| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Academy LMS WordPress plugin before 4.0.0 does not verify course enrollment or object ownership when returning a lesson's content through one of its REST API routes, allowing users with a self-registerable student account to read the full content of arbitrary lessons, including lessons of paid or private courses they are not enrolled in. |
| The Academy LMS WordPress plugin before 4.0.0 does not verify that a quiz question belongs to the course the requesting user is authorized to access before returning that question's answer options, allowing any authenticated user with access to a single course, such as an enrolled student, to read the quiz answer options of questions belonging to other courses they are not enrolled in. |
| An incorrect buffer size calculation vulnerability exists in tinyexpr commit 4a7456e in new_expr(). For arity-0 expression nodes, including constants, variables, and zero-argument functions, the function allocates less memory than sizeof(te_expr) but treats the returned allocation as a complete te_expr object. This results in undefined behavior and can cause deterministic process termination in UBSan-instrumented builds. |
| In updateState of DeviceAdminAppsPreferenceController.java, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| ZBar commit 2ea2ca58 contains an undefined-behavior vulnerability in the Code 128 decode6() function. When processing specially crafted Code 128 input, decode_e() can return -1 for an invalid edge pattern, and decode6() subsequently left-shifts this negative signed value while constructing the edge signature. The operation invokes undefined behavior and can terminate trap-mode UBSan builds with SIGILL, resulting in denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source()
pmc->sflist is read locklessly under rcu_read_lock() by
inet6_mc_check() during packet reception in the UDP and RAW
multicast receive paths.
ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place
when adding or removing a source filter. Additionally, when expanding
the filter buffer, newpsl was published via rcu_assign_pointer()
before writing the new source into the array.
Because 16-byte struct in6_addr writes are not atomic and array
shifting is not synchronized with RCU readers, concurrent readers in
inet6_mc_check() could read torn IPv6 addresses or observe
duplicated/missed source entries.
Fix this by switching ip6_mc_source() to copy-on-write RCU updates:
allocate and fully populate newpsl before publishing it via
rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(),
matching ip6_mc_msfilter().
Also remove the now unused IP6_SFBLOCK macro. |
| Feehi CMS 2.1.1 is vulnerable to Directory Traversal. An authenticated backend user with article edit permission can delete arbitrary files writable by the PHP process. Article image metadata is used to construct a filesystem path and is passed to `unlink()` without path traversal or directory validation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring entries keep
their old buffer size until they are replenished.
A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer
packet produced a one-byte KASAN use-after-free write before this change.
The same test passed after the change. The driver object also builds
with W=1. This was not tested on physical LAN743x hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyond the request_sock allocation when they access inet_sock or
ipv6_pinfo state.
Resolve the owner with skb_to_full_sk() in both callbacks and bail out when
no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error
logic, which already reasons about full sockets with skb_to_full_sk(). |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Cleanup POSIX timers right after de_thread()
A per-thread CPU timer holds a reference to the PID of the thread it is
attached to and, while it is armed, its node is queued in that thread's
posix_cputimers. The task is looked up by that PID.
When a non-leader thread exec()s, de_thread() changes which task owns
that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL,
but the node is still queued on tsk, which is alive. timer_lock_sighand()
takes a failed lookup to mean that the node is already dequeued, so it
has nothing to undo.
begin_new_exec() calls posix_cpu_timers_exit(me) right after
exec_task_namespaces() and that removes the leftover node, so the state
normally stays invisible. But bprm->point_of_no_return is set before
de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or
exec_task_namespaces() fails, the task dies before it gets there.
exit_itimers() then frees the k_itimer while its node is still queued,
and reaping tsk later erases that freed node from the rbtree.
In short:
the non-leader thread B the parent
timer_create(CLOCK_THREAD_CPUTIME_ID)
timer_settime()
arm_timer() // the node is queued on B
execve()
de_thread(B)
exchange_tids(B, leader) // B's PID now belongs to the leader
release_task(leader)
__exit_signal(leader)
posix_cpu_timers_exit(leader) // cleans leader's queue, not B's
__unhash_process(leader) // that PID has no task anymore
exec_mmap()
mmap_read_lock_killable(old_mm)
kill(B, SIGKILL)
// -EINTR
get_signal()
do_exit()
exit_itimers()
posix_timer_delete()
posix_cpu_timer_del()
posix_timer_unhash_and_free() // freed while still queued
wait4()
release_task(B)
posix_cpu_timers_exit(B)
cleanup_timerqueue()
timerqueue_del() // use-after-free
Move the POSIX timer cleanup right after de_thread() before any of the
later failure conditions brings the task into do_exit().
[ tglx: Move the cleanup right after de_thread() ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: lock the socket in sock_gettstamp()
sk->sk_flags must only be changed while holding the socket lock,
because sock_set_flag() and sock_reset_flag() use non atomic
operations (__set_bit() and __clear_bit()).
sock_gettstamp() is one of the last places where a bit of sk->sk_flags
is changed from a syscall without owning the socket lock, through
sock_enable_timestamp(sk, SOCK_TIMESTAMP).
sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags
without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp,
sunrpc, wireguard) need a careful audit, this will be addressed in a
separate patch.
Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free
caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind()
can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set,
because both threads perform a read-modify-write on the same word.
CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW)
-------------------------------- ----------------------------
read sk_flags = F read sk_flags = F
compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP)
store F | BIT(SOCK_RCU_FREE)
sk_add_node_rcu(sk, ...)
store F | BIT(SOCK_TIMESTAMP)
After the lost update, SOCK_RCU_FREE is clear while the socket is
visible to lockless UDP receive lookups. sk_destruct() then frees
the socket immediately instead of waiting for a RCU grace period,
while the receive path still holds a reference-less pointer to it:
BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410
Read of size 8 at addr ffff888008806610 by task exploit/207
CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1
ipv4_pktinfo_prepare+0x30/0x410
udp_queue_rcv_one_skb+0x51c/0x1180
udp_unicast_rcv_skb+0x109/0x350
ip_protocol_deliver_rcu+0x14b/0x310
ip_local_deliver_finish+0x29d/0x390
ip_local_deliver+0x24d/0x2a0
Only grab the socket lock when SOCK_TIMESTAMP has to be set,
to keep the common case lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba
The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified
IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba().
While doing so, the passed in argument npages is ignored and constant
value '1' is used leaving out a possible overflow as the callers can
legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT
cases.
Fix this by accounting for 'npages', checking for arithmetic overflow,
and verifying that the entire requested range (ioba - offset + npages)
does not exceed the table capacity 'size'. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do. |
| deeptutor 1.4.0 contains an authorization bypass through a user-controlled object identifier in TurnRuntimeManager.regenerate_last_turn. A remote caller can enumerate or obtain a session_id and trigger regenerate on another user's session. |
| An issue in dormakaba evolo Service (all versions) allows a remote attacker to execute arbitrary code as SYSTEM via a .NET component. |
| An issue in Mercusys AC12 V2 allows a local attacker to execute arbitrary code via the storage of information in plaintext |
| An issue in Mercusys AC12 V2 allows a local attacker to execute arbitrary code via the UART serial interface on the printed circuit board (PCB) |
