| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| matrix-hookshot is a Matrix bot for connecting to external services like GitHub, GitLab, JIRA, and more. When Hookshot 6 version 6.0.1 or below, or Hookshot 5 version 5.4.1 or below, is configured with GitHub support, it is vulnerable to a Denial of Service (DoS) whereby it can crash on restart due to a missing check. The impact is greater to you untrusted users can add their own GitHub organizations to Hookshot in order to connect their room to a repository. This vulnerability is fixed in 6.0.2 and 5.4.2. |
| LNbits is a Lightning wallet and accounts system. Paying invoices in Eclair that do not get settled within the internal timeout (about 30s) lead to a payment being considered failed, even though it may still be in flight. This vulnerability can lead to a total loss of funds for the node backend. This vulnerability is fixed in 0.12.6.
|
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). Affected devices do not properly handle malformed TLS handshake messages. This could allow an attacker with network access to the webserver to cause a denial of service resulting in the web server and the device to crash. |
| Improper handling of alternate encoding occurs when Elastic Defend on Windows systems attempts to scan a file or process encoded as a multibyte character. This leads to an uncaught exception causing Elastic Defend to crash which in turn will prevent it from quarantining the file and/or killing the process. |
| A security issue exists within the Studio 5000 Logix Designer add-on profile (AOP) for the ArmorStart Classic distributed motor controller, resulting in denial-of-service. This vulnerability is possible due to the input of invalid values into Component Object Model (COM) methods. |
| A problem with a detection mechanism in the Palo Alto Networks Cortex XDR agent on Windows devices enables a user with Windows non-administrative privileges to disable the agent. This vulnerability can also be leveraged by malware to disable the Cortex XDR agent and then perform malicious activity. |
| loona is an experimental, HTTP/1.1 and HTTP/2 implementation in Rust on top of io-uring. `loona-hpack` suffers from the same vulnerability as the original `hpack` as documented in issue #11. All users who try to decode untrusted input using the Decoder are vulnerable to this exploit. This issue has been addressed in release version 0.4.3. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| While parsing certain malformed PLY files, PCL version 1.14.1 crashes due to an uncaught std::out_of_range exception in PCLPointCloud2::at. This issue could potentially be exploited to cause a denial-of-service (DoS) attack when processing untrusted PLY files. |
| ethereum is a common ethereum structs for Rust. Prior to ethereum crate v0.18.0, signature malleability (according to EIP-2) was only checked for "legacy" transactions, but not for EIP-2930, EIP-1559 and EIP-7702 transactions. This is a specification deviation. The signature malleability itself is not a security issue and not as high of a risk if the ethereum crate is used on a single-implementation blockchain. This issue has been patched in version v0.18.0. A workaround for this issue involves manually checking transaction malleability outside of the crate, however upgrading is recommended. |
| A Denial of Service (DoS) vulnerability in Palo Alto Networks PAN-OS software causes the firewall to unexpectedly reboot when processing a specially crafted LLDP frame sent by an unauthenticated adjacent attacker. Repeated attempts to initiate this condition causes the firewall to enter maintenance mode.
This issue does not apply to Cloud NGFWs or Prisma Access software. |
| Volto is a ReactJS-based frontend for the Plone Content Management System. Versions 16.34.0 and below, 17.0.0 through 17.22.1, 18.0.0 through 18.27.1, and 19.0.0-alpha.1 through 19.0.0-alpha.5, an anonymous user could cause the NodeJS server part of Volto to quit with an error when visiting a specific URL. This issue is fixed in versions 16.34.1, 17.22.2, 18.27.2 and 19.0.0-alpha.6. |
| Hydra is a layer-two scalability solution for Cardano. Prior to version 0.22.0, the process assumes L1 event finality and does not consider failed transactions. Currently, Cardano L1 is monitored for certain events which are necessary for state progression. At the moment, Hydra considers those events as finalized as soon as they are recognized by the node participants making such transactions the target of re-org attacks. The system does not currently consider the fact that failed transactions on the Cardano L1 can indeed appear in blocks because these transactions are so infrequent. This issue has been patched in version 0.22.0. |
| Manifest offers users a one-file micro back end. Prior to version 4.9.2, Manifest employs a weak password hashing implementation that uses SHA3 without a salt. This exposes user passwords to a higher risk of being cracked if an attacker gains access to the database. Without the use of a salt, identical passwords across multiple users will result in the same hash, making it easier for attackers to identify and exploit patterns, thereby accelerating the cracking process. Version 4.9.2 fixes the issue. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| go-spacemesh is a Go implementation of the Spacemesh protocol full node. Nodes can publish activations transactions (ATXs) which reference the incorrect previous ATX of the Smesher that created the ATX. ATXs are expected to form a single chain from the newest to the first ATX ever published by an identity. Allowing Smeshers to reference an earlier (but not the latest) ATX as previous breaks this protocol rule and can serve as an attack vector where Nodes are rewarded for holding their PoST data for less than one epoch but still being eligible for rewards. This vulnerability is fixed in go-spacemesh 1.5.2-hotfix1 and Spacemesh API 1.37.1. |
| The Permission Model assumes that any path starting with two backslashes \ has a four-character prefix that can be ignored, which is not always true. This subtle bug leads to vulnerable edge cases. |
| In EMQX before 5.8.6, administrators can install arbitrary novel plugins via the Dashboard web interface. NOTE: the Supplier's position is that this is the intended behavior; however, 5.8.6 adds a defense-in-depth feature in which a plugin's acceptability (for later Dashboard installation) is set by the "emqx ctl plugins allow" CLI command. |
| NeuVector stores user passwords and API keys using a simple, unsalted hash. This method is vulnerable to rainbow table attack (offline attack where hashes of known passwords are precomputed). |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. |
