| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From version 4.0.0 to before version 4.0.5, the Sync Service's ConfigMap-backed provider (server/sync/sync_cm.go) performs zero authorization checks on all CRUD operations (create, read, update, delete). Any authenticated user — including those using fake Bearer tokens — can create, read, update, and delete Kubernetes ConfigMaps containing synchronization limits. This issue has been patched in version 4.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to version 1.18.0, four GET endpoints under /api/templates* in Arcane's Huma backend are registered without any Security requirement, allowing any unauthenticated network client to list and read the full Compose YAML and .env content of every custom template stored in the instance. Because Arcane's UI exposes a "Save as Template" flow on the project / swarm-stack creation pages that persists the operator's real env content (database passwords, API keys, etc.) verbatim, this missing authorization is an unauthenticated read of operator secrets in practice — not a theoretical info-disclosure. The frontend explicitly treats /customize/templates/* as an authenticated area (PROTECTED_PREFIXES in frontend/src/lib/utils/redirect.util.ts), and every CRUD operation (POST/PUT/DELETE) on the same paths requires a Bearer/API key, so this is a clear backend authorization gap, not intended public access. This issue has been patched in version 1.18.0. |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. |
| Cross site scripting in some Zoom Workplace Apps may allow an unauthenticated user to conduct a loss of integrity via adjacent network access. |
| Cross site scripting in some Zoom Workplace Apps may allow an unauthenticated user to conduct a loss of integrity via adjacent network access. |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Prior to 2.10.10 and 2.11.5, a vulnerability in datastore_search_sql allowed attackers to inject SQL in order to gain access to private resources and PostgreSQL system information This vulnerability is fixed in 2.10.10 and 2.11.5. |
| Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.25.0, the HTTP login endpoints (POST /login and POST /signalk/v1/auth/login) are protected by express-rate-limit (default: 100 attempts per 10-minute window, configurable via HTTP_RATE_LIMITS). The WebSocket login path — sending {login: {username, password}} messages over an established WebSocket connection — calls app.securityStrategy.login() directly without any rate limiting. An attacker can bypass HTTP rate limiting entirely by opening a WebSocket connection and attempting unlimited password guesses at the speed bcrypt allows (~20 attempts/sec with 10 salt rounds). This issue has been patched in version 2.25.0. |
| Wasmtime is a runtime for WebAssembly. From 30.0.0 to 36.0.8, 43.0.2, and 44.0.1, Wasmtime's allocation logic for a WebAssembly table contained checked arithmetic which panicked on overflow. This overflow is possible to trigger, and thus panic, when a table with an extremely large size is allocated. This is possible with the WebAssembly memory64 proposal where tables can have sizes in the 64-bit range as opposed to the previous 32-bit range which would not overflow. The panic happens when attempting to create a very large table, such as when instantiating a WebAssembly module or component. This vulnerability is fixed in 36.0.8, 43.0.2, and 44.0.1. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
syzbot reported a f2fs bug as below:
BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177
f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1
bio_endio+0x1006/0x1160 block/bio.c:1792
submit_bio_noacct+0x533/0x2960 block/blk-core.c:891
submit_bio+0x57a/0x620 block/blk-core.c:926
blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline]
f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557
f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775
read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481
__get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576
f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623
do_read_inode fs/f2fs/inode.c:425 [inline]
f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596
f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3763 [inline]
do_new_mount+0x885/0x1dd0 fs/namespace.c:3839
path_mount+0x7a2/0x20b0 fs/namespace.c:4159
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x704/0x7f0 fs/namespace.c:4338
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4338
x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is: in f2fs_finish_read_bio(), we may access uninit data
in folio if we failed to read the data from device into folio, let's add
a check condition to avoid such issue. |
| CubeCart is an ecommerce software solution. Prior to 6.7.0, an unauthenticated Reflected XSS vulnerability exists in the CubeCart v6.x search feature. Due to a logic flaw in classes/catalogue.class.php, user input is reflected without sanitization only when a search returns exactly one product. This flaw bypasses current filters, allowing an attacker to execute malicious JavaScript in the victim's browser, leading to session hijacking, site defacement, or phishing. This vulnerability is fixed in 6.7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Account property blob allocations to memcg
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits. |
| In the Linux kernel, the following vulnerability has been resolved:
kexec: derive purgatory entry from symbol
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan] |
| CubeCart is an ecommerce software solution. Prior to 6.7.0, an Authenticated Arbitrary File Upload vulnerability exists in the REST API File Manager endpoint (POST /api/v1/files) of CubeCart. The endpoint allows any holder of an API key with files:rw permission to upload PHP source files into the web-accessible images/source/ directory, where they are executed by the web server. Combined with a path-traversal flaw in the same endpoint's filepath parameter, a single API request writes a webshell anywhere the webserver process can write — including the document root — yielding full Remote Code Execution. This vulnerability is fixed in 6.7.0. |
| Flight is an extensible micro-framework for PHP. Prior to 3.18.1, the default error handler Engine::_error() writes the full exception message, exception code, and stack trace (including absolute filesystem paths) directly into the HTTP 500 response, with no debug gating. Production deployments leak internal paths, any secret interpolated into an exception message, and full module structure — giving attackers primitives for chaining other weaknesses (LFI, path traversal). This vulnerability is fixed in 3.18.1. |
| PyQuorum is a cryptographic library for secret sharing and key management. Prior to 0.2.1, the mul_mod function implements multiplication via a binary expansion loop whose execution time depends on the Hamming weight of the second operand (the exponent). An attacker who can measure the time of secret‑sharing operations (e.g., via a remote service) could progressively recover the values of shares, ultimately leading to secret reconstruction. This vulnerability is fixed in 0.2.1. |
| hoppscotch is an open source API development ecosystem. The fix for CVE-2026-28215 in version 2026.2.0 addresses the unauthenticated POST /v1/onboarding/config endpoint by checking onboardingCompleted and canReRunOnboarding before allowing config overwrites. However, GET /v1/onboarding/config still leaks all infrastructure secrets in plaintext to unauthenticated users when the ONBOARDING_RECOVERY_TOKEN stored in the database is an empty string. This vulnerability is fixed in 2026.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
Avoid division by zero when sampling frequency is unspecified. |
