Export limit exceeded: 395624 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395624 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90278 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap before calling mddev_detach(). That made mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap was already disconnected from mddev. This was still safe for the legacy bitmap because bitmap_destroy() waits for behind writes itself. llbitmap keeps that wait in its ->wait_behind_writes() operation instead, while ->destroy() tears down the llbitmap storage. With the old ordering, RAID1 behind-write completions could still run after llbitmap storage had been freed. Call mddev_detach() before md_bitmap_destroy() so the common detach path can wait for behind writes while the bitmap is still alive. Only destroy the bitmap after those users are gone. | ||||
| CVE-2026-90280 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on the possibly uninitialized phy pointer. | ||||
| CVE-2026-90282 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on the possibly uninitialized phy pointer. | ||||
| CVE-2026-90356 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu while dev->wcid[] still holds pointers to the wcid embedded in each freed link; mt76_reset_device() then dereferences those entries and runs mt76_wcid_cleanup() on them. If a grace period elapses in between, the cleanup operates on freed memory. Run mt76_reset_device() first, so the wcid entries are cleaned up and cleared while the links are still valid. | ||||
| CVE-2026-90357 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement The flow is added to dev->twt_list before sending the agreement to the firmware, but the error path leaves it linked while flowid_mask is never set. The flow slot can then be reused and memset while still on the list, corrupting twt_list, and station removal leaves a dangling entry behind that mt7915_mac_twt_sched_list_add() later walks. | ||||
| CVE-2026-90358 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix trampoline stack size for 128-bit arguments btf_distill_func_proto() accepts a function argument up to 16 bytes, so a 128-bit scalar such as __int128 reaches the x86 trampoline with arg_size == 16. But the current implementation assumes an __int128 argument only needs one register, so the register save area is under-allocated and save_args() overwrites adjacent stack slots. Compute the register count from arg_size for all arguments to fix it. | ||||
| CVE-2026-85878 | 1 Microsoft | 1 Azure Horizondb | 2026-09-19 | 9.9 Critical |
| Improper authorization in Azure Database for PostgreSQL allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-69843 | 1 Microsoft | 2 Fabric, Microsoft Fabric | 2026-09-19 | 10 Critical |
| Authentication bypass by spoofing in Microsoft Fabric allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-62874 | 1 Microsoft | 1 Azure Billing | 2026-09-19 | 10 Critical |
| Insufficient verification of data authenticity in Azure Billing allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-15815 | 1 Grafana | 2 Grafana, Grafana Enterprise | 2026-09-19 | 8.8 High |
| Grafana OSS and Grafana Enterprise did not safely resolve symbolic links when extracting plugin archives. A crafted plugin archive can chain relative symbolic link entries to escape the plugin installation directory, writing arbitrary files and an executable backend binary outside that directory. The dropped executable runs with the privileges of the Grafana server process, resulting in remote code execution. Plugin archives are extracted before their signature is verified, so a valid plugin signature does not prevent the write. An operator can therefore be affected by installing a plugin that appears legitimate, as well as by installing a plugin from an arbitrary archive using grafana-cli, the GF_INSTALL_PLUGINS environment variable, or preinstall configuration. Grafana Enterprise is affected because it includes the same plugin extraction code as Grafana OSS. | ||||
| CVE-2026-90285 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call. | ||||
| CVE-2026-90288 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure for_each_child_of_node_scoped() releases the node reference on scope exit, so the explicit of_node_put(np) in the devm_phy_create() error path drops it twice. Drop the redundant of_node_put() and let the scoped cleanup handle it. | ||||
| CVE-2026-90296 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix devres accumulation across driver rebind imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev is the CPU device from get_cpu_device(0). That device is never unbound, so its devres list is never released, and imx6q_cpufreq_remove() does not free the array either. Every probe therefore adds an allocation that stays for the lifetime of the system. Allocate against the platform device instead. Its devres is released when the driver is unbound, which is exactly the lifetime the array wants: imx6q_set_target() reads it, and nothing may reach that after cpufreq_unregister_driver(). That makes the array actually go away on unbind, so also clear the file-scope pointer in remove and on the failed-probe path, rather than leave it pointing at memory devres is about to release. Tested by rebinding the driver on qemu's mcimx6ul-evk. | ||||
| CVE-2026-90304 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9484/1: enable interrupts when unhandled user faults are triggered PREEMPT_RT requires interrupts to be enabled when sending signals. When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults, that is `inf->fn()` return a non-zero value, and the interrupts are not enabled within the hook function, force_sig_fault() will be called with interrupts disabled. This can be triggered by user programs executing the bkpt instruction, with kernel config CONFIG_PERF_EVENTS=n. Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled user faults are triggered to fix the issue. | ||||
| CVE-2026-90219 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Free debugfs on registration failure c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via setup_debugfs()), but it is removed only in c4iw_remove(), not in c4iw_dealloc(). When RDMA device registration fails, the registration worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing c4iw_remove(), so the debugfs dentries leak and outlive the freed c4iw_dev. Move debugfs_remove_recursive() into c4iw_dealloc() so every path that frees ctx->dev also removes its debugfs tree. | ||||
| CVE-2026-90236 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Release the export reference when reaping open stateids nfs4_put_stid() releases the svc_export tracked in nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and lock stateids by calling ->sc_free() directly, bypassing that path. An open stateid takes an sc_export reference in nfs4_open() and a lock stateid takes its own in init_lock_stateid(); both reach free_ol_stateid_reaplist() through their normal teardown, the open stateid via release_open_stateid() and the lock stateid via nfsd4_release_lockowner(), each through put_ol_stateid_locked(). The reference is therefore never dropped, pinning the export and blocking unmount for the lifetime of the stateid. Release sc_export in free_ol_stateid_reaplist() the way nfs4_put_stid() does. ->sc_free() runs once per stateid, and a stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but never both, so the reference is dropped exactly once. Revoked stateids reach this path with sc_export already cleared by drop_stid_export(), so they are skipped rather than double-freed. nfs4_put_stid() itself read sc_export before acquiring cl_lock. drop_stid_export() clears that field and releases the reference under cl_lock, so a concurrent revocation could drop the export in the window between the read and the final put, releasing the same reference twice. Read sc_export while cl_lock is held so the two paths serialize and the reference is released exactly once. | ||||
| CVE-2026-90239 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence. If one of them fails, it jumps to error_no_memory and returns -ENOMEM without releasing the pools that were already allocated, leaking them. Release the already-allocated pools before returning. isp4if_gpu_mem_free() is a no-op on pools that were not allocated, so calling isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that succeeded. isp4if_gpu_mem_free() previously logged an error for a NULL entry, which is a normal case during partial-allocation cleanup, so make it silent. | ||||
| CVE-2026-90311 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thermal: hwmon: Remove hwmon class device along with its parent The current code creates one hwmon device per thermal zone type and that device is registered under the first thermal zone of the given type. That turns out to be problematic when the thermal zone holding the hwmon device is removed. For example, say that there are two ACPI thermal zones on a system /sys/devices/virtual/thermal/thermal_zone0/ /sys/devices/virtual/thermal/thermal_zone1/ The current code registers a hwmon class device for thermal_zone0 only: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/ because the type is "acpitz" for both of them, but it adds a sysfs attribute that belongs to thermal_zone1 under it: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input There is also /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input which belongs to thermal_zone0. When thermal_zone0 is removed, say because the ACPI thermal driver is unbound from the underlying platform device, thermal_remove_hwmon_sysfs() skips the removal of hwmon0 because of the temp2_input attribute belonging to thermal_zone1 which effectively prevents thermal_zone0 removal from making progress. Address this by making thermal_remove_hwmon_sysfs() remove the entire hwmon class device interface for the given thermal zone type when the thermal zone device holding it is removed. To prevent races with thermal_add_hwmon_sysfs() that may interfere with this, carry out the entire addition and removal of hwmon sysfs interfaces for thermal zones under thermal_hwmon_list_lock. Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to the current kernel coding style to align with the new "unlock" label. | ||||
| CVE-2026-90246 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is false, so the guard is bypassed and the inner loop reads sets.table[2] -- one element past a two element allocation The walk continues until an out-of-bounds value happens to be >= hdrs.size or the access faults, so a crafted policy yields an out-of-bounds read on the policy load path (aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags -> verify_tags). unpack_tags() runs before the perms and DFA tables are unpacked, so no other table needs to be well formed to reach it. Policy load is gated by aa_may_manage_policy(), which checks CAP_MAC_ADMIN relative to the subject's own user namespace rather than the init user namespace, so with the default unprivileged_userns_apparmor_policy=1 the path is reachable from an unprivileged task in a matched-level nested namespace, not only by a globally privileged one. Perform the addition in u64 so that it cannot wrap, restoring the intended i + cnt < sets.size guarantee. | ||||
| CVE-2026-90250 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix storage null-ptr-deref after replacing prog Syzkaller reported a storage null-ptr-deref issue after replacing prog. This occurs in the following scenario: 1. prog A, an empty prog, is attached to a cgrp. 2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the bpf_get_local_storage helper. 3. link_update is called to replace prog A with prog B. The reason is that __cgroup_bpf_replace fails to alloc and assign the required cgrp storage for the incoming replacement prog. Consequently, the new prog inherits an uninit storage, leading to null-ptr-deref panic when kick the new prog. Fix this by rejecting a link update if new_prog's cgroup storage is incompatible with link->prog. | ||||