In the Linux kernel, the following vulnerability has been resolved:

drm/vc4: hdmi: Move packet RAM enable to PM runtime

Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:

[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---

Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.

Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend.

Project Subscriptions

Vendors Products
Linux Kernel Subscribe
Advisories

No advisories yet.

Fixes

Solution

No solution given by the vendor.


Workaround

No workaround given by the vendor.

History

Wed, 28 Oct 2026 10:45:00 +0000

Type Values Removed Values Added
Description In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Move packet RAM enable to PM runtime Audio can be triggered by the HPD handler and start up before video has been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe. vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the infoframe, however, if the video hasn't been enabled, vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes, causing the following splat: [ 201.570266] ------------[ cut here ]------------ [ 201.570293] Packet RAM has to be on to store the packet. [ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606 [...] [ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 201.758499] Call trace: [ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P) [ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4] [ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper] [ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper] [ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4] [ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper] [ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec] [ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core] [ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core] [ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core] [ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm] [ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm] [ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm] [ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm] [ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm] [ 201.846802] __arm64_sys_ioctl+0x88/0xd8 [ 201.850769] invoke_syscall+0x48/0xf4 [ 201.854470] el0_svc_common+0x80/0xd8 [ 201.858171] do_el0_svc+0x1c/0x28 [ 201.861520] el0_svc+0x3c/0xb0 [ 201.864605] el0t_64_sync_handler+0x68/0xdc [ 201.868834] el0t_64_sync+0x198/0x19c [ 201.872536] ---[ end trace 0000000000000000 ]--- Considering that Packet RAM enable is essentially a power management configuration, move its enabling/disabling to the Runtime PM hooks. Note that post_crtc_disable() still stops all infoframes, but keeps Packet RAM enabled, leaving it to be disabled by runtime suspend.
Title drm/vc4: hdmi: Move packet RAM enable to PM runtime
First Time appeared Linux
Linux linux Kernel
CPEs cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Vendors & Products Linux
Linux linux Kernel
References

Projects

Sign in to view the affected projects.

cve-icon MITRE

Status: PUBLISHED

Assigner: Linux

Published:

Updated: 2026-10-28T10:36:07.867Z

Reserved: 2026-09-25T10:25:14.401Z

Link: CVE-2026-99214

cve-icon Vulnrichment

No data.

cve-icon NVD

Status : Received

Published: 2026-10-28T11:17:42.887

Modified: 2026-10-28T11:17:42.887

Link: CVE-2026-99214

cve-icon Redhat

No data.

cve-icon OpenCVE Enrichment

No data.

Weaknesses

No weakness.