Export limit exceeded: 395577 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395577 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395577 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90413 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build. | ||||
| CVE-2026-90415 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: free STAG index when TPT entry write fails write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and bumps stats.stag.cur before programming the entry. When write_adapter_mem() fails, it returns the error without releasing the index or reversing the statistic. No MR is inserted into rhp->mrs, so deregistration never reclaims it, leaking the index until device teardown. Record whether this call allocated the index and, on a failed write, return it to tpt_table and decrement stats.stag.cur. Key the rollback on both the write error and that flag, not the error alone: a non-reset update carries a caller-owned STAG that this call did not allocate and must not free. | ||||
| CVE-2026-93041 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock before changing request and status. issue_pending() can acquire the lock in that small window, observe the old busy state, and skip starting queued descriptors. Then the abort handler overwrites the channel status as idle, leaving the new descriptors stranded for good. Keep descriptor completion and the state transition in the same critical section. | ||||
| CVE-2026-90426 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq(). Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in that window makes tegra241_cmdqv_isr() read the stale slot and hand it to tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer. Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight handlers to finish and blocks new ones, so no ISR can observe a VINTF as it is torn down. Note: a user-owned VINTF (viommu) could outlive this teardown, which unmaps cmdqv->base and frees cmdqv->vintfs, so a later viommu close then touches freed memory. This is neither introduced nor fixed here: a physical IOMMU is not a pluggable device, so iommufd by design holds no reference on the one behind a viommu, and this teardown is not expected while that viommu is still alive. | ||||
| CVE-2026-90428 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs __tegra241_cmdqv_probe() requests the error IRQ before it has allocated the cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a latched error across a kexec fires the IRQ as soon as it is requested, and tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array. Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that a latched interrupt firing early runs the ISR against a valid array of NULL slots that it safely skips. | ||||
| CVE-2026-92478 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equalization code to index arrays sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts before they can be propagated. | ||||
| CVE-2026-92480 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread. | ||||
| CVE-2026-92481 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for every EINT line and installs a chained handler on the parent interrupt, but none of these are ever released. This was harmless while the drivers were built-in, but now that they can be built as modules and unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings whose chip data points at freed memory, and a chained handler that keeps firing into that freed data. The plain allocations in mtk_eint_do_init() already use the device-managed devm_*() helpers, so tear the remaining resources down the same way: register a devm action that detaches the chained handler, waits for any in-flight handler to finish, disposes of the per-line mappings and removes the IRQ domain. This mirrors the device-managed lifecycle adopted for the GPIO chip and keeps the whole EINT setup self-cleaning on unbind. | ||||
| CVE-2026-93741 | 1 Totolink | 1 A3002mu | 2026-09-19 | 10 Critical |
| A security flaw has been discovered in Totolink A3002MU Hh-B20211125.1046. Affected by this vulnerability is the function formWlWds of the file /boafrm/formWlWds. The manipulation of the argument submit-url results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-90353 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix ext PHY use-after-free on register error path After mt7915_register_ext_phy() succeeded, a failure of the main PHY mt7915_init_debugfs() or mt7915_coredump_register() unwound through free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it was still registered with mac80211, since mt76_unregister_device() only unregisters the main hw. Unregister the ext PHY (thermal + phy + hw) first and skip the redundant free. | ||||
| CVE-2026-90359 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject >8 byte return values on return-reading trampoline paths btf_distill_func_proto() builds the function model used for the fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has accepted a 16-byte __int128 return value since the trampoline was introduced: __get_type_size() returns the integer's type size, and the return-type check only rejected ret < 0. But the BPF trampoline preserves only 8 bytes of the return value (RAX on x86, i.e. R0). For an attach type that reads the target's return value the second half (RDX / R3) is neither saved nor restored, so a program attached to a function returning a 16-byte value corrupts the value seen by the real caller and itself observes only half of it. struct_ops trampolines have the same limitation. This affects the attach types that read the target's return value: fexit, fmod_ret and fsession (plus the _multi variants of fexit and fsession), and struct_ops. fentry/fentry_multi run before the target returns and are unaffected. Reject a >8 byte return value for these attach types in bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for struct_ops in bpf_struct_ops_desc_init(). | ||||
| CVE-2026-90362 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: Drop dev_pm_opp_set_rate(0) dev_pm_opp_set_rate(0) removes the vote specified in required-opps but does not actually park the clock, making it run without the necessary power backing. Drop the explicit call to it. Every call site of ops->link_clk_disable() is followed by pm_runtime_put(), so the power vote will be rescinded if deemed safe. Patchwork: https://patchwork.freedesktop.org/patch/742783/ | ||||
| CVE-2026-92487 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix valid_size extension over a shared writable mapping When a shared writable mapping has its valid_size extended by a buffered write or a page fault, exfat zeroes the page-cache gap below the new valid_size. A store through the mapping can race with this zeroing and be overwritten. Fix this by zeroing the gap lazily. Drop ->map_pages so that every first write fault goes through exfat_page_mkwrite(), which advances valid_size to cover the faulting page. With fault-around enabled, a store could install a writable PTE, skip ->page_mkwrite(), and land past valid_size without advancing it. Extending valid_size one faulting page at a time also leaves never-written pages in a large mapping alone. The gap is filled with block granularity, zeroing only the not-uptodate blocks and preserving blocks that may hold data stored through the mapping. On the buffered-write path the invalidate lock is held and the gap is unmapped before zeroing, so a racing store re-faults and, under the inode lock, completes only after the gap has been zeroed and valid_size covers it. | ||||
| CVE-2026-92492 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks cpufreq_cpu_get() returns NULL when no cpufreq policy is associated with the requested CPU, for example because the CPU is offline or the policy has already been torn down. Both amd_pstate_power_supply_notifier() and amd_pstate_profile_set() acquire a policy via cpufreq_cpu_get() and then pass that pointer to amd_pstate_get_balanced_epp() and amd_pstate_set_epp(), which dereference it unconditionally. A racing CPU hotplug or driver teardown can therefore lead to a NULL pointer dereference on either of these dynamic EPP paths. The third cpufreq_cpu_get() caller in this file, amd_pstate_verify(), already handles the NULL case. Bring the two new callers in line with that pattern: return NOTIFY_OK from the power-supply notifier (matching the other "nothing to do" exits) and -ENODEV from amd_pstate_profile_set() (the usual cpufreq error for a missing CPU policy). Found by code inspection; not tested on hardware. | ||||
| CVE-2026-92493 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active The crash issue may occur when modprobe amd_pstate_ut on intel platform. amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 20300 Comm: modprobe Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1 Hardware name: FiberHome R2200 V5/Xeon Boards, BIOS 3.1a 02/24/2020 RIP: 0010:amd_pstate_ut_check_perf+0x141/0x280 [amd_pstate_ut] Call Trace: <TASK> amd_pstate_ut_init+0x1b/0xff0 [amd_pstate_ut] ? __pfx_amd_pstate_ut_init+0x10/0x10 [amd_pstate_ut] do_one_initcall+0x42/0x2e0 ? kmalloc_trace+0x26/0x90 do_init_module+0x60/0x240 __se_sys_init_module+0x185/0x1c0 do_syscall_64+0x62/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Add state detection to amd pstate driver to prevent amd_pstate_ut driver from testing on non-AMD platforms. (ML: adjust title) | ||||
| CVE-2026-90315 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers Currently, the legacy I/O and memory sysfs handlers do not check security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and legacy_mem files unprotected when the kernel is locked down. Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") added the check to pci_write_config(), pci_mmap_resource(), and pci_write_resource_io() to prevent userspace from programming DMA-capable hardware that could be used to modify kernel code, but did not cover the legacy handlers. As a result, root can still write arbitrary I/O ports and map the legacy I/O and memory spaces while the kernel is locked down, which is the same capability the lockdown is meant to remove. Add the same check to pci_write_legacy_io(), pci_mmap_legacy_mem(), and pci_mmap_legacy_io(). These generic handlers cover both architectures that define HAVE_PCI_LEGACY (such as Alpha and PowerPC). [bhelgaas: add Link] | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||
| CVE-2026-90370 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config The response TLV loop advanced by tlv->len without a minimum, so a theoretical firmware response containing a zero-length TLV could spin forever, hanging the CPU during device probe. The u32 payload was also read without bounds checking. Reject a short fixed field, stop on a TLV whose length underruns the header or overruns the skb. | ||||
| CVE-2026-90377 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RX data queuing of RRO 3.0 For RRO 3.0, RX data released from a RRO data queue should be put to the indicator queue. The frames are processed and completed in the context of the indicator queue NAPI, which only polls skbs queued on the MT_RXQ_RRO_IND list; frames queued under the data queue id are left sitting on that list until the data queue NAPI happens to run, stalling and reordering RX data. | ||||
| CVE-2026-90382 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length The MPDU length in the rx descriptor comes from the hardware. In monitor mode with the fcsfail filter enabled, the hardware passes up corrupted frames, and a corrupted frame can report a length larger than the received buffer. The bounds check correctly discards such frames, but its WARN_ON_ONCE wrapper means any over-the-air garbage frame taints the kernel, and panics it on the first such frame when panic_on_warn is set. Drop the WARN and discard the frame silently, matching what commit c2d4c8723dbf ("mt76x2: remove some harmless WARN_ONs in tx status and rx path") did for the neighboring rx and tx status paths. Observed immediately on rx with an MT7612U in fcsfail monitor mode on a busy channel. | ||||