Export limit exceeded: 373870 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373870 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68093 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Eventually vCPU-B from a different VM is assigned asid_generation=2, ASID=N — the same ASID that vCPU-A held before the hotplug. 3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B. Both vCPUs from different VMs now run on CPU-X with the same ASID, causing them to share NPT TLB entries and producing stale translations. The collision manifests as a KVM internal error (Suberror: 1, emulation failure). The NPT page fault reports a faulting GPA far outside the VM's physical memory range — a sign of stale TLB translations being used. KVM falls back to instruction emulation, which fails on FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not implement. Fix this by incrementing asid_generation instead of resetting it to 1 in svm_enable_virtualization_cpu(). On module load, asid_generation starts at 0 (memset) and the increment produces 1, identical to the old behaviour. On subsequent hotplug cycles the generation advances beyond any value a vCPU previously observed on this CPU, so the generation check in pre_svm_run() reliably forces new_asid() on every vCPU after every hotplug cycle. | ||||
| CVE-2026-68094 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Preserve rq tracking across local DSQ dispatch dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while ops.dispatch() has recorded the current rq. Moving a task to a local DSQ may switch to the source or destination rq before synchronously invoking ops.dequeue() through the following path: SCX_CALL_OP(dispatch, rq) ops.dispatch() scx_bpf_dsq_move_to_local() scx_flush_dispatch_buf() finish_dispatch() dispatch_to_local_dsq() scx_dispatch_enqueue() local_dsq_post_enq() call_task_dequeue() SCX_CALL_OP_TASK(dequeue, locked_rq, ...) The nested callback saves the recorded rq and restores it on return. If the rq tracking does not follow the lock switch, update_locked_rq() can trigger the following lockdep assertion while restoring an rq which is no longer held: WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170 Call Trace: scx_dispatch_enqueue+0x2b0/0x460 dispatch_to_local_dsq+0x138/0x230 scx_flush_dispatch_buf+0x1af/0x220 scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0 bpf__sched_ext_ops_dispatch+0x4b/0xa7 do_pick_task_scx+0x3b6/0x910 __pick_next_task+0x105/0x1f0 __schedule+0x3e7/0x1980 Introduce switch_rq_lock() to update the tracking state together with each rq lock handoff. Use it in dispatch_to_local_dsq(), move_remote_task_to_local_dsq() and the in-balance paths of scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the rq whose lock is actually held throughout the lock dance. | ||||
| CVE-2026-68097 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but does not verify that the declared ACE size contains all sub-authorities described by that field. An undersized ACE can therefore be copied and later make the POSIX ACL deduplication walk inspect data beyond the copied ACE boundary. The existing initial bound check is also too small. It only ensures that the ACE size field is accessible before set_ntacl_dacl() reads sid.num_subauth farther into the input buffer. Require enough input for the fixed SID header before accessing num_subauth, reject ACEs smaller than that header, and skip ACEs whose declared size cannot contain the complete SID. This makes the validation consistent with the other ACE walk paths. | ||||
| CVE-2026-68098 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACEs to bound the dedup walk, and preserve the original "input DACL had NT ACEs" state separately for the Everyone/default ACL fallback. This keeps the dedup walk aligned with the ACEs that are actually present in the rebuilt DACL. | ||||
| CVE-2026-68100 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES) set_ntacl_dacl() is the lone inconsistent path that omits the check. Add the same num_subauth validation in set_ntacl_dacl() before copying the ACE, matching the gate already enforced by parse_dacl(). | ||||
| CVE-2026-19429 | 1 Jenkins Project | 1 Jenkins | 2026-08-10 | 6.5 Medium |
| Jenkins FilePath.untarFrom() (all versions) validates symlink destinations but not targets, bypassing the CVE-2026-33001 fix. An admin points a tool installer (DownloadFromUrlInstaller/ZipExtractionInstaller) at an attacker URL; any user's POST /job/{name}/build then extracts the malicious tar, planting symlinks in the tool cache. Sensitive files are read via GET /job/{name}/lastBuild/consoleText or GET /job/{name}/ws/{file}, exposing /etc/passwd, secrets/master.key, and credentials.xml. | ||||
| CVE-2026-72593 | 1 Dulldusk | 1 Phpfm | 2026-08-10 | 9.8 Critical |
| A missing authentication vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to access the full file manager functionality including reading, writing, deleting, and uploading files anywhere on the server filesystem. | ||||
| CVE-2026-72576 | 1 Bludit | 1 Bludit | 2026-08-10 | 5.4 Medium |
| A stored cross-site scripting (XSS) vulnerability in Bludit 4.0.0-beta allows a low-privileged authenticated user (Author role) to inject arbitrary JavaScript by uploading a crafted SVG file as the site logo. A stored script tag in the SVG executes in the browser of any user who loads the logo. | ||||
| CVE-2026-72569 | 2026-08-10 | 9.1 Critical | ||
| A path traversal vulnerability in cube-root/directory-serve through 1.3.7 allows an unauthenticated remote attacker to delete arbitrary files outside the intended served directory when the application is run with the --delete option. | ||||
| CVE-2026-72567 | 2026-08-10 | 9.8 Critical | ||
| An improper path validation vulnerability in AsyncFuncAI/deepwiki-open through commit 16f35a0 allows unauthenticated remote attackers to write to or delete arbitrary files with root privileges. The api/api.py wiki-cache endpoint constructs file paths from user-controlled owner, repo, and repo_type fields without sanitization, enabling path traversal. | ||||
| CVE-2026-72578 | 2026-08-10 | 8.8 High | ||
| A cross-site request forgery (CSRF) vulnerability in FreePBX Framework 17.0 allows an unauthenticated remote attacker to perform administrative actions on behalf of an authenticated administrator. | ||||
| CVE-2026-72566 | 2026-08-10 | 7.7 High | ||
| A server-side request forgery (SSRF) vulnerability in automatisch through commit 41f3c56 allows a low-privileged authenticated user with 'manage Flow' permission to make the server fetch arbitrary URLs and retrieve the full response body via the HTTP Request app's Custom Request action. | ||||
| CVE-2026-72565 | 2026-08-10 | 9.8 Critical | ||
| A SQL injection vulnerability in Tencent APIJSON through 8.1.8 allows unauthenticated remote attackers to bypass per-table access control and read arbitrary database tables via the Map-form @having operator. | ||||
| CVE-2026-15060 | 2026-08-10 | 4.7 Medium | ||
| When systemd-machined >= v259 (or v258 with a custom `polkit` policy that allows `register-machine` access) is running on a desktop system, an unprivileged user logged in a desktop graphical session can kill arbitrary processes, even privileged ones. - versions older than v259 are not affected, unless unprivileged access is granted for the `register-machine` polkit action via a local, custom policy config file - versions older than v258 are not affected - unrelated to the systemd service manager (pid 1 or user session managers) - systemd-machined is not typically installed by default, and is typically in an optional, separate package (e.g.: systemd-container) - terminal-only or remote sessions (e.g.: ssh) are not affected | ||||
| CVE-2026-16742 | 2026-08-10 | 6.7 Medium | ||
| systemd-homed contains a local privilege escalation bug via arbitrary system group addition to a local, logged in, homed-managed user | ||||
| CVE-2026-15059 | 2026-08-10 | 5.5 Medium | ||
| Local unprivileged users can terminate arbitrary local processes via a systemd-oomd IPC API due to a missing path traversal validation. | ||||
| CVE-2026-64941 | 1 Phoenixframework | 1 Phoenix Live View | 2026-08-10 | N/A |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in phoenixframework phoenix_live_view allows an attacker to send a victim's browser to an origin of the attacker's choosing via a :to value containing ASCII tab, LF or CR. redirect/2 validates :to through the private validate_local_url!/2 in lib/phoenix_live_view.ex, which is intended to guarantee the target is a path within the application. It rejects a leading // and any backslash, but not ASCII tab, LF or CR. Browsers strip those three characters before parsing a URL, so a value such as /<TAB>/example.com passes validation as a path and is then resolved as the scheme-relative URL //example.com. The live navigation functions share the guard but are not affected, because the client expands their target against the current origin. push_patch/2 is also affected before 0.7.0, which is when that expansion was added. This issue affects phoenix_live_view: from 0.5.0 before 1.0.19, from 1.1.0-rc.0 before 1.1.33, and from 1.2.0-rc.0 before 1.2.9. | ||||
| CVE-2026-18478 | 2026-08-10 | N/A | ||
| Magnolia CMS is vulnerable to Stored XSS in import functionality. An attacker with editor privileges can inject arbitrary HTML and JS into the name of uploaded image, which will be rendered/executed when opening uploaded image. The issue was fixed in version 6.3.10 | ||||
| CVE-2026-59090 | 1 Redhat | 1 Enterprise Linux | 2026-08-10 | 8.4 High |
| A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system. | ||||
| CVE-2026-18370 | 2026-08-10 | N/A | ||
| entr is vulnerable to Heap-based buffer overflow in run_utility() function. The function allocates a fixed-size heap buffer using malloc(ARG_MAX) and copies command-line arguments into it. It advances the destination pointer based on the return value of strlcpy(), which returns the total length of the source string rather than the number of bytes written. When the buffer is exactly filled, the remaining size underflows as an unsigned size_t, causing subsequent copies to write out of bounds. This can be triggered by supplying command-line arguments whose combined length fills the buffer, or via the /_ substitution feature which expands a short token into a longer pathname at runtime. The local attacker can cause memory corruption, process abort, and denial of service. This issue was fixed in commit 2467fe0 | ||||