Export limit exceeded: 26156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26156 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/type1: fix cap_migration information leak Fix an information leak where an uninitialized hole in struct vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace. The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as shown in this pahole(1) output: struct vfio_iommu_type1_info_cap_migration { struct vfio_info_cap_header header; /* 0 8 */ __u32 flags; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ __u64 pgsize_bitmap; /* 16 8 */ __u64 max_dirty_bitmap_size; /* 24 8 */ /* size: 32, cachelines: 1, members: 4 */ /* sum members: 28, holes: 1, sum holes: 4 */ /* last cacheline: 32 bytes */ }; The cap_mig variable is filled in without initializing the hole: static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu, struct vfio_info_cap *caps) { struct vfio_iommu_type1_info_cap_migration cap_mig; cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION; cap_mig.header.version = 1; cap_mig.flags = 0; /* support minimum pgsize */ cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap); cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX; return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig)); } The structure is then copied to a temporary location on the heap. At this point it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace later: int vfio_info_add_capability(struct vfio_info_cap *caps, struct vfio_info_cap_header *cap, size_t size) { struct vfio_info_cap_header *header; header = vfio_info_cap_add(caps, size, cap->id, cap->version); if (IS_ERR(header)) return PTR_ERR(header); memcpy(header + 1, cap + 1, size - sizeof(*header)); return 0; } This issue was found by code inspection. | ||||
| CVE-2022-50771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state() Running rcutorture with non-zero fqs_duration module parameter in a kernel built with CONFIG_PREEMPTION=y results in the following splat: BUG: using __this_cpu_read() in preemptible [00000000] code: rcu_torture_fqs/398 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 3 PID: 398 Comm: rcu_torture_fqs Not tainted 6.0.0-rc1-yoctodev-standard+ Call Trace: <TASK> dump_stack_lvl+0x5b/0x86 dump_stack+0x10/0x16 check_preemption_disabled+0xe5/0xf0 __this_cpu_preempt_check+0x13/0x20 rcu_force_quiescent_state.part.0+0x1c/0x170 rcu_force_quiescent_state+0x1e/0x30 rcu_torture_fqs+0xca/0x160 ? rcu_torture_boost+0x430/0x430 kthread+0x192/0x1d0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> The problem is that rcu_force_quiescent_state() uses __this_cpu_read() in preemptible code instead of the proper raw_cpu_read(). This commit therefore changes __this_cpu_read() to raw_cpu_read(). | ||||
| CVE-2023-54144 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kernel warning during topology setup This patch fixes the following kernel warning seen during driver load by correctly initializing the p2plink attr before creating the sysfs file: [ +0.002865] ------------[ cut here ]------------ [ +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called. [ +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0 [ +0.001361] Call Trace: [ +0.001234] <TASK> [ +0.001067] kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu] [ +0.003147] kfd_topology_update_sysfs+0x3d/0x750 [amdgpu] [ +0.002890] kfd_topology_add_device+0xbd7/0xc70 [amdgpu] [ +0.002844] ? lock_release+0x13c/0x2e0 [ +0.001936] ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu] [ +0.003313] ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu] [ +0.002703] kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu] [ +0.002930] amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu] [ +0.002944] amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu] [ +0.002970] ? pci_bus_read_config_word+0x43/0x80 [ +0.002380] amdgpu_driver_load_kms+0x15/0x100 [amdgpu] [ +0.002744] amdgpu_pci_probe+0x147/0x370 [amdgpu] [ +0.002522] local_pci_probe+0x40/0x80 [ +0.001896] work_for_cpu_fn+0x10/0x20 [ +0.001892] process_one_work+0x26e/0x5a0 [ +0.002029] worker_thread+0x1fd/0x3e0 [ +0.001890] ? process_one_work+0x5a0/0x5a0 [ +0.002115] kthread+0xea/0x110 [ +0.001618] ? kthread_complete_and_exit+0x20/0x20 [ +0.002422] ret_from_fork+0x1f/0x30 [ +0.001808] </TASK> [ +0.001103] irq event stamp: 59837 [ +0.001718] hardirqs last enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60 [ +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60 [ +0.004414] softirqs last enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004203] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-54145 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: drop unnecessary user-triggerable WARN_ONCE in verifierl log It's trivial for user to trigger "verifier log line truncated" warning, as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at least two pieces of user-provided information that can be output through this buffer, and both can be arbitrarily sized by user: - BTF names; - BTF.ext source code lines strings. Verifier log buffer should be properly sized for typical verifier state output. But it's sort-of expected that this buffer won't be long enough in some circumstances. So let's drop the check. In any case code will work correctly, at worst truncating a part of a single line output. | ||||
| CVE-2022-50766 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code") missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must not be moved to after clean_tree_block() because clean_tree_block() is calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs: Fix extent_buffer usage when nodesize != leafsize"). Since memzero_extent_buffer() will reset "struct btrfs_header" part, we can't move btrfs_set_header_generation() to before memzero_extent_buffer(). Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block(). | ||||
| CVE-2023-54154 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix target_cmd_counter leak The target_cmd_counter struct allocated via target_alloc_cmd_counter() is never freed, resulting in leaks across various transport types, e.g.: unreferenced object 0xffff88801f920120 (size 96): comm "sh", pid 102, jiffies 4294892535 (age 713.412s) hex dump (first 32 bytes): 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8....... backtrace: [<00000000e58a6252>] kmalloc_trace+0x11/0x20 [<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod] [<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod] [<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop] [<000000006a80e021>] configfs_write_iter+0xb1/0x120 [<00000000e9f4d860>] vfs_write+0x2e4/0x3c0 [<000000008143433b>] ksys_write+0x80/0xb0 [<00000000a7df29b2>] do_syscall_64+0x42/0x90 [<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Free the structure alongside the corresponding iscsit_conn / se_sess parent. | ||||
| CVE-2023-54155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). | ||||
| CVE-2023-54158 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't free qgroup space unless specified Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. | ||||
| CVE-2023-54159 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: fix kernel panic at qmu transfer done irq handler When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it. e.g. qmu done irq on cpu0 thread running on cpu1 qmu_done_tx() handle gpd [0] mtu3_requ_complete() mtu3_gadget_ep_disable() unlock @mtu->lock give back request lock @mtu->lock mtu3_ep_disable() mtu3_gpd_ring_free() unlock @mtu->lock lock @mtu->lock get next gpd [1] [1]: goto [0] to handle next gpd, and next gpd may be NULL. | ||||
| CVE-2022-50765 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: kexec: Fix memory leak of elf header buffer This is reported by kmemleak detector: unreferenced object 0xff2000000403d000 (size 4096): comm "kexec", pid 146, jiffies 4294900633 (age 64.792s) hex dump (first 32 bytes): 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............ 04 00 f3 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000566ca97c>] kmemleak_vmalloc+0x3c/0xbe [<00000000979283d8>] __vmalloc_node_range+0x3ac/0x560 [<00000000b4b3712a>] __vmalloc_node+0x56/0x62 [<00000000854f75e2>] vzalloc+0x2c/0x34 [<00000000e9a00db9>] crash_prepare_elf64_headers+0x80/0x30c [<0000000067e8bf48>] elf_kexec_load+0x3e8/0x4ec [<0000000036548e09>] kexec_image_load_default+0x40/0x4c [<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322 [<0000000040c62c03>] ret_from_syscall+0x0/0x2 In elf_kexec_load(), a buffer is allocated via vzalloc() to store elf headers. While it's not freed back to system when kdump kernel is reloaded or unloaded, or when image->elf_header is successfully set and then fails to load kdump kernel for some reason. Fix it by freeing the buffer in arch_kimage_file_post_load_cleanup(). | ||||
| CVE-2022-50744 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a hard lockup similar to the call trace below may occur. The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer interrupts as expected, so change the strength of the spin lock to _irq. Kernel panic - not syncing: Hard LOCKUP CPU: 3 PID: 110402 Comm: cat Kdump: loaded exception RIP: native_queued_spin_lock_slowpath+91 [IRQ stack] native_queued_spin_lock_slowpath at ffffffffb814e30b _raw_spin_lock at ffffffffb89a667a lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc] lpfc_cmf_timer at ffffffffc0abbc67 [lpfc] __hrtimer_run_queues at ffffffffb8184250 hrtimer_interrupt at ffffffffb8184ab0 smp_apic_timer_interrupt at ffffffffb8a026ba apic_timer_interrupt at ffffffffb8a01c4f [End of IRQ stack] apic_timer_interrupt at ffffffffb8a01c4f lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc] lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc] full_proxy_read at ffffffffb83e7fc3 vfs_read at ffffffffb833fe71 ksys_read at ffffffffb83402af do_syscall_64 at ffffffffb800430b entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad | ||||
| CVE-2022-50740 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2022-50738 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix an iotlb memory leak Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during release to free all the resources allocated when processing user IOTLB messages through vhost_vdpa_process_iotlb_update(). That commit changed the handling of IOTLB a bit, and we accidentally removed some code called during the release. We partially fixed this with commit 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release") but a potential memory leak is still there as showed by kmemleak if the application does not send VHOST_IOTLB_INVALIDATE or crashes: unreferenced object 0xffff888007fbaa30 (size 16): comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s) hex dump (first 16 bytes): 40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00 @sA............. backtrace: [<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0 [<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa] [<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost] [<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa] [<00000000de1cd4a0>] vfs_write+0x216/0x4b0 [<00000000a2850200>] ksys_write+0x71/0xf0 [<00000000de8e720b>] __x64_sys_write+0x19/0x20 [<0000000018b12cbb>] do_syscall_64+0x3f/0x90 [<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup() since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap(). vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap() on the whole range removes all the entries. The kmemleak log reported was observed with a vDPA device that has `use_va` set to true (e.g. VDUSE). This patch has been tested with both types of devices. | ||||
| CVE-2022-50735 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: do not run mt76u_status_worker if the device is not running Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: mt76x02_send_tx_status+0x1d2/0xeb0 mt76x02_tx_status_data+0x8e/0xd0 mt76u_tx_status_data+0xe1/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 ret_from_fork+0x1f/0x30 Modules linked in: --[ end trace 8df5d20fc5040f65 ]-- RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Moreover move stat_work schedule out of the for loop. | ||||
| CVE-2022-50731 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: akcipher - default implementation for setting a private key Changes from v1: * removed the default implementation from set_pub_key: it is assumed that an implementation must always have this callback defined as there are no use case for an algorithm, which doesn't need a public key Many akcipher implementations (like ECDSA) support only signature verifications, so they don't have all callbacks defined. Commit 78a0324f4a53 ("crypto: akcipher - default implementations for request callbacks") introduced default callbacks for sign/verify operations, which just return an error code. However, these are not enough, because before calling sign the caller would likely call set_priv_key first on the instantiated transform (as the in-kernel testmgr does). This function does not have a default stub, so the kernel crashes, when trying to set a private key on an akcipher, which doesn't support signature generation. I've noticed this, when trying to add a KAT vector for ECDSA signature to the testmgr. With this patch the testmgr returns an error in dmesg (as it should) instead of crashing the kernel NULL ptr dereference. | ||||
| CVE-2022-50730 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: silence the warning when evicting inode with dioread_nolock When evicting an inode with default dioread_nolock, it could be raced by the unwritten extents converting kworker after writeback some new allocated dirty blocks. It convert unwritten extents to written, the extents could be merged to upper level and free extent blocks, so it could mark the inode dirty again even this inode has been marked I_FREEING. But the inode->i_io_list check and warning in ext4_evict_inode() missing this corner case. Fortunately, ext4_evict_inode() will wait all extents converting finished before this check, so it will not lead to inode use-after-free problem, every thing is OK besides this warning. The WARN_ON_ONCE was originally designed for finding inode use-after-free issues in advance, but if we add current dioread_nolock case in, it will become not quite useful, so fix this warning by just remove this check. ====== WARNING: CPU: 7 PID: 1092 at fs/ext4/inode.c:227 ext4_evict_inode+0x875/0xc60 ... RIP: 0010:ext4_evict_inode+0x875/0xc60 ... Call Trace: <TASK> evict+0x11c/0x2b0 iput+0x236/0x3a0 do_unlinkat+0x1b4/0x490 __x64_sys_unlinkat+0x4c/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fa933c1115b ====== rm kworker ext4_end_io_end() vfs_unlink() ext4_unlink() ext4_convert_unwritten_io_end_vec() ext4_convert_unwritten_extents() ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_try_to_merge_up() __mark_inode_dirty() check !I_FREEING locked_inode_to_wb_and_lock_list() iput() iput_final() evict() ext4_evict_inode() truncate_inode_pages_final() //wait release io_end inode_io_list_move_locked() ext4_release_io_end() trigger WARN_ON_ONCE() | ||||
| CVE-2022-50725 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init() KASAN reports a use-after-free: BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] Call Trace: ... dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge] platform_probe+0xb6/0x170 ... Allocated by task 1238: ... dvb_register_device+0x1a7/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core] vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge] ... Freed by task 1238: dvb_register_device+0x6d2/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core] vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge] ... It is because the error handling in vidtv_bridge_dvb_init() is wrong. First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but goto fail_dmx(_dev): calls release functions again, which causes use-after-free. Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause out-of-bound when i finished its loop (i == NUM_FE). And the loop releasing is wrong, although now NUM_FE is 1 so it won't cause problem. Fix this by correctly releasing everything. | ||||
| CVE-2022-50724 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix resource leak in regulator_register() I got some resource leak reports while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 100, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@64/regulators/buck1 unreferenced object 0xffff88810deea000 (size 512): comm "490-i2c-rt5190a", pid 253, jiffies 4294859840 (age 5061.046s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff a0 1e 00 a1 ff ff ff ff ................ backtrace: [<00000000d78541e2>] kmalloc_trace+0x21/0x110 [<00000000b343d153>] device_private_init+0x32/0xd0 [<00000000be1f0c70>] device_add+0xb2d/0x1030 [<00000000e3e6344d>] regulator_register+0xaf2/0x12a0 [<00000000e2f5e754>] devm_regulator_register+0x57/0xb0 [<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator] unreferenced object 0xffff88810b617b80 (size 32): comm "490-i2c-rt5190a", pid 253, jiffies 4294859904 (age 5060.983s) hex dump (first 32 bytes): 72 65 67 75 6c 61 74 6f 72 2e 32 38 36 38 2d 53 regulator.2868-S 55 50 50 4c 59 00 ff ff 29 00 00 00 2b 00 00 00 UPPLY...)...+... backtrace: [<000000009da9280d>] __kmalloc_node_track_caller+0x44/0x1b0 [<0000000025c6a4e5>] kstrdup+0x3a/0x70 [<00000000790efb69>] create_regulator+0xc0/0x4e0 [<0000000005ed203a>] regulator_resolve_supply+0x2d4/0x440 [<0000000045796214>] regulator_register+0x10b3/0x12a0 [<00000000e2f5e754>] devm_regulator_register+0x57/0xb0 [<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator] After calling regulator_resolve_supply(), the 'rdev->supply' is set by set_supply(), after this set, in the error path, the resources need be released, so call regulator_put() to avoid the leaks. | ||||
| CVE-2022-50721 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. | ||||
| CVE-2022-50714 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix rmmod crash in driver reload test In insmod/rmmod stress test, the following crash dump shows up immediately. The problem is caused by missing mt76_dev in mt7921_pci_remove(). We should make sure the drvdata is ready before probe() finished. [168.862789] ================================================================== [168.862797] BUG: KASAN: user-memory-access in try_to_grab_pending+0x59/0x480 [168.862805] Write of size 8 at addr 0000000000006df0 by task rmmod/5361 [168.862812] CPU: 7 PID: 5361 Comm: rmmod Tainted: G OE 5.19.0-rc6 #1 [168.862816] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, 05/04/2020 [168.862820] Call Trace: [168.862822] <TASK> [168.862825] dump_stack_lvl+0x49/0x63 [168.862832] print_report.cold+0x493/0x6b7 [168.862845] kasan_report+0xa7/0x120 [168.862857] kasan_check_range+0x163/0x200 [168.862861] __kasan_check_write+0x14/0x20 [168.862866] try_to_grab_pending+0x59/0x480 [168.862870] __cancel_work_timer+0xbb/0x340 [168.862898] cancel_work_sync+0x10/0x20 [168.862902] mt7921_pci_remove+0x61/0x1c0 [mt7921e] [168.862909] pci_device_remove+0xa3/0x1d0 [168.862914] device_remove+0xc4/0x170 [168.862920] device_release_driver_internal+0x163/0x300 [168.862925] driver_detach+0xc7/0x1a0 [168.862930] bus_remove_driver+0xeb/0x2d0 [168.862935] driver_unregister+0x71/0xb0 [168.862939] pci_unregister_driver+0x30/0x230 [168.862944] mt7921_pci_driver_exit+0x10/0x1b [mt7921e] [168.862949] __x64_sys_delete_module+0x2f9/0x4b0 [168.862968] do_syscall_64+0x38/0x90 [168.862973] entry_SYSCALL_64_after_hwframe+0x63/0xcd Test steps: 1. insmode 2. do not ifup 3. rmmod quickly (within 1 second) | ||||