| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server information leak for the CDA Server process memory can occur when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning. |
| General Industrial Controls Lynx+ Gateway is vulnerable to a weak password requirement vulnerability, which may
allow an attacker to execute a brute-force attack resulting in
unauthorized access and login. |
| IDExpert from CHANGING Information Technology does not properly validate a specific parameter in the administrator interface, allowing remote attackers with administrative privileges to inject and execute OS commands on the server. |
| Xibo is an Open Source Digital Signage platform with a web content management system and Windows display player software. In affected versions some request headers are not correctly sanitised when stored in the session and display tables. These headers can be used to inject a malicious script into the session page to exfiltrate session IDs and User Agents. These session IDs / User Agents can subsequently be used to hijack active sessions. A malicious script can be injected into the display grid to exfiltrate information related to displays. Users should upgrade to version 3.3.10 or 4.0.9 which fix this issue. Customers who host their CMS with the Xibo Signage service have already received an upgrade or patch to resolve this issue regardless of the CMS version that they are running. Upgrading to a fixed version is necessary to remediate. Patches are available for earlier versions of Xibo CMS that are out of security support: 2.3 patch ebeccd000b51f00b9a25f56a2f252d6812ebf850.diff. 1.8 patch a81044e6ccdd92cc967e34c125bd8162432e51bc.diff. There are no known workarounds for this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Ensure timer ID search-loop limit is valid
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock. |
| VestaCP 0.9.8-26 contains a session token vulnerability in the LoginAs module that allows remote attackers to manipulate authentication tokens. Attackers can exploit insufficient token validation to access user accounts and perform unauthorized login requests without proper administrative permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: qmi_encdec: Restrict string length in decode
The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost
adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled
when unlock. DEADLOCK might happen if we have held other locks and disabled
IRQ before invoking it.
Fix it by using spin_lock_irqsave() instead, which can keep IRQ state
consistent with before when unlock.
================================
WARNING: inconsistent lock state
5.10.0-02758-g8e5f91fd772f #26 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes:
ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq
ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390
{IN-HARDIRQ-W} state was registered at:
__lock_acquire+0x3d7/0x1070
lock_acquire+0x197/0x4a0
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3b/0x60
bfq_idle_slice_timer_body
bfq_idle_slice_timer+0x53/0x1d0
__run_hrtimer+0x477/0xa70
__hrtimer_run_queues+0x1c6/0x2d0
hrtimer_interrupt+0x302/0x9e0
local_apic_timer_interrupt
__sysvec_apic_timer_interrupt+0xfd/0x420
run_sysvec_on_irqstack_cond
sysvec_apic_timer_interrupt+0x46/0xa0
asm_sysvec_apic_timer_interrupt+0x12/0x20
irq event stamp: 837522
hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore
hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40
hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq
hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50
softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec
softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&bfqd->lock);
<Interrupt>
lock(&bfqd->lock);
*** DEADLOCK ***
3 locks held by kworker/2:3/388:
#0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0
#1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0
#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq
#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390
stack backtrace:
CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kthrotld blk_throtl_dispatch_work_fn
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167
print_usage_bug
valid_state
mark_lock_irq.cold+0x32/0x3a
mark_lock+0x693/0xbc0
mark_held_locks+0x9e/0xe0
__trace_hardirqs_on_caller
lockdep_hardirqs_on_prepare.part.0+0x151/0x360
trace_hardirqs_on+0x5b/0x180
__raw_spin_unlock_irq
_raw_spin_unlock_irq+0x24/0x40
spin_unlock_irq
adjust_inuse_and_calc_cost+0x4fb/0x970
ioc_rqos_merge+0x277/0x740
__rq_qos_merge+0x62/0xb0
rq_qos_merge
bio_attempt_back_merge+0x12c/0x4a0
blk_mq_sched_try_merge+0x1b6/0x4d0
bfq_bio_merge+0x24a/0x390
__blk_mq_sched_bio_merge+0xa6/0x460
blk_mq_sched_bio_merge
blk_mq_submit_bio+0x2e7/0x1ee0
__submit_bio_noacct_mq+0x175/0x3b0
submit_bio_noacct+0x1fb/0x270
blk_throtl_dispatch_work_fn+0x1ef/0x2b0
process_one_work+0x83e/0x13f0
process_scheduled_works
worker_thread+0x7e3/0xd80
kthread+0x353/0x470
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: fix potential deadlock in netlink_set_err()
syzbot reported a possible deadlock in netlink_set_err() [1]
A similar issue was fixed in commit 1d482e666b8e ("netlink: disable IRQs
for netlink_lock_table()") in netlink_lock_table()
This patch adds IRQ safety to netlink_set_err() and __netlink_diag_dump()
which were not covered by cited commit.
[1]
WARNING: possible irq lock inversion dependency detected
6.4.0-rc6-syzkaller-00240-g4e9f0ec38852 #0 Not tainted
syz-executor.2/23011 just changed the state of lock:
ffffffff8e1a7a58 (nl_table_lock){.+.?}-{2:2}, at: netlink_set_err+0x2e/0x3a0 net/netlink/af_netlink.c:1612
but this lock was taken by another, SOFTIRQ-safe lock in the past:
(&local->queue_stop_reason_lock){..-.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix NULL dereference in ni_write_inode
Syzbot reports a NULL dereference in ni_write_inode.
When creating a new inode, if allocation fails in mi_init function
(called in mi_format_new function), mi->mrec is set to NULL.
In the error path of this inode creation, mi->mrec is later
dereferenced in ni_write_inode.
Add a NULL check to prevent NULL dereference. |
| WEBIGniter 28.7.23 contains a cross-site scripting vulnerability in the user creation process that allows unauthenticated attackers to execute malicious JavaScript code, enabling potential XSS attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
um: vector: Fix memory leak in vector_config
If the return value of the uml_parse_vector_ifspec function is NULL,
we should call kfree(params) to prevent memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119
Call Trace:
<TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:380)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_write (drivers/tty/vt/vc_screen.c:664)
vfs_write (fs/read_write.c:582 fs/read_write.c:564)
...
<TASK>
Allocated by task 1213:
kmalloc_trace (mm/slab_common.c:1064)
vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680
drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058)
con_install (drivers/tty/vt/vt.c:3334)
tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415
drivers/tty/tty_io.c:1392)
tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:921)
vfs_open (fs/open.c:1052)
...
Freed by task 4116:
kfree (mm/slab_common.c:1016)
vc_port_destruct (drivers/tty/vt/vt.c:1044)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2778)
...
The buggy address belongs to the object at ffff8880beab8800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)
The buggy address belongs to the physical page:
page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0xbeab8
head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0
pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix mapping to non-allocated address
[Why]
There is an issue mapping non-allocated location of memory.
It would allocate gpio registers from an array out of bounds.
[How]
Patch correct numbers of bounds for using. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856. |
| HGW BL1500HM Ver 002.001.013 and earlier contains a use of week credentials issue. A network-adjacent unauthenticated attacker may change the system settings. |
| Active debug code vulnerability exists in Mesh Wi-Fi router RP562B firmware version v1.0.2 and earlier. If this vulnerability is exploited, a network-adjacent authenticated attacker may obtain or alter the settings of the device . |
| Atheros Coex Service Application 8.0.0.255 contains an unquoted service path vulnerability in its Windows service configuration. Attackers can exploit the unquoted path by placing malicious executables in the service path to gain elevated system privileges during service startup. |
| Incorrect default permissions in some Intel(R) Distribution for Python software before version 2024.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Motorola Device Manager 2.4.5 contains an unquoted service path vulnerability in the PST Service that allows local users to potentially execute arbitrary code. Attackers can exploit the unquoted path in ForwardDaemon.exe to inject malicious code that will execute with elevated system privileges during service startup. |
