Export limit exceeded: 376879 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 21532 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21532 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47026 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: destroy sysfs after removing session from active list A session can be removed dynamically by sysfs interface "remove_path" that eventually calls rtrs_clt_remove_path_from_sysfs function. The current rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and frees sess->stats object. Second it removes the session from the active list. Therefore some functions could access non-connected session and access the freed sess->stats object even-if they check the session status before accessing the session. For instance rtrs_clt_request and get_next_path_min_inflight check the session status and try to send IO to the session. The session status could be changed when they are trying to send IO but they could not catch the change and update the statistics information in sess->stats object, and generate use-after-free problem. (see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats") This patch changes the rtrs_clt_remove_path_from_sysfs to remove the session from the active session list and then destroy the sysfs interfaces. Each function still should check the session status because closing or error recovery paths can change the status. | ||||
| CVE-2021-47025 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume. | ||||
| CVE-2021-47023 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix port event handling on init For some reason there might be a crash during ports creation if port events are handling at the same time because fw may send initial port event with down state. The crash points to cancel_delayed_work() which is called when port went is down. Currently I did not find out the real cause of the issue, so fixed it by cancel port stats work only if previous port's state was up & runnig. The following is the crash which can be triggered: [ 28.311104] Unable to handle kernel paging request at virtual address 000071775f776600 [ 28.319097] Mem abort info: [ 28.321914] ESR = 0x96000004 [ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits [ 28.330350] SET = 0, FnV = 0 [ 28.333430] EA = 0, S1PTW = 0 [ 28.336597] Data abort info: [ 28.339499] ISV = 0, ISS = 0x00000004 [ 28.343362] CM = 0, WnR = 0 [ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000 [ 28.352842] [000071775f776600] pgd=0000000000000000, p4d=0000000000000000 [ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 28.365310] Modules linked in: prestera_pci(+) prestera uio_pdrv_genirq [ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted 5.11.0-rc4 #1 [ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn [prestera_pci] [ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 28.397468] pc : get_work_pool+0x48/0x60 [ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0 [ 28.406018] sp : ffff80001391bc60 [ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000 [ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88 [ 28.420089] x25: 0000000000000000 x24: ffff000106119760 [ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000 [ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0 [ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0 [ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88 [ 28.446898] x15: 0000000000000001 x14: 00000000000002ba [ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4 [ 28.457622] x11: 0000000000000030 x10: 000000000000000c [ 28.462985] x9 : 000000000000000c x8 : 0000000000000030 [ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758 [ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60 [ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060 [ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8 [ 28.489791] Call trace: [ 28.492259] get_work_pool+0x48/0x60 [ 28.495874] cancel_delayed_work+0x38/0xb0 [ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera] [ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera] [ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci] [ 28.516660] process_one_work+0x1e8/0x360 [ 28.520710] worker_thread+0x44/0x480 [ 28.524412] kthread+0x154/0x160 [ 28.527670] ret_from_fork+0x10/0x38 [ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020) [ 28.537429] ---[ end trace 5eced933df3a080b ]--- | ||||
| CVE-2021-47022 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix memleak when mt7615_unregister_device() mt7615_tx_token_put() should get call before mt76_free_pending_txwi(). | ||||
| CVE-2021-47021 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix memleak when mt7915_unregister_device() mt7915_tx_token_put() should get call before mt76_free_pending_txwi(). | ||||
| CVE-2021-47020 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: stream: fix memory leak in stream config error path When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. | ||||
| CVE-2021-47019 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible invalid register access Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2021-47018 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. | ||||
| CVE-2021-47016 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: m68k: mvme147,mvme16x: Don't wipe PCC timer config bits Don't clear the timer 1 configuration bits when clearing the interrupt flag and counter overflow. As Michael reported, "This results in no timer interrupts being delivered after the first. Initialization then hangs in calibrate_delay as the jiffies counter is not updated." On mvme16x, enable the timer after requesting the irq, consistent with mvme147. | ||||
| CVE-2021-47012 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix a use after free in siw_alloc_mr Our code analyzer reported a UAF. In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a freed object. After, the execution continue up to the err_out branch of siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr). My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {} section, to avoid the uaf. | ||||
| CVE-2021-47010 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: Only allow init netns to set default tcp cong to a restricted algo tcp_set_default_congestion_control() is netns-safe in that it writes to &net->ipv4.tcp_congestion_control, but it also sets ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced. This has the unintended side-effect of changing the global net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control readonly in non-init netns") Resolve this netns "leak" by only allowing the init netns to set the default algorithm to one that is restricted. This restriction could be removed if tcp_allowed_congestion_control were namespace-ified in the future. This bug was uncovered with https://github.com/JonathonReinhart/linux-netns-sysctl-verify | ||||
| CVE-2021-47009 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak on object td Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc] | ||||
| CVE-2021-47008 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Make sure GHCB is mapped before updating Access to the GHCB is mainly in the VMGEXIT path and it is known that the GHCB will be mapped. But there are two paths where it is possible the GHCB might not be mapped. The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform the caller of the AP Reset Hold NAE event that a SIPI has been delivered. However, if a SIPI is performed without a corresponding AP Reset Hold, then the GHCB might not be mapped (depending on the previous VMEXIT), which will result in a NULL pointer dereference. The svm_complete_emulated_msr() routine will update the GHCB to inform the caller of a RDMSR/WRMSR operation about any errors. While it is likely that the GHCB will be mapped in this situation, add a safe guard in this path to be certain a NULL pointer dereference is not encountered. | ||||
| CVE-2021-47007 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix panic during f2fs_resize_fs() f2fs_resize_fs() hangs in below callstack with testcase: - mkfs 16GB image & mount image - dd 8GB fileA - dd 8GB fileB - sync - rm fileA - sync - resize filesystem to 8GB kernel BUG at segment.c:2484! Call Trace: allocate_segment_by_default+0x92/0xf0 [f2fs] f2fs_allocate_data_block+0x44b/0x7e0 [f2fs] do_write_page+0x5a/0x110 [f2fs] f2fs_outplace_write_data+0x55/0x100 [f2fs] f2fs_do_write_data_page+0x392/0x850 [f2fs] move_data_page+0x233/0x320 [f2fs] do_garbage_collect+0x14d9/0x1660 [f2fs] free_segment_range+0x1f7/0x310 [f2fs] f2fs_resize_fs+0x118/0x330 [f2fs] __f2fs_ioctl+0x487/0x3680 [f2fs] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is we forgot to check that whether we have enough space in resized filesystem to store all valid blocks in before-resizing filesystem, then allocator will run out-of-space during block migration in free_segment_range(). | ||||
| CVE-2021-47006 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook The commit 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()") set a default event->overflow_handler in perf_event_alloc(), and replace the check event->overflow_handler with is_default_overflow_handler(), but one is missing. Currently, the bp->overflow_handler can not be NULL. As a result, enable_single_step() is always not invoked. Comments from Zhen Lei: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210207105934.2001-1-thunder.leizhen@huawei.com/ | ||||
| CVE-2021-47005 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix NULL pointer dereference for ->get_features() get_features ops of pci_epc_ops may return NULL, causing NULL pointer dereference in pci_epf_test_alloc_space function. Let us add a check for pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid any such NULL pointer dereference and return -ENOTSUPP in case pci_epc_feature is not found. When the patch is not applied and EPC features is not implemented in the platform driver, we see the following dump due to kernel NULL pointer dereference. Call trace: pci_epf_test_bind+0xf4/0x388 pci_epf_bind+0x3c/0x80 pci_epc_epf_link+0xa8/0xcc configfs_symlink+0x1a4/0x48c vfs_symlink+0x104/0x184 do_symlinkat+0x80/0xd4 __arm64_sys_symlinkat+0x1c/0x24 el0_svc_common.constprop.3+0xb8/0x170 el0_svc_handler+0x70/0x88 el0_svc+0x8/0x640 Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400) ---[ end trace a438e3c5a24f9df0 ]--- | ||||
| CVE-2021-47004 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid touching checkpointed data in get_victim() In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR mode to select victim: 1. LFS is set to find source section during GC, the victim should have no checkpointed data, since after GC, section could not be set free for reuse. Previously, we only check valid chpt blocks in current segment rather than section, fix it. 2. SSR | AT_SSR are set to find target segment for writes which can be fully filled by checkpointed and newly written blocks, we should never select such segment, otherwise it can cause panic or data corruption during allocation, potential case is described as below: a) target segment has 'n' (n < 512) ckpt valid blocks b) GC migrates 'n' valid blocks to other segment (segment is still in dirty list) c) GC migrates '512 - n' blocks to target segment (segment has 'n' cp_vblocks and '512 - n' vblocks) d) If GC selects target segment via {AT,}SSR allocator, however there is no free space in targe segment. | ||||
| CVE-2021-47003 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced") | ||||
| CVE-2021-46998 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethernet:enic: Fix a use after free bug in enic_hard_start_xmit In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside enic_queue_wq_skb, if some error happens, the skb will be freed by dev_kfree_skb(skb). But the freed skb is still used in skb_tx_timestamp(skb). My patch makes enic_queue_wq_skb() return error and goto spin_unlock() incase of error. The solution is provided by Govind. See https://lkml.org/lkml/2021/4/30/961. | ||||
| CVE-2021-46997 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: entry: always set GIC_PRIO_PSR_I_SET during entry Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ #463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 | ||||