Export limit exceeded: 378685 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378685 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72067 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Preserve per instance callback errors cpuhp_invoke_callback() unwinds earlier callbacks for the same hotplug state when one instance fails. The rollback path currently reuses ret, so a successful rollback can hide the original error and make the failed transition look successful. Keep the rollback result separate from the original error. | ||||
| CVE-2026-72071 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Fix use-after-free in user_event_mm_dup() user_event_mm_dup() walks the parent mm's enabler list locklessly under rcu_read_lock() during fork() (from copy_process()); it does not take event_mutex: rcu_read_lock(); list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link) enabler->event = user_event_get(orig->event); user_event_enabler_destroy() removes an enabler from that list with list_del_rcu() and then, without waiting for a grace period, drops the enabler's user_event reference with user_event_put() and frees the enabler with kfree(). A reader that loaded the enabler before the list_del_rcu() can still be walking it, which leads to two use-after-frees: - kfree(enabler) frees the enabler while that reader dereferences enabler->event. - user_event_put() may drop the last reference to the user_event, which is then freed (via delayed_destroy_user_event() on a work queue), while the same reader does user_event_get(orig->event) on it. Both are reachable by an unprivileged task that can open user_events_data: one multithreaded process that registers an enabler and then concurrently unregisters it and calls fork() triggers the race. KASAN reports a slab-use-after-free in user_event_mm_dup() during clone(), with a "refcount_t: addition on 0" warning when the user_event is freed. The enabler use-after-free was found first; the user_event one was reported by XIAO WU, and the earlier enabler-only fix did not address it. Defer both the user_event_put() and the kfree(enabler) to a work item queued with queue_rcu_work(), so they run only after an RCU grace period, once all readers walking the enabler list have finished. The put must run in process context because user_event_put() takes event_mutex on the last reference, so a work queue is used rather than call_rcu(). The now-unlocked put lets the locked argument of user_event_enabler_destroy() be removed; all callers are updated. | ||||
| CVE-2026-19728 | 2 Actpro, Wordpress | 2 Extra Product Options For Woocommerce, Wordpress | 2026-08-17 | 7.5 High |
| The Extra Product Options Builder for WooCommerce WordPress plugin before 1.2.176 does not verify that the requester is entitled to a customer-uploaded file before serving it, allowing unauthenticated users who obtain a file's stored name to retrieve it. The Extra Product Options Builder for WooCommerce WordPress plugin before 1.2.176 writes a deny-all rule into its upload directories, so the disclosure only crosses a boundary on web servers that honour it, such as Apache. Where it is ignored, as on a default nginx setup, the same files are already served at their direct URL and the endpoint exposes nothing further. | ||||
| CVE-2026-68472 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate EHT MLE before MLD ID read cfg80211_gen_new_ie() copies ML probe response elements from the parent frame when the parent EHT multi-link element has an MLD ID matching the nontransmitted BSSID index. The code only checked that the extension element had more than one byte before calling ieee80211_mle_get_mld_id(). That helper assumes a BASIC MLE with enough common info and documents that callers must first use ieee80211_mle_type_ok(). Attack chain: malicious AP sends a short EHT MLE in an MBSSID beacon. cfg80211_inform_bss_frame_data() stores the copied IE buffer. cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE. cfg80211_gen_new_ie() sees the EHT MLE in the parent frame. ieee80211_mle_get_mld_id() then reads past the IE boundary. Validate the MLE type and size before reading the MLD ID. This matches the contract required by the MLE helper and rejects the short element before any internal MLE fields are accessed. | ||||
| CVE-2026-68474 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access() spufs_mem_mmap_access() computes the local store offset as address - vma->vm_start, but bounds-checks it against vma->vm_end instead of the local store size. On 64-bit, offset is always well below vma->vm_end, so the clamp never fires and len stays unbounded against the LS_SIZE buffer returned by ctx->ops->get_ls(). Reject offsets at or beyond LS_SIZE and clamp len to the remaining space, mirroring the guard already used by spufs_mem_mmap_fault() and spufs_ps_fault(). | ||||
| CVE-2026-72024 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: remove interfaces with RCU list deletion Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed. | ||||
| CVE-2026-72083 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. | ||||
| CVE-2026-72089 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. Reject logs whose size is smaller than the header (which also rejects size == 0). | ||||
| CVE-2026-72095 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array. | ||||
| CVE-2026-72107 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. | ||||
| CVE-2026-19714 | 2 Simple Jwt Login Project, Wordpress | 2 Simple Jwt Login, Wordpress | 2026-08-17 | 9.1 Critical |
| The Simple JWT Login WordPress plugin before 3.6.8 does not validate the audience of the Google identity tokens it accepts, allowing unauthenticated users to authenticate as any user whose email address such a token carries, up to and including an administrator. Every site with the Simple JWT Login WordPress plugin before 3.6.8's Google sign-in enabled is affected. | ||||
| CVE-2026-15370 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 6.7 Medium |
| A flaw was found in libssh. During SFTP server directory listing, the longname field is constructed with unsafe concatenation into a fixed-size stack buffer. When a client causes the server to list attacker-controlled filenames, sufficiently long names can overflow that stack buffer and may lead to crashes or possible code execution on the server. | ||||
| CVE-2026-72018 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | ||||
| CVE-2026-72220 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: harden rq_procinfo lifecycle to prevent double-free The svc_release_rqst() function executes the callback inside rqstp->rq_procinfo->pc_release. However, if a worker thread begins processing a new request and encounters an early error path (e.g., unsupported protocol, short frame, or bad auth) before a valid rq_procinfo is installed, a stale release hook can be re-triggered against reused state from the previous RPC, resulting in a double-free or use-after-free vulnerability. Harden the lifecycle of rq_procinfo by: 1. Ensuring svc_release_rqst() always clears rq_procinfo after the optional pc_release() call, regardless of whether the hook exists. 2. Explicitly clearing rq_procinfo at request entry in svc_process() before any early decode or drop paths. 3. Ensuring svc_process_bc() does the same at backchannel entry. This guarantees that error flows will not encounter a non-NULL stale rq_procinfo pointer when there is nothing to release. | ||||
| CVE-2026-50768 | 2026-08-17 | 9.8 Critical | ||
| File Upload vulnerability in T-Systems International GmbH ImageMaster Version: 9.14.2.8.1 allows a remote attacker to execute arbitrary code via the add attachments feature in the create new document function. | ||||
| CVE-2026-19589 | 1 Hashicorp | 1 Packer | 2026-08-17 | 7.1 High |
| Packer up to 1.15.4 is vulnerable to an issue in the third-party plugin installer that may allow unintended file system modification and could lead to code execution. A user who installs a plugin from a malicious or compromised source may be affected. This vulnerability (CVE-2026-19589) is fixed in Packer 1.16.0. | ||||
| CVE-2026-40506 | 1 Openemr | 1 Openemr | 2026-08-17 | 6.5 Medium |
| OpenEMR before 8.2.0 contains a path traversal vulnerability in the standard_tables_manage.php interface where the db GET parameter is passed without validation to temp_dir_cleanup(), which joins the value to the PHP temporary directory path and recursively deletes the resulting directory. Attackers can supply a traversal sequence in the db parameter to resolve outside the intended temporary directory, and by chaining this with an open redirect in dicom_frame.php, an unauthenticated attacker can deliver a crafted URL that triggers arbitrary recursive directory deletion within an authenticated Superuser's session. | ||||
| CVE-2026-43720 | 1 Apple | 5 Ios And Ipados, Ipados, Iphone Os and 2 more | 2026-08-17 | 6.5 Medium |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26.5.2, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. | ||||
| CVE-2026-43776 | 1 Apple | 4 Ios And Ipados, Ipados, Iphone Os and 1 more | 2026-08-17 | 7.8 High |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6. Processing a maliciously crafted file may lead to unexpected app termination or arbitrary code execution. | ||||
| CVE-2026-39868 | 1 Apple | 4 Ios And Ipados, Ipados, Iphone Os and 1 more | 2026-08-17 | 9.1 Critical |
| This issue was addressed with improved input validation. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination or corrupt kernel memory. | ||||