Export limit exceeded: 18656 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18656 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43148 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array(). | ||||
| CVE-2026-43064 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed. | ||||
| CVE-2026-43072 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: platform_get_irq_byname() returns an int platform_get_irq_byname() will return a negative value if an error happens, so it should be checked and not just passed directly into devm_request_threaded_irq() hoping all will be ok. | ||||
| CVE-2026-43059 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced mgmt_pending_valid(), which not only validates the pending command but also unlinks it from the pending list if it is valid. This change in semantics requires updates to several completion handlers to avoid list corruption and memory safety issues. This patch addresses two left-over issues from the aforementioned rework: 1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove() is replaced with mgmt_pending_free() in the success path. Since mgmt_pending_valid() already unlinks the command at the beginning of the function, calling mgmt_pending_remove() leads to a double list_del() and subsequent list corruption/kernel panic. 2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error path is removed. Since the current command is already unlinked by mgmt_pending_valid(), this foreach loop would incorrectly target other pending mesh commands, potentially freeing them while they are still being processed concurrently (leading to UAFs). The redundant mgmt_cmd_status() is also simplified to use cmd->opcode directly. | ||||
| CVE-2026-43061 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized. | ||||
| CVE-2026-43066 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. | ||||
| CVE-2026-43069 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid. | ||||
| CVE-2026-43073 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quadwords can be non-temporal on x86. The exception handling means that it _can_ be used for user space accesses, but not on its own - it needs all the normal "start user space access" logic around it. But typically the user space access would be the source, not the non-temporal destination. That was the original intention of this, where the destination was some fragile persistent memory target that needed non-temporal stores in order to catch machine check exceptions synchronously and deal with them gracefully. Thus that non-descriptive name: one use case was to copy from user space into a non-cached kernel buffer. However, the existing users are a mix of that intended use-case, and a couple of random drivers that just did this as a performance tweak. Some of those random drivers then actively misused the user copying version (with STAC/CLAC and all) to do kernel copies without ever even caring about the exception handling, _just_ for the non-temporal destination. Rename it as a first small step to actually make it halfway sane, and change the prototype to be more normal: it doesn't take a user pointer unless the caller has done the proper conversion, and the argument size is the full size_t (it still won't actually copy more than 4GB in one go, but there's also no reason to silently truncate the size argument in the caller). Finally, use this now sanely named function in the NTB code, which mis-used a user copy version (with STAC/CLAC and all) of this interface despite it not actually being a user copy at all. | ||||
| CVE-2025-71295 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/buffer: add alert in try_to_free_buffers() for folios without buffers try_to_free_buffers() can be called on folios with no buffers attached when filemap_release_folio() is invoked on a folio belonging to a mapping with AS_RELEASE_ALWAYS set but no release_folio operation defined. In such cases, folio_needs_release() returns true because of the AS_RELEASE_ALWAYS flag, but the folio has no private buffer data. This causes try_to_free_buffers() to call drop_buffers() on a folio with no buffers, leading to a null pointer dereference. Adding a check in try_to_free_buffers() to return early if the folio has no buffers attached, with WARN_ON_ONCE() to alert about the misconfiguration. This provides defensive hardening. | ||||
| CVE-2026-33116 | 3 Apple, Linux, Microsoft | 18 Macos, Linux Kernel, .net and 15 more | 2026-05-06 | 7.5 High |
| Loop with unreachable exit condition ('infinite loop') in .NET, .NET Framework, Visual Studio allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-32203 | 3 Apple, Linux, Microsoft | 7 Macos, Linux Kernel, .net and 4 more | 2026-05-06 | 7.5 High |
| Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-43090 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix refcount leak in xfrm_migrate_policy_find syzkaller reported a memory leak in xfrm_policy_alloc: BUG: memory leak unreferenced object 0xffff888114d79000 (size 1024): comm "syz.1.17", pid 931 ... xfrm_policy_alloc+0xb3/0x4b0 net/xfrm/xfrm_policy.c:432 The root cause is a double call to xfrm_pol_hold_rcu() in xfrm_migrate_policy_find(). The lookup function already returns a policy with held reference, making the second call redundant. Remove the redundant xfrm_pol_hold_rcu() call to fix the refcount imbalance and prevent the memory leak. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-43085 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(), consistent with how __build_packet_message() already constructs NFULNL_MSG_PACKET headers. | ||||
| CVE-2026-43081 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+ Fix the field masks to match the hardware layout documented in downstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*). Notably this fixes a WARN I was seeing when I tried to send "stop" to the MPSS remoteproc while IPA was up. | ||||
| CVE-2026-31458 | 1 Linux | 1 Linux Kernel | 2026-05-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0] Multiple sysfs command paths dereference contexts_arr[0] without first verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to 0 via sysfs while DAMON is running, causing NULL pointer dereferences. In more detail, the issue can be triggered by privileged users like below. First, start DAMON and make contexts directory empty (kdamond->contexts->nr == 0). # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/nr_contexts Then, each of below commands will cause the NULL pointer dereference. # echo update_schemes_stats > state # echo update_schemes_tried_regions > state # echo update_schemes_tried_bytes > state # echo update_schemes_effective_quotas > state # echo update_tuned_intervals > state Guard all commands (except OFF) at the entry point of damon_sysfs_handle_cmd(). | ||||
| CVE-2026-31457 | 1 Linux | 1 Linux Kernel | 2026-05-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr in repeat_call_fn damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(), damon_sysfs_upd_schemes_stats(), and damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr. If nr_contexts is set to 0 via sysfs while DAMON is running, these functions dereference contexts_arr[0] and cause a NULL pointer dereference. Add the missing check. For example, the issue can be reproduced using DAMON sysfs interface and DAMON user-space tool (damo) [1] like below. $ sudo damo start --refresh_interval 1s $ echo 0 | sudo tee \ /sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts | ||||
| CVE-2026-31456 | 1 Linux | 1 Linux Kernel | 2026-05-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock(). | ||||
| CVE-2026-31455 | 1 Linux | 1 Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | ||||
| CVE-2026-43068 | 1 Linux | 1 Linux Kernel | 2026-05-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error. | ||||
| CVE-2024-47698 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] | ||||