Export limit exceeded: 398219 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398219 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-78397 | 1 Wordpress-extensions | 1 Link Library | 2026-09-26 | 4.0 Medium |
| The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered. Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled. | ||||
| CVE-2026-97524 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it. | ||||
| CVE-2026-97526 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for CPU add and delete and create the necessary per-CPU data infrastructure during CPU hotplug add processing. Same for CPU hotplug remove. This is done when the CPU is offline to ensure the data structures are available when CPU is made online and tasks are scheduled on it. [hca@linux.ibm.com: fixup error path in pai_init()] | ||||
| CVE-2026-97533 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF A previous commit protected against races between ptdump and CPA collapse, however one still exists between attribute changes and collapse as reported by Denis V. Lunev (linked). When an attribute change arises, a lockless page table walker obtains a PTE entry, which is later written to via set_pte_atomic(): ... -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> _lookup_address_cpa() -> lookup_address_in_pgd_attr() -> [ lockless page table walker ] -> set_pte_atomic() There is nothing preventing a concurrent CPA collapse which can free the PTE that was retrieved here, resulting in a use-after-free. With the mmap write lock taken on init_mm over CPA collapse, resolve this race by acquiring an mmap read lock on init_mm over __change_page_attr_set_clr(). This locks across the whole operation over which the walk and the PTE entry write occurs, solving the race. It is safe to do this here, as no spinlocks are held upon entry to __change_page_attr_set_clr(). However, the lock must not be held over an allocation, as allocation can trigger reclaim and shrinkers may call into CPA recursively, making deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm). A page table is allocated when a huge page needs to be split: -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> split_large_page() [ pagetable_alloc() ] -> __split_large_page() Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in split_large_page() and track whether this is needed by adding a new 'init_mm_read_locked' flag to struct cpa_data. This is safe as __split_large_page() (called with locks re-established) revalidates that the page table entry is the same as it was prior to the locks being dropped and __change_page_attr() repeats the entire page table walk whenever a split occurs, so concurrent split and collapse are accounted for. Concurrent ptdump is also safe as the lock is only dropped over page table allocation during which time the page table has not yet been modified. The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively operates upon vmalloc ranges, and on x86 only within the module mapping space. This is important, because some callers directly invoke __change_page_attr_set_clr(), bypassing this lock. However, none of these operate within the module mapping space. * cpa_process_alias() - a recursive helper called by __change_page_attr_set_clr(). * __set_memory_enc_pgtable() - operates on the direct mapping and (via __vmbus_establish_gpadl()) the vmalloc mapping space. * __set_pages_[n]p() - called by set_direct_map_[invalid, default, valid]_noflush(), __kernel_map_pages() - operates on the direct map. * kernel_[un]map_pages_in_pgd() - operates on EFI ranges. This work is based upon Denis V. Lunev's excellent analysis of the bug with gratitude. [ dhansen: move to imperative voice in changelog ] | ||||
| CVE-2026-97548 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions The _maxlevels_ondisk functions are used to compute the size of in-memory btree cursors for each btree type. Unfortunately, LOLLM noticed that the rtrmap and rtrefcount versions of these functions forget to account for the inode root, which means that we could access beyond the end of the cursor given a sufficiently large btree. Fix this. | ||||
| CVE-2026-97549 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix under-reservation of blocks when repairing sf directories Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n size=8192", I observed the following (trimmed) dmesg splat: XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387 WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511 CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8 Tainted: [W]=WARN RIP: 0010:assfail+0x46/0x4a [xfs] RSP: 0018:ffffc900010d7890 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1 RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940 R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0 FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0 Call Trace: <TASK> xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x7a/0x3b0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 This is a consequence of commit 0fe77e57588b98, which added the following assertion to xfs_da_grow_inode_int: ASSERT(args->total >= dp->i_nblocks - nblks); Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args object that's passed to xfs_dir2_sf_to_block sets args->total to 1. This is incorrect because mkfs set the directory block size to 8k and the filesystem block size to 4k. In other words, args->total should be 2 here, not 1. Dave Chinner tripped over the same problem with the same branch through a different channel -- his test setup set the fs block size to 1k, in which case the directory block size is still set to 4k. Here, args->total should be 4. Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount makes the assertion go away, but that isn't a complete fix. In xrep_tempexch_estimate, we also incorrectly assume that a shortform conversion requires 1 fsblock when it should be m_dir_geo->fsbcount. Without that, we can under-reserve space in the transaction and cause a filesystem shutdown. Note that the xfs_dabuf_nfsb helper will compute the correct value for directories and xattr, so we use that instead of open-coding the logic. Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb to avoid one logic bomb if we ever support multi-fsblock attrs. Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") | ||||
| CVE-2026-97562 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 The same test passes with this change applied. Take the active reference in the callback while iterate_supers_type() still holds s_umount shared. cifs_put_tcp_super() remains the matching release. | ||||
| CVE-2026-98030 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. | ||||
| CVE-2026-95657 | 1 Dgtlmoon | 1 Changedetection.io | 2026-09-26 | 3.5 Low |
| A vulnerability was determined in dgtlmoon Changedetection.io up to 0.55.8. This issue affects the function setCurrentSelectedText of the file changedetectionio/static/js/visual-selector.js of the component Visual Selector. Executing a manipulation of the argument s can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.60.1 is capable of addressing this issue. This patch is called aac6fcfa594f17511b8ff73e5eaa4f6c33899de0. It is suggested to upgrade the affected component. | ||||
| CVE-2026-95653 | 2 Concretecms-community-store, Nbubna | 2 Community Store, Store | 2026-09-26 | 7.5 High |
| Concrete CMS Community Store before 2.7.8 derives digital product download tokens from order creation timestamps instead of random values, making tokens predictable. Unauthenticated attackers can enumerate sequential order and file identifiers to calculate valid download tokens and retrieve digital goods purchased by other customers. | ||||
| CVE-2026-95396 | 1 Sfturing | 1 Hosp Order | 2026-09-26 | 4.3 Medium |
| A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. Affected is an unknown function of the file HospitalController.java of the component Public Search Handlers. The manipulation of the argument Search leads to cross site scripting. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-94640 | 1 Redhat | 3 Enterprise Linux, Openshift, Openshift Container Platform | 2026-09-26 | 7.5 High |
| A flaw was found in rpcbind. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a large number of unique requests. The rpcbind service records previously unseen RPC (Remote Procedure Call) statistics in unbounded in-memory lists, leading to persistent memory growth and increased CPU usage. This can degrade or exhaust service availability. | ||||
| CVE-2026-93343 | 2 Webwizards, Wordpress | 2 Marketking, Wordpress | 2026-09-26 | 6.5 Medium |
| MarketKing plugin for WordPress before 2.1.72 contains a missing authorization vulnerability in the marketking_admin_vendors_ajax AJAX action that allows authenticated attackers with subscriber-level access or higher to retrieve the complete vendor directory by sending a crafted AJAX request. Attackers can exploit the absence of capability checks in the vendor management action to retrieve internal user IDs, usernames, and email addresses of all registered vendors, exposing personally identifiable information to any logged-in user regardless of role. | ||||
| CVE-2026-88418 | 1 Cmsimple | 1 Cmsimple | 2026-09-26 | 8.8 High |
| CMSimple 5.24 ships with CSRF protection disabled by default, which turns csrfProtection() into a no-op on every state-changing admin request, and it does not send the csrf_token hidden field in admin forms. Because administrator authentication is cookie-only and no CSRF token is enforced, an unauthenticated attacker can induce a logged-in administrator's browser to issue a forged content-save request with a text payload containing a scripting marker. The marker is stored verbatim into content/content.php; on every subsequent page view evaluate_cmsimple_scripting() (functions.php) executes the marker body with PHP eval() — for all visitors, including unauthenticated ones. This yields persistent remote code execution on the web server. | ||||
| CVE-2026-88414 | 1 Mcms | 1 Mcms | 2026-09-26 | 9.8 Critical |
| MCMS 6.1.1 through 6.2.1 contains a SQL injection vulnerability in the PageAction.verify endpoint (GET /ms/mdiy/page/verify.do). | ||||
| CVE-2026-85725 | 1 Hkuds | 1 Lightrag | 2026-09-26 | 5.9 Medium |
| LightRAG provides simple and fast retrieval-augmented generation. Prior to 1.5.5, verify_password in lightrag/api/passwords.py compares plaintext AUTH_ACCOUNTS password values with Python's == operator. The comparison can return after the first mismatching byte, creating response-time differences based on password length and matching prefixes. A network attacker with sufficiently low-latency access can repeatedly query the /login endpoint and use the timing oracle to recover a plaintext-configured password character by character. Deployments using bcrypt-prefixed password values are not affected by this comparison path. This issue is fixed in version 1.5.5. | ||||
| CVE-2026-85288 | 1 Notepad-plus-plus | 1 Notepad++ | 2026-09-26 | 6.7 Medium |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.8, Notepad++ incompletely enforces shortcuts.xml HMAC validation because WM_MACRODLGRUNMACRO, the Run a Macro Multiple Times entry point, calls macroPlayback() without the validation used by command(). A tampered shortcuts.xml macro that is blocked through the Macro menu or a shortcut key can therefore execute through the multi-run dialog and invoke internal Notepad++ commands, including commands that launch external programs, in the current user context. This issue is fixed in version 8.9.8. | ||||
| CVE-2026-84301 | 1 Labring | 1 Fastgpt | 2026-09-26 | 6.3 Medium |
| FastGPT is an open-source LLM platform for building AI applications on a knowledge base. Prior to 4.15.2, the safe Axios request interceptor in packages/service/common/api/axios.ts validates a hostname with isInternalAddress() before a later HTTP connection performs an independent DNS lookup, creating a DNS rebinding window, allowing an attacker-controlled hostname to resolve publicly during the check and to a loopback, private, link-local, or metadata address during connection. An authenticated attacker who can supply a URL to a safe-Axios-backed HTTP tool, workflow HTTP node, external file fetch, or other server-side integration can use this time-of-check/time-of-use gap to reach services that direct private-address inputs would block. The same independent re-resolution occurs after manual redirect hops because each redirect target is checked before a separate connection lookup. This issue is fixed in version 4.15.2. | ||||
| CVE-2026-83660 | 3 Adobe, Linux, Microsoft | 4 Campaign, Campaign Classic, Linux Kernel and 1 more | 2026-09-26 | 9.9 Critical |
| Adobe Campaign Classic (ACC) is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-83601 | 1 Netdata | 1 Netdata | 2026-09-26 | 6.5 Medium |
| Netdata is an open source observability tool. Prior to 2.10.4, an authenticated child agent can send an oversized DIMENSION SLOT value that str2ull_encoded passes to pluginsd_rrddim_put_to_slot in src/plugins.d/pluginsd_internals.h without an upper bound. prd_array_create in src/database/rrdset-pluginsd-array.h can then wrap the size_t allocation calculation while retaining the original large array size, causing the subsequent initialization loop to write beyond the undersized heap allocation and crash the parent agent. This issue is fixed in version 2.10.4 and nightly build 2.10.0-782-nightly. | ||||