| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Altai Technologies Ltd Altai IX500 Indoor 22 802.11ac Wave 2 AP After login, there are file reads in the background, and attackers can obtain sensitive information such as user credentials, system configuration, and database connection strings, which can lead to data breaches and identity theft. |
| Directory Traversal vulnerability in yeqifu carRental v.1.0 allows a remote attacker to obtain sensitive information via the file/downloadFile.action?path= component. |
| A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges. |
| An issue in UltiMaker Cura v.4.41 and 5.8.1 and before allows a local attacker to execute arbitrary code via Inter-process communication (IPC) mechanism between Cura application and CuraEngine processes, localhost network stack, printing settings and G-code processing and transmission components, Ultimaker 3D Printers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gvt: fix gvt debugfs destroy
When gvt debug fs is destroyed, need to have a sane check if drm
minor's debugfs root is still available or not, otherwise in case like
device remove through unbinding, drm minor's debugfs directory has
already been removed, then intel_gvt_debugfs_clean() would act upon
dangling pointer like below oops.
i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2
i915 0000:00:02.0: MDEV: Registered
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ #15
Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020
RIP: 0010:down_write+0x1f/0x90
Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01
RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000
RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8
RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0
FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0
Call Trace:
<TASK>
simple_recursive_removal+0x9f/0x2a0
? start_creating.part.0+0x120/0x120
? _raw_spin_lock+0x13/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_clean+0x15/0x30 [kvmgt]
intel_gvt_clean_device+0x49/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2f/0xb0
i915_driver_remove+0xa4/0xf0
i915_pci_remove+0x1a/0x30
pci_device_remove+0x33/0xa0
device_release_driver_internal+0x1b2/0x230
unbind_store+0xe0/0x110
kernfs_fop_write_iter+0x11b/0x1f0
vfs_write+0x203/0x3d0
ksys_write+0x63/0xe0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6947cb5190
Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190
RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001
RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001
R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0
</TASK>
Modules linked in: kvmgt
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]--- |
| A Prototype Pollution issue in API Dev Tools json-schema-ref-parser v.11.0.0 and v.11.1.0 allows a remote attacker to execute arbitrary code via the bundle()`, `parse()`, `resolve()`, `dereference() functions. |
| An issue in briscKernelDriver.sys in BlueRiSC WindowsSCOPE Cyber Forensics before 3.3 allows a local attacker to execute arbitrary code within the driver and create a local denial-of-service condition due to an improper DACL being applied to the device the driver creates. |
| Directory Traversal vulnerability in lsgwr spring boot online exam v.0.9 allows an attacker to execute arbitrary code via the FileTransUtil.java component. |
| cskefu v7 suffers from Insufficient Session Expiration, which allows attackers to exploit the old session for malicious activity. |
| The Creative Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's widgets in all versions up to, and including, 1.5.12 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq27xxx: Fix poll_interval handling and races on remove
Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.
There are 2 problems with this:
1. If the driver is unbound through sysfs, rather then the module being
rmmod-ed, this changes poll_interval unexpectedly
2. This is racy, after it being set poll_interval could be changed
before bq27xxx_battery_update() checks it through
/sys/module/bq27xxx_battery/parameters/poll_interval
Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.
There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.
Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item. |
| WRC-X3200GST3-B v1.25 and earlier, and WRC-G01-W v1.24 and earlier allow a network-adjacent unauthenticated attacker to obtain the configuration file containing sensitive information by sending a specially crafted request. |
| A local privilege escalation (LPE) vulnerability has been identified in Phish Alert Button for Outlook (PAB), specifically within its configuration management functionalities. This vulnerability allows a regular user to modify the application's configuration file to redirect update checks to an arbitrary server, which can then be exploited in conjunction with CVE-2024-29209 to execute arbitrary code with elevated privileges.
The issue stems from improper permission settings on the application's configuration file, which is stored in a common directory accessible to all users. This file includes critical parameters, such as the update server URL. By default, the application does not enforce adequate access controls on this file, allowing non-privileged users to modify it without administrative consent.
An attacker with regular user access can alter the update server URL specified in the configuration file to point to a malicious server. When the application performs its next update check, it will contact the attacker-controlled server. If the system is also vulnerable to CVE-2024-29209, the attacker can deliver a malicious update package that, when executed, grants them elevated privileges.
Impact:
This vulnerability can lead to a regular user executing code with administrative privileges. This can result in unauthorized access to sensitive data, installation of additional malware, and a full takeover of the affected system.
Affected Products:
Phish Alert Button (PAB) for Outlook versions 1.10.0-1.10.11
Second Chance Client versions 2.0.0-2.0.9
PIQ Client versions 1.0.0-1.0.15
Remediation:
KnowBe4 has released a patch that corrects the permission settings on the configuration file to prevent unauthorized modifications. Automated updates will be pushed to address this issue. Users of affected versions should verify the latest version is applied and, if not, apply the latest updates provided by KnowBe4.
Workarounds:
Manually set the correct permissions on the configuration file to restrict write access to administrators only.
Credits:
This vulnerability was discovered by Ceri Coburn at Pen Test Partners, who reported it responsibly to the vendor.
|
| Rocket.Chat.Audit through 5ad78e8 depends on filecachetools, which does not exist in PyPI. |
| Cross Site Scripting vulnerability in CA17 TeamsACS v.1.0.1 allows a remote attacker to execute arbitrary code via a crafted script to the errmsg parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP
Fixes OOPS on boards with ANX9805 DP encoders. |
| GenX_FX is an advance IA trading platform that will focus on forex trading. A vulnerability was identified in the GenX FX backend where API keys and authentication tokens may be exposed if environment variables are misconfigured. Unauthorized users could gain access to cloud resources (Google Cloud, Firebase, GitHub, etc.). |
| qBit Manage is a tool that helps manage tedious tasks in qBittorrent and automate them. A path traversal vulnerability exists in qbit_manage's web API that allows authenticated users to read arbitrary files from the server filesystem through the restore_config_from_backup endpoint. The vulnerability allows attackers to bypass directory restrictions and read arbitrary files from the server filesystem by manipulating the backup_id parameter with path traversal sequences (e.g., ../). This vulnerability is fixed in 4.5.4. |
| In KDE Skanpage before 25.08.0, an attempt at file overwrite can result in the contents of the new file at the beginning followed by the partial contents of the old file at the end, because of use of QIODevice::ReadWrite instead of QODevice::WriteOnly. |
| Server information leak for the CDA Server process memory can occur when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning. |
