Export limit exceeded: 26034 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26034 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone If cloning the SKB fails, don't try to use it, but rather return as if we should pass it. Coverity CID: 1503456 | ||||
| CVE-2022-50786 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: s5p-mfc: Clear workbit to handle error condition During error on CLOSE_INSTANCE command, ctx_work_bits was not getting cleared. During consequent mfc execution NULL pointer dereferencing of this context led to kernel panic. This patch fixes this issue by making sure to clear ctx_work_bits always. | ||||
| CVE-2022-50812 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 A bad bug in clang's implementation of -fzero-call-used-regs can result in NULL pointer dereferences (see the links above the check for more information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a supported GCC version or a clang newer than 15.0.6, which will catch both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have the bug fixed. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50868 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50870 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: avoid device tree lookups in rtas_os_term() rtas_os_term() is called during panic. Its behavior depends on a couple of conditions in the /rtas node of the device tree, the traversal of which entails locking and local IRQ state changes. If the kernel panics while devtree_lock is held, rtas_os_term() as currently written could hang. Instead of discovering the relevant characteristics at panic time, cache them in file-static variables at boot. Note the lookup for "ibm,extended-os-term" is converted to of_property_read_bool() since it is a boolean property, not an RTAS function token. [mpe: Incorporate suggested change from Nick] | ||||
| CVE-2023-54211 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled. | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54252 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings My previous commit introduced a memory leak where the item allocated from tlmi_setting was not freed. This commit also renames it to avoid confusion with the similarly name variable in the same function. | ||||
| CVE-2023-54275 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup crypto_alloc_shash() allocates resources, which should be released by crypto_free_shash(). When ath11k_peer_find() fails, there has memory leak. Add missing crypto_free_shash() to fix this. | ||||
| CVE-2023-54277 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. | ||||
| CVE-2023-54311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock when converting an inline directory in nojournal mode In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock by calling ext4_handle_dirty_dirblock() when it already has taken the directory lock. There is a similar self-deadlock in ext4_incvert_inline_data_nolock() for data files which we'll fix at the same time. A simple reproducer demonstrating the problem: mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64 mount -t ext4 -o dirsync /dev/vdc /vdc cd /vdc mkdir file0 cd file0 touch file0 touch file1 attr -s BurnSpaceInEA -V abcde . touch supercalifragilisticexpialidocious | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-54319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: at91-pio4: check return value of devm_kasprintf() devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks") Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") | ||||
| CVE-2025-40352 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting the following warning when the BlueField-3 SOC is booted: BUG: key ffff00008a3402a8 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0 <snip> Call trace: lockdep_init_map_type+0x1d4/0x2a0 __kernfs_create_file+0x84/0x140 sysfs_add_file_mode_ns+0xcc/0x1cc internal_create_group+0x110/0x3d4 internal_create_groups.part.0+0x54/0xcc sysfs_create_groups+0x24/0x40 device_add+0x6e8/0x93c device_register+0x28/0x40 __hwmon_device_register+0x4b0/0x8a0 devm_hwmon_device_register_with_groups+0x7c/0xe0 mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc] platform_probe+0x70/0x110 The mlxbf_pmc driver must call sysfs_attr_init() during the initialization of the "count_clock" data structure to avoid this warning. | ||||
| CVE-2025-68771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix kernel BUG in ocfs2_find_victim_chain syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the `cl_next_free_rec` field of the allocation chain list (next free slot in the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec) condition in ocfs2_find_victim_chain() and panicking the kernel. To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(), just before calling ocfs2_find_victim_chain(), the code block in it being executed when either of the following conditions is true: 1. `cl_next_free_rec` is equal to 0, indicating that there are no free chains in the allocation chain list 2. `cl_next_free_rec` is greater than `cl_count` (the total number of chains in the allocation chain list) Either of them being true is indicative of the fact that there are no chains left for usage. This is addressed using ocfs2_error(), which prints the error log for debugging purposes, rather than panicking the kernel. | ||||
| CVE-2025-40223 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: Fix use-after-free in hdm_disconnect hdm_disconnect() calls most_deregister_interface(), which eventually unregisters the MOST interface device with device_unregister(iface->dev). If that drops the last reference, the device core may call release_mdev() immediately while hdm_disconnect() is still executing. The old code also freed several mdev-owned allocations in hdm_disconnect() and then performed additional put_device() calls. Depending on refcount order, this could lead to use-after-free or double-free when release_mdev() ran (or when unregister paths also performed puts). Fix by moving the frees of mdev-owned allocations into release_mdev(), so they happen exactly once when the device is truly released, and by dropping the extra put_device() calls in hdm_disconnect() that are redundant after device_unregister() and most_deregister_interface(). This addresses the KASAN slab-use-after-free reported by syzbot in hdm_disconnect(). See report and stack traces in the bug link below. | ||||
| CVE-2023-54152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by moving j1939_sk_errqueue() This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54097 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: stm32-pwr: fix of_iomap leak Smatch reports: drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn: 'base' from of_iomap() not released on lines: 151,166. In stm32_pwr_regulator_probe(), base is not released when devm_kzalloc() fails to allocate memory or devm_regulator_register() fails to register a new regulator device, which may cause a leak. To fix this issue, replace of_iomap() with devm_platform_ioremap_resource(). devm_platform_ioremap_resource() is a specialized function for platform devices. It allows 'base' to be automatically released whether the probe function succeeds or fails. Besides, use IS_ERR(base) instead of !base as the return value of devm_platform_ioremap_resource() can either be a pointer to the remapped memory or an ERR_PTR() encoded error code if the operation fails. | ||||