| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.21 and 3.7.5, there is a high severity vulnerability in Traefik's Kubernetes Gateway provider affecting the crossProviderNamespaces allowlist. For HTTPRoute rules that declare multiple (WRR) backendRefs, Traefik evaluates the allowlist against the target backendRef.namespace instead of the route's own namespace. As a result, an HTTPRoute created in a namespace that is not allow-listed can reference a cross-provider TraefikService such as api@internal, dashboard@internal or rest@internal by pointing backendRef.namespace at an allow-listed namespace covered by a Gateway API ReferenceGrant, exposing internal Traefik services on the data plane. Exploitation requires the ability to create an accepted HTTPRoute and a matching ReferenceGrant from an allow-listed namespace; it does not require any change to Traefik static configuration, RBAC, or the deployment itself. This vulnerability is fixed in 3.6.21 and 3.7.5. |
| An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.5, FortiAnalyzer 7.4.0 through 7.4.9, FortiAnalyzer 7.2.0 through 7.2.11, FortiAnalyzer 7.0.0 through 7.0.15, FortiManager 7.6.0 through 7.6.5, FortiManager 7.4.0 through 7.4.9, FortiManager 7.2.0 through 7.2.11, FortiManager 7.0.0 through 7.0.15, FortiNAC-F 7.6.3 through 7.6.5, FortiOS 7.6.0 through 7.6.5, FortiOS 7.4.0 through 7.4.10, FortiOS 7.2.0 through 7.2.12, FortiOS 7.0.0 through 7.0.18, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4.0 through 7.4.12, FortiProxy 7.2.0 through 7.2.15, FortiProxy 7.0.0 through 7.0.22, FortiWeb 8.0.0 through 8.0.3, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4.0 through 7.4.11 may allow an attacker with a FortiCloud account and a registered device to log into other devices registered to other accounts, if FortiCloud SSO authentication is enabled on those devices. |
| A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution. |
| A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system.
This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system. |
| A malicious actor with access to the network could exploit a Path Traversal vulnerability found in the UniFi Network Application to access files on the underlying system that could be manipulated to access an underlying account. |
| A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi OS devices to execute a Command Injection. |
| InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a command injection vulnerability in the file upload function. The vulnerability allows remote attackers to execute arbitrary commands as root via a crafted input. |
| An issue in the sqlo_place_dt_set component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| An issue in the sqlo_strip_in_join component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| An issue in the sqlo_try_in_loop component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| The Infility Global Infility Global WordPress plugin before 2.15.20 for WordPress does not sanitize or validate the orderby and order parameters in the import_list(), url_detail(), and file_detail() admin page callbacks before using them in SQL queries, allowing authenticated attackers with Editor-level access or higher to perform time-based blind SQL injection and extract sensitive data from the database. The ImportData module must be enabled via the Infility Global WordPress plugin before 2.15.20's module toggle page. |
| The Infility Global WordPress plugin before 2.15.19 does not properly sanitize and escape some parameters before using them in SQL statements, leading to a SQL Injection vulnerability exploitable by authenticated users with Subscriber-level access and above. |
| The Simple Basic Contact Form WordPress plugin through 20250114 does not escape user-supplied input before reflecting it into the contact form output on validation errors, leading to a Reflected Cross-Site Scripting vulnerability that unauthenticated attackers can exploit against site visitors via a crafted link or cross-site form submission. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 3.7.3, there is a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in 3.7.3. |
| A command injection vulnerability was discovered in the `rpmuncompress` utility of RPM. When extracting certain archive formats (ZIP, 7z, GEM) to a specified destination directory, the tool inserts the archive's top-level folder name into a shell command without properly sanitizing it. A specially crafted archive containing shell metacharacters in its folder name can execute arbitrary commands as the user running the extraction. |
| Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3. |
| Idira Vendor PAM - Self-Hosted Connector versions prior 1.1.100504 under specific conditions and configuration scenarios, TLS certificate validation may not be fully enforced. CyberArk Security Bulletin: CA26-17 |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3. |
| Iperius Remote 1.7.0 contains an unquoted service path vulnerability that allows local users to execute arbitrary code with SYSTEM privileges by exploiting the service installation path. When installed from directories containing spaces, attackers can place malicious executables in the path to be executed with elevated privileges during service startup or system reboot. |
| Matrix42 Remote Control Host 3.20.0031 contains an unquoted service path vulnerability in the FastViewerRemoteService and FastViewerRemoteProxy services that allows local users to execute arbitrary code with SYSTEM privileges. Attackers can place a malicious executable in the Program Files directory with a crafted name to be executed by the service during startup, gaining elevated privileges. |
