Export limit exceeded: 417551 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417551 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-106633 | 1 Adobe | 2 Adobe Experience Manager, Experience Manager | 2026-10-30 | 5.4 Medium |
| Adobe Experience Manager is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. | ||||
| CVE-2026-99216 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Don't reset VMBus connection state on error/exit paths In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded. | ||||
| CVE-2026-99214 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Move packet RAM enable to PM runtime Audio can be triggered by the HPD handler and start up before video has been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe. vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the infoframe, however, if the video hasn't been enabled, vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes, causing the following splat: [ 201.570266] ------------[ cut here ]------------ [ 201.570293] Packet RAM has to be on to store the packet. [ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606 [...] [ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 201.758499] Call trace: [ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P) [ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4] [ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper] [ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper] [ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4] [ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper] [ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec] [ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core] [ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core] [ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core] [ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm] [ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm] [ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm] [ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm] [ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm] [ 201.846802] __arm64_sys_ioctl+0x88/0xd8 [ 201.850769] invoke_syscall+0x48/0xf4 [ 201.854470] el0_svc_common+0x80/0xd8 [ 201.858171] do_el0_svc+0x1c/0x28 [ 201.861520] el0_svc+0x3c/0xb0 [ 201.864605] el0t_64_sync_handler+0x68/0xdc [ 201.868834] el0t_64_sync+0x198/0x19c [ 201.872536] ---[ end trace 0000000000000000 ]--- Considering that Packet RAM enable is essentially a power management configuration, move its enabling/disabling to the Runtime PM hooks. Note that post_crtc_disable() still stops all infoframes, but keeps Packet RAM enabled, leaving it to be disabled by runtime suspend. | ||||
| CVE-2026-99213 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-established Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link. | ||||
| CVE-2026-99212 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure rds_rdma_cm_event_handler_cmn() hands the return value of rdma_resolve_route() straight back to the rdma_cm on RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM from the route work allocation, an SA query that cannot be set up, a RoCE route with no usable device - makes addr_handler() destroy the id the event was delivered on. That id is ic->i_cm_id, and nothing clears the pointer: the connection sits in RDS_CONN_CONNECTING with a freed id until its shutdown calls rdma_disconnect() and rdma_destroy_id() on it. The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect() forces a zero return while ic->i_cm_id == cm_id, as the comment there explains. Do the same here - drop the connection and return 0 - so the id stays RDS's to destroy from the shutdown, and the reconnect gets a fresh one. | ||||
| CVE-2026-99211 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: netlink: reset skb headers before unicast and multicast filtering Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code. | ||||
| CVE-2026-99206 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix race in discovery auth updates Separate configfs opens can concurrently update the discovery AuthMethod parameter. Both callers may free the same value in iscsi_update_param_value(), causing a double-free. Protect the lookup and replacement with the discovery TPG access lock, as used by the other TPG configfs parameter updates. | ||||
| CVE-2026-99204 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: Protect the recovery list during debugfs reads Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] </TASK> Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.] | ||||
| CVE-2026-99203 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on writer setup failure F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before. | ||||
| CVE-2026-99202 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result. | ||||
| CVE-2026-99201 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netlink: avoid hashing the network namespace pointer The netlink rhashtable key includes a raw struct net pointer and a user-controlled port ID. Both /proc/net/netlink and socket diagnostics expose the table's bucket order. By binding and rebinding chosen NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal buckets and recover the low bits of the Jenkins hash. Its 32-bit seed and the limited set of kernel-image slides can then be searched offline to recover the address of init_net. Use the namespace's unique, non-address net_cookie in the comparison key instead. It is assigned before the per-net initializers run and remains unchanged for the namespace's lifetime. The lookup key and object hash are still built by netlink_compare_arg_init(), keeping lookup, insertion, removal and rehashing consistent while preserving namespace separation. Neither public table walker needs to change. Reading the socket's namespace cookie in netlink_compare() is safe under RCU, including during namespace teardown. netlink_release() removes the socket from the hash table and defers its final put with call_rcu(). cleanup_net() runs the per-net exit methods and waits for outstanding RCU callbacks with rcu_barrier() before freeing namespace storage. Unlike ns.ns_id, net_cookie is also available and initialized during setup_net() in older stable kernels, making the change straightforward to backport to v5.15 and later. | ||||
| CVE-2026-99192 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. | ||||
| CVE-2026-99191 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. | ||||
| CVE-2026-99190 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths A drive-by review by Sashiko reports that, after a failed call to gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly, bypassing the freeing of possibly alloced bitmaps, potentially leaking memory. It is an unlikely error path, but is possible. Defer the return code check until after the bitmap_free() block. | ||||
| CVE-2026-99187 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx. | ||||
| CVE-2026-99182 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided. | ||||
| CVE-2026-99181 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed. | ||||
| CVE-2026-99180 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone. | ||||
| CVE-2026-99179 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix note pool publication race in watch_queue_set_size() There is a race between watch_queue_set_size() and post_one_notification(). watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and nr_notes with plain stores, and post_one_notification() reads them with plain loads under a different lock, so nothing orders the four stores against the poster's loads: depending on the build, notes can be stored last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch attach to a queue before it is sized, post_one_notification() can already be running on another CPU at that moment: it reads nr_notes > 0, passes its bounds check, and then reads notes while it is still NULL, dereferencing notes[0]. An unprivileged user triggers this reliably by watching one of its own keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE) on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU, triggering: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0 Call Trace: __post_watch_notification+0x148/0x180 keyctl_setperm_key+0x119/0x130 do_syscall_64+0x108/0x4c0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception in interrupt Fix this by publishing nr_notes last with smp_store_release(), and by reading it once with smp_load_acquire() in post_one_notification() before the bitmap and the page array are touched. A poster that observes a non-zero nr_notes then also observes the pool behind it; one that observes zero drops the notification as before. | ||||
| CVE-2026-99178 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context An async #PF "page not present" event arrives through the #PF vector, and its reason sits in the per-CPU apf_reason.flags until __kvm_handle_async_pf() reads and clears it. If an NMI arrives after the event is injected and before the #PF handler reads the flags, and the NMI handler itself takes a #PF, that fault reads and clears the flags belonging to the #PF it interrupted. It then finds interrupts disabled in the NMI context it interrupted, and panics: Kernel panic - not syncing: Host injected async #PF in interrupt disabled region Call Trace: <NMI> panic+0x52/0x60 __kvm_handle_async_pf+0xb0/0xb0 exc_page_fault+0x71/0xb0 asm_exc_page_fault+0x27/0x30 RIP: 0010:__get_user_nocheck_8+0x6/0x20 perf_callchain_user+0x147/0x1a0 get_perf_callchain+0x12d/0x1c0 ... perf_event_nmi_handler+0x26/0x50 exc_nmi+0xe8/0x110 RIP: 0010:asm_exc_page_fault+0x0/0x30 </NMI> The last RIP line shows the NMI landing on the first instruction of the #PF entry. perf with user call chains takes such a fault: the sampling NMI walks the user stack with __get_user(), which faults when a saved frame pointer is not a valid user address or the walk runs off the top of the stack. The same window exists when KVM, running as an L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after a #PF VM-exit. The NMI entry code saves and restores CR2 for this nesting, but not the async #PF reason. Andy Lutomirski described the race, with perf as the example, when async #PF delivery was reworked in 2020 [1]. Saving and clearing the flags across the NMI, next to CR2, was discussed there but not merged. Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS, so the host delivers "page not present" only for user mode faults and a kernel-mode fault in NMI context (including kernel-mode #MC and #DB) cannot be an async page fault. In that case, return without touching the flags so that the interrupted handler finds them intact. Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot whose memory is served on demand through userfaultfd, so that reading it back takes async #PFs, while every thread samples hardware cycles with user call chains and points its frame pointer at an unmapped page. Without this patch the guest panicked as above in 3 of 3 runs. With it, the guest survived 3 of 3 runs of 60 seconds, and the host counted 148,441 to 153,334 kvm_async_pf_not_present events in the first 20 seconds of each. On 6.18.50 the results were the same: the guest panicked without the patch and survived with it. | ||||