Medium |
| pH7Software pH7Builder (pH7 Social Dating CMS) through 18.2.0 resolves the client IP address in _protected/framework/Ip/Ip.class.php from the HTTP_CLIENT_IP and HTTP_X_FORWARDED_FOR headers without verifying the request comes from a trusted proxy. Because the admin login attempt counter and lockout are keyed on this value, a remote unauthenticated attacker bypasses IP-based throttling by sending a different X-Forwarded-For value per request | ||||
| CVE-2026-19184 | 1 Zephyrproject | 1 Zephyr | 2026-10-05 | 8.4 High |
| The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as "large enough" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds. adc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion results past the end of that buffer, at an address and for a length of the caller's choosing. The overrun is bounded by the requested sequence: with sequence->options->extra_samplings set, the sampling loop walks the buffer pointer forward across every sampling, so the total overrun can reach the full size of the supplied buffer (kilobytes for a large extra_samplings). The written words are 16-bit ADC conversion results, so the content is only partially attacker-influenced (via the selected analog input, gain and resolution), but the destination and length are fully controlled — sufficient for kernel memory corruption, a crash, or a userspace-to-kernel privilege escalation. Builds without CONFIG_USERSPACE, or on SoCs other than NXP RW61x with the GAU ADC node enabled, are not exposed to the privilege boundary; there the same defect only causes a silent overflow when the application itself passes an undersized buffer. The fix replaces the ad-hoc check with the shared adc_sequence_validate_buffer() helper (validating against num_channels * sizeof(uint16_t)), stores buffer_size / sizeof(uint16_t) in results_length, and corrects the loop bound to a post-decrement so exactly the available number of slots may be written. | ||||
| CVE-2026-105315 | 1 Django-haystack | 1 Django-haystack | 2026-10-05 | 4.7 Medium |
| A vulnerability has been found in django-haystack up to 3.3.0. Affected is the function _to_python of the file haystack/backends/elasticsearch_backend.py of the component more_like_this Template Tag Handler. Such manipulation of the argument result_class leads to improper neutralization of directives in dynamically evaluated code. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.4.0 is able to address this issue. The name of the patch is eb05f193c9771a68dcc8cfac6674a0d48a52ee9d. It is suggested to upgrade the affected component. | ||||
| CVE-2026-105295 | 2026-10-05 | 7.5 High | ||
| GitAhead 2.5.0 through 2.7.1 contains an insecure update mechanism that installs downloaded updates without integrity or signature verification and permanently ignores TLS errors after one SSL error dialog. Network attackers presenting an invalid certificate once can intercept later automatic update checks, offer a fake version, and execute code as the user upon installation. | ||||
| CVE-2026-105263 | 1 Shaarli | 1 Shaarli | 2026-10-05 | 4.7 Medium |
| A security flaw has been discovered in Shaarli up to 0.16.3. The affected element is the function MetadataController of the file application/front/controller/admin/MetadataController.php of the component Admin Metadata Endpoint. Performing a manipulation of the argument url results in server-side request forgery. The attack may be initiated remotely. Upgrading to version 0.16.4 is sufficient to fix this issue. The patch is named 8ca4de8e7c932a684481f5fbb1229fe16de1f4d2. It is advisable to upgrade the affected component. | ||||
| CVE-2026-105253 | 1 Itsourcecode | 1 Online Admission System Project | 2026-10-05 | 7.3 High |
| A vulnerability was determined in itsourcecode Online Admission System Project 1.0. This issue affects some unknown processing of the file /admin/login1.php. This manipulation of the argument User causes sql injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-105248 | 1 Vgmstream | 1 Vgmstream | 2026-10-05 | 6.3 Medium |
| A security flaw has been discovered in vgmstream up to r2117. This affects the function parse_params/txtp_parse of the file src/meta/txtp_parser.c of the component TXTP File Handler. The manipulation results in out-of-bounds write. The attack may be launched remotely. The patch is identified as 4669d37a6af94866f6f0628678f9f90d46954e8b. It is best practice to apply a patch to resolve this issue. | ||||
| CVE-2026-105238 | 2 Chatgptnextweb, Nextchat | 2 Nextchat, Nextchat | 2026-10-05 | 7.3 High |
| A flaw has been found in ChatGPTNextWeb NextChat up to 2.16.1. This vulnerability affects the function proxyHandler of the file app/api/proxy.ts of the component Proxy Fallback Handler. This manipulation of the argument x-base-url causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-105231 | 1 Kishor-23 | 1 Food-waste-management-system | 2026-10-05 | 7.3 High |
| A vulnerability was detected in kishor-23 food-waste-management-system 411989e3ecb82895e53dca7865f72145f03d7d93/b3a70b2c492dc9904de5be1ad9389bd79b87f82c. The affected element is an unknown function of the file admin/signup.php of the component Admin Registration. The manipulation of the argument email/username/location results in sql injection. It is possible to launch the attack remotely. The exploit is now public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-105225 | 1 Oscommerce | 1 Oscommerce2 | 2026-10-05 | 4.3 Medium |
| A vulnerability was identified in osCommerce osCommerce2 up to 2.3.4.1. This affects the function include of the file includes/classes/payment.php of the component Payment Page. Such manipulation of the argument MODULE_PAYMENT_INSTALLED leads to code injection. The attack can be executed remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-105222 | 2026-10-05 | 7.4 High | ||
| The alexpechkarev/google-maps Laravel package through 12.16 disables TLS certificate verification by default because the bundled config sets ssl_verify_peer to FALSE, which is passed to CURLOPT_SSL_VERIFYPEER. On-path attackers can present any certificate to intercept Google Maps web-service requests, steal the API key from the query string, and tamper with responses. | ||||
| CVE-2026-105217 | 1 Cockpit-hq | 1 Cockpit | 2026-10-05 | 3.1 Low |
| Cockpit CMS 2.12.0 before 2.14.1 disables TLS certificate verification in the cron.php web worker restart request, allowing network attackers to capture the worker token. Man-in-the-middle attackers on the outbound path to site_url can present any certificate to steal the worker/web/token value and start the web worker. | ||||