Export limit exceeded: 378519 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378519 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-13267 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 8.1 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 could allow an authenticated user to gain privileges of another user via a specially crafted request. | ||||
| CVE-2026-12618 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 7.2 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 could allow an administrator to execute additional commands they are not entitled to due to improper validation of user supplied input. | ||||
| CVE-2026-12359 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 8.1 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 could allow a remote attacker to access sensitive information due to an inconsistent interpretation of an HTTP request by a reverse proxy. | ||||
| CVE-2026-46345 | 2026-08-17 | 8.4 High | ||
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the `-o/--output` argument in `trestle author jinja` allows writing files outside the intended workspace. The application does not properly validate, `../`, `..\`, or absolute paths. This allows arbitrary file write to attacker-controlled locations. Versions 3.12.3 and 4.0.3 patch the issue. | ||||
| CVE-2026-12005 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 7.2 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a input validation vulnerability in the management interface that allows already privileged attackers to execute additional operations by crafting a malicious HTTP request. | ||||
| CVE-2026-17111 | 1 Ibm | 1 I | 2026-08-17 | 7.6 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify, or delete information in the back-end database. | ||||
| CVE-2026-17417 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of shell metacharacters. | ||||
| CVE-2026-17642 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-18148 | 1 Ibm | 1 I | 2026-08-17 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to inject arbitrary content into Navigator log files due to improper output neutralization for logs. | ||||
| CVE-2026-18150 | 1 Ibm | 1 I | 2026-08-17 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to a race condition. | ||||
| CVE-2026-54284 | 2026-08-17 | N/A | ||
| sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, TokenList construction and string conversion in sqlparse/sql.py repeatedly flatten nested token subtrees constructed by group_parenthesis and group_case, causing quadratic CPU consumption through sqlparse.parse(), sqlparse.format(), and sqlparse.split() before depth and token limits terminate processing. This issue is fixed in version 0.6.0. | ||||
| CVE-2026-12004 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 8.7 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. | ||||
| CVE-2026-11937 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 3.1 Low |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 and IBM Security Verify Access Container 10.0 through 10.0.9.2 Reverse Proxy in certain configurations is vulnerable to a denial of service attack. | ||||
| CVE-2026-12629 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 4.6 Medium |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). | ||||
| CVE-2026-12630 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 4.3 Medium |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table. The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction. The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. | ||||
| CVE-2026-12519 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 5 Medium |
| The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len. When a %NOTIFYEV: line longer than 39 bytes contains no " within the linearized region, the loop indices p1/p2 walk past value[39] and read adjacent stack memory until a stray quote byte is found or the index reaches len. The over-read string is then passed to strncmp()/atoi()/LOG_*, and if a quote byte is found out of bounds the subsequent value[p2] = '\0' performs a single-NUL out-of-bounds stack write at an attacker-influenced offset. The %NOTIFYEV: payload carries network-derived content (LTIME network time, SIB1 base-station system information, CSPS/RRCSTATE), so a rogue cellular base station, a malicious or compromised modem module, or RF manipulation that induces an over-long notify line reaches the defect without any application interaction; the handler runs automatically on the unsolicited event in the modem RX thread. The impact is out-of-bounds stack disclosure (into logs and parsing) and stack corruption that can crash the modem RX thread (denial of service). The write offset is only weakly controlled, so memory-safe code execution is not demonstrated. The fix bounds both scanning loops by out_len, keeping all accesses within the linearized buffer. | ||||
| CVE-2026-16853 | 1 Ibm | 1 I | 2026-08-17 | 6.5 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-16878 | 1 Ibm | 1 I | 2026-08-17 | 5.4 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-68517 | 2026-08-17 | 6.5 Medium | ||
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, the cors_origins guard in glances/outputs/glances_restful_api.py uses exact list equality instead of wildcard membership, allowing a multi-origin list containing the wildcard to retain cors_credentials and expose authenticated REST API data to an untrusted website visited by a previously authenticated user. This issue is fixed in 4.5.6. | ||||
| CVE-2026-16674 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to an untrusted search path. | ||||