Export limit exceeded: 362066 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362066 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42440 | 1 Apache | 1 Opennlp | 2026-06-29 | 7.5 High |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader Versions Affected: before 1.9.5 before 2.5.9 before 3.0.0-M3 Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. | ||||
| CVE-2026-9705 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-29 | 6.5 Medium |
| A flaw was found in Keycloak's client registration service. A remote attacker, possessing a previously issued Registration Access Token (RAT), could exploit this vulnerability to re-enable a client that an administrator had explicitly disabled. This bypasses security controls, allowing the attacker to reset the client's secret and potentially regain privileged API access. The primary impact includes unauthorized information disclosure and potential integrity compromise. | ||||
| CVE-2026-41991 | 1 Gnu | 1 Gzip | 2026-06-29 | 6.0 Medium |
| GNU gzip contains a vulnerability in the gzexe utility related to insecure temporary file handling. When the mktemp utility is not available in the user’s PATH, gzexe falls back to constructing a temporary file path based solely on the process ID (PID). This predictable filename is created without exclusive access or existence checks. A local attacker can pre‑create the predicted temporary file path as a symbolic link pointing to an arbitrary file writable by the victim. When gzexe runs, it follows the symlink and overwrites the target file, resulting in a time‑of‑check to time‑of‑use (TOCTOU) condition that allows arbitrary file overwrite. This issue has been fixed in the commit 4e6f8b24ab823146ab8776f0b7fe486ab34d4269 | ||||
| CVE-2026-41992 | 1 Gnu | 1 Gzip | 2026-06-29 | N/A |
| GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation. By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer. This issue has been fixed in the commit 63dbf6b3b9e6e781df1a6a64e609b10e23969681 | ||||
| CVE-2026-54369 | 1 Acl Project | 1 Acl | 2026-06-29 | 7.1 High |
| acl before version 2.4.0 contains a symlink traversal vulnerability in the libacl pathname-based functions acl_get_file(), acl_set_file(), acl_extended_file(), and acl_delete_def_file() that allows local attackers to escalate privileges by replacing any pathname component with a symbolic link. Attackers who control any component of a pathname processed by a privileged caller can redirect ACL read or write operations to arbitrary files or directories, enabling unauthorized manipulation of access control lists and local privilege escalation. | ||||
| CVE-2026-13676 | 1 Fast-uri | 1 Fast-uri | 2026-06-29 | 7.5 High |
| fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks. | ||||
| CVE-2026-50766 | 1 Koha | 1 Koha | 2026-06-29 | 5.4 Medium |
| A stored cross-site scripting (XSS) vulnerability in the OPAC item detail page of Koha Library Management System 0 through 25.11 versions allow an authenticated remote attacker with edit_items permission to inject arbitrary web scripts via the item public notes field (items.itemnotes). | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-53320 | 1 Linux | 1 Linux Kernel | 2026-06-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy] | ||||
| CVE-2026-48743 | 1 Envoyproxy | 1 Envoy | 2026-06-29 | 7.5 High |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, Envoy can translate a downstream HTTP/3 request that is complete at the transport layer (HEADERS with FIN / headers-only close) but still carries a nonzero Content-Length into a complete upstream HTTP/1 request with unresolved body debt. In an HTTP/1 upstream deployment where the origin replies before reading the declared body and keeps the connection reusable, the beginning of the next Envoy-generated upstream request can be consumed as the first request's body. The remaining bytes are then parsed by the origin as a new HTTP/1 request. This was reproduced as a route-bypass/desync: direct /pwn was denied by Envoy, but the second downstream H3 stream received the response for backend-parsed GET /pwn HTTP/1.1. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. | ||||
| CVE-2026-53576 | 1 Kestra-io | 1 Kestra | 2026-06-29 | 10 Critical |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, the authentication filter for the REST API (@Filter("/api/v1/**")) treats any request whose path ends in /configs as the public instance-config endpoint and forwards it without a credential check. kestra addresses its resources by URL path segments that the caller chooses (/api/v1/{tenant}/flows/{namespace}, /api/v1/{tenant}/executions/{namespace}/{id}, /api/v1/{tenant}/namespaces/{namespace}/kv/{key}). An anonymous caller picks the literal configs as the final segment, and the request bypasses Basic-Auth entirely. Because the bypass reaches the flow-create and execution-trigger routes, an unauthenticated caller creates a flow containing a Shell or Process task and runs it. The task executes as root inside the kestra container. The official docker-compose.yml mounts /var/run/docker.sock, so root in the container reaches the host Docker daemon. This vulnerability is fixed in 1.0.45 and 1.3.21. | ||||
| CVE-2026-53303 | 1 Linux | 1 Linux Kernel | 2026-06-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation. | ||||
| CVE-2026-13545 | 1 D-link | 1 Dcs-935l | 2026-06-29 | 8.8 High |
| A vulnerability has been found in D-Link DCS-935L 1.10.01. This affects the function sub_400E40 of the file setconf.cgi of the component POST Parameter Handler. Such manipulation of the argument UID leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-53296 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm. | ||||
| CVE-2026-53306 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: hvc_iucv: fix off-by-one in number of supported devices MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8. This is the number of entries in: static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; Sometimes hvc_iucv_table[] is limited by: (a) if (num > hvc_iucv_devices) // for error detection or (b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places (so these 2 don't agree; second one appears to be correct to me.) hvc_iucv_devices can be 0..8. This is a counter. (c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8]. Oops. | ||||
| CVE-2026-53294 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs. | ||||
| CVE-2026-53295 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: add sanity check for channel array Fail gracefully if there is no channel array attached to the mailbox controller. Otherwise the later dereference will cause an OOPS which might not be seen because mailbox controllers might instantiate very early. Remove the comment explaining the obvious while here. | ||||
| CVE-2026-53304 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size. | ||||
| CVE-2026-53279 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/gma500/oaktrail_lvds: fix hang on init failure The LVDS init code looks up an I2C adapter using i2c_get_adapter() and tries to read the EDID before falling back to allocating and registering its own adapter. The error handling does not separate these cases so on a late init failure it will try to deregister and free also an adapter that had previously been registered. Since i2c_get_adapter() takes another reference to the adapter, deregistration hangs indefinitely while waiting for the reference to be released. Fix this by only destroying adapters allocated during LVDS init on errors. | ||||
| CVE-2026-48042 | 1 Envoyproxy | 1 Envoy | 2026-06-29 | 7.5 High |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, destructor of JSON Object results in stack overflow when deeply O(100K) nested objects are present. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. | ||||