| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stale offload->prog pointer after constant blinding
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/wmi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Drop CLONE_THREAD requirement for private default hash alloc
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Replace old pointer to new idr
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666. |
| dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached. |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a heap use-after-free in the meta coder: when memory allocation fails, a single byte is written to a stale pointer. Remote attackers can trigger it by processing specially crafted image files, causing a denial of service. |
| A use-after-free vulnerability was found in FFmpeg's RASC video decoder. The decode_move() function initializes a read pointer into a decompressed buffer, but a subsequent reallocation of that same buffer during move-table processing leaves the pointer dangling. An attacker could exploit this by providing a specially crafted AVI file containing a malicious RASC video stream. When a user opens or plays the file, the decoder reads from freed heap memory, which could lead to a denial of service (crash). |
| libexpat before 2.8.2 does not consider XML_TOK_DATA_CHARS in doCdataSection and thus lacks handler call depth tracking for various calls from within handlers in cases of a policy violation. Thus, a use-after-free can occur. NOTE: this issue exists because of an incomplete fix for CVE-2026-50219. |
| Use After Free in libxml2's xmlParseInternalSubset from GNOME libxml2 version 2.9.11 to 2.11.0 allows a remote attacker to cause a denial-of-service via maliciously crafted XML input with improper entity resolution handling. |
| Cloudflare Quiche was affected by 2 use-after-free vulnerabilities in the connection ID iterator FFI functions.
The “quiche_connection_id_iter_next” and “quiche_conn_retired_scid_next” functions would return a pointer to a “ConnectionId” to the applications via function arguments, but the owned “ConnectionId” would be dropped at the end of those functions' scope.
Only applications using those FFI functions are affected. The FFI API is disabled by default by a build-time feature flag.
Impact
If unpatched, an application calling the affected FFI functions will dereference freed memory. The most likely outcome is undefined behavior leading to a process crash (denial of service). Depending on allocator state, the read may also return adjacent heap contents, resulting in limited information disclosure or incorrect connection identifier handling.
Mitigation
Users are requested to upgrade to quiche 0.29.2 which is the earliest version containing the fix for this issue. |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_ResumeParser from within handlers in cases of a policy violation. Thus, a use-after-free can occur (similar to the CVE-2026-50219 situation). |
