| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to conduct an XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have Admin privileges on an affected device. |
| IBM MQ Java and JMS client libraries could allow an authenticated attacker to execute arbitrary code on client applications due to a deserialization filter bypass in exception handling. |
| IBM MQ Appliance could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow in protocol message processing before authentication. |
| IBM Common Licensing Agent 9.0, Agent 9.0.0.1, Agent 9.0.0.2, ART 9.0, ART 9.0.0.1, and ART 9.0.0.2 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at
the end of the allocation instead, with an smp_store_release() that pairs
with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ
or NULL.
The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq
once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a
user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks
the VINTF0 array. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: ffs: fix mm lifetime handling
io_data stores a pointer to the submitting task's mm_struct,
but does not currently hold a reference to it while async
requests are pending.
This can result in a use-after-free if the task exits before
completion handling finishes.
Take a reference with mmgrab() when queuing the read request
and release it with mmdrop() on request completion. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io()
fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is
freed. However, for AIO operations, the kiocb cancel function was already
armed and kiocb->private was set to `p`.
If a concurrent cancel operation (such as sys_io_cancel()) executes after
ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free
can occur when the cancellation handler accesses the freed pointer.
To securely fix this race condition, we must properly un-arm the
cancellation. Invoking `kiocb->ki_complete()` does exactly this by
acquiring `ctx->ctx_lock` and safely removing the kiocb from the active
sequence. In doing so, it ensures that a parallel io_cancel can no longer
discover the kiocb, effectively closing the race window.
We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been
consumed and it should avoid attempting to complete the request again or
triggering subsequent completion handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: clean up device list on probe failure
sony_input_configured() adds some controllers to sony_device_list before
HID core registers their input devices. input_register_device() can fail
after the callback returns successfully. sony_probe() then observes that
HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware.
The devres-managed sony_sc is freed while its list node remains linked, so
the next matching controller traverses freed memory.
Initialize the list node and device ID to inactive states. Make list
removal idempotent and run the driver-private cleanup on every probe
failure path. This also makes a second cleanup safe when
sony_input_configured() already unwound a partial initialization before
sony_probe() handles the missing input claim.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against the HID input registration and probe unwind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
Writing to /proc/fs/nfsd/unlock_filesystem, or sending the
NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command,
walks the NFSv4 client hash tables to revoke open state and cancel
async COPY operations. All three handlers gate that walk on
nn->nfsd_serv, but a listener added via portlist or netlink
listener_set sets nn->nfsd_serv before any nfsd thread starts.
nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the
walkers dereference a NULL table. A local administrator with
CAP_SYS_ADMIN can crash the kernel this way without ever starting the
server.
nn->nfsd_serv is set when the service is created, which precedes
table allocation. NFSD_NET_UP instead brackets the window where the
tables are live: set at the end of nfsd_startup_net() and cleared in
nfsd_shutdown_net() after they are freed, both under nfsd_mutex.
Gating the three unlock paths on NFSD_NET_UP fixes the startup-time
NULL dereference while preserving the earlier post-shutdown
use-after-free fix. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during close_lru reaping
An nfs4_openowner left on nn->close_lru after its final CLOSE keeps
its last closed stateid in oo_last_closed_stid, holding only a raw
pointer to its nfs4_client. The laundromat reaps timed-out entries,
drops nn->client_lock, and calls nfs4_put_stid(), which dereferences
the client through cl_lock. Nothing pins the client across that
window, so a concurrent force_expire_client() can free it and
nfs4_put_stid() reads freed memory. __destroy_client() hits the same
race, walking clp->cl_openowners without cl_lock.
Pin the client with cl_rpc_users before dropping client_lock, and
skip clients already expiring. __destroy_client() then cleans up its
own close_lru entries through release_last_closed_stateid(), so
teardown no longer races the laundromat. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during blocked-lock reaping
A bare lock owner -- its only remaining reference a blocked lock on
nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but
no reference keeping the client alive. When the per-net laundromat
reaps such a lock, freeing the nbl drops the owner reference
held through flc_owner, and the final nfs4_put_stateowner()
takes the client's cl_lock. Because the laundromat detaches the
nbl first, __destroy_client() no longer finds it, so a concurrent
force_expire_client() can free the client before nfs4_put_stateowner()
runs, dereferencing cl_lock in freed memory.
Pin the client with cl_rpc_users before dropping
nn->blocked_locks_lock, and skip clients already expiring, whose
blocked locks __destroy_client() frees while holding an owner
reference. Take nn->client_lock outside nn->blocked_locks_lock.
Every other site holds nn->blocked_locks_lock as a leaf, acquiring
no further lock, so placing nn->client_lock outside it cannot form
a lock-order cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
