Export limit exceeded: 351761 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (351761 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31420 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mrp: reject zero test interval to avoid OOM panic br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes. | ||||
| CVE-2026-31421 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) | ||||
| CVE-2026-31422 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] ======================================================================= | ||||
| CVE-2026-31423 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved. | ||||
| CVE-2026-43454 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook. | ||||
| CVE-2026-43455 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call. | ||||
| CVE-2026-43456 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1 | ||||
| CVE-2026-31424 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations. | ||||
| CVE-2026-43490 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate inherited ACE SID length smb_inherit_dacl() walks the parent directory DACL loaded from the security descriptor xattr. It verifies that each ACE contains the fixed SID header before using it, but does not verify that the variable-length SID described by sid.num_subauth is fully contained in the ACE. A malformed inheritable ACE can advertise more subauthorities than are present in the ACE. compare_sids() may then read past the ACE. smb_set_ace() also clamps the copied destination SID, but used the unchecked source SID count to compute the inherited ACE size. That could advance the temporary inherited ACE buffer pointer and nt_size accounting past the allocated buffer. Fix this by validating the parent ACE SID count and SID length before using the SID during inheritance. Compute the inherited ACE size from the copied SID so the size matches the bounded destination SID. Reject the inherited DACL if size accumulation would overflow smb_acl.size or the security descriptor allocation size. | ||||
| CVE-2026-44923 | 2026-05-20 | N/A | ||
| SQL injection in InfoScale VIOM before v9.1.3 allows remote attackers to escalate privileges. | ||||
| CVE-2026-44926 | 2026-05-20 | N/A | ||
| InfoScale CmdServer before 7.4.2 mishandles access control. | ||||
| CVE-2026-44925 | 1 Veritas | 1 Infoscale Operations Manager | 2026-05-20 | N/A |
| Cross-Site Request Forgery (CSRF) vulnerability in InfoScale v.9.1.3 Operations Manager (VIOM) allows an attacker to force the user with an active session into clicking a malicious HTML link, which triggers unintended modifications on VIOM web application without the user's knowledge. | ||||
| CVE-2026-8961 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 6.5 Medium |
| Spoofing issue in the Form Autofill component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. | ||||
| CVE-2026-8967 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 7.5 High |
| Information disclosure in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 151 and Thunderbird 151. | ||||
| CVE-2026-8962 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 8.1 High |
| Mitigation bypass in the DOM: Security component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. | ||||
| CVE-2026-31425 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker. | ||||
| CVE-2026-31426 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC | ||||
| CVE-2026-8965 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 7.5 High |
| Information disclosure in the DOM: Security component. This vulnerability was fixed in Firefox 151 and Thunderbird 151. | ||||
| CVE-2026-8966 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 7.5 High |
| Information disclosure in the IP Protection component. This vulnerability was fixed in Firefox 151 and Thunderbird 151. | ||||
| CVE-2026-8973 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 8.8 High |
| Memory safety bugs present in Thunderbird 150. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 151 and Thunderbird 151. | ||||