Export limit exceeded: 348125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348125 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-46852 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: heaps: Fix off-by-one in CMA heap fault handler Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. | ||||
| CVE-2026-31195 | 2026-05-05 | N/A | ||
| The ping diagnostic handler in /bin/httpd_clientside for ALTICE LABS / SFR France GR140DG and GR140IG fibre CPE/Router/Gateway, inserts unsanitized user input into a system() call, allowing authenticated remote attackers to execute arbitrary commands as root via crafted destAddr parameters using shell command substitution. | ||||
| CVE-2026-43062 | 1 Linux | 1 Linux Kernel | 2026-05-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp() l2cap_ecred_reconf_rsp() casts the incoming data to struct l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes with result at offset 0). This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check. Fix by using the correct type. Also pass the already byte-swapped result variable to BT_DBG instead of the raw __le16 field. | ||||
| CVE-2026-43061 | 1 Linux | 1 Linux Kernel | 2026-05-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized. | ||||
| CVE-2026-43060 | 1 Linux | 1 Linux Kernel | 2026-05-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | ||||
| CVE-2026-43059 | 1 Linux | 1 Linux Kernel | 2026-05-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced mgmt_pending_valid(), which not only validates the pending command but also unlinks it from the pending list if it is valid. This change in semantics requires updates to several completion handlers to avoid list corruption and memory safety issues. This patch addresses two left-over issues from the aforementioned rework: 1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove() is replaced with mgmt_pending_free() in the success path. Since mgmt_pending_valid() already unlinks the command at the beginning of the function, calling mgmt_pending_remove() leads to a double list_del() and subsequent list corruption/kernel panic. 2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error path is removed. Since the current command is already unlinked by mgmt_pending_valid(), this foreach loop would incorrectly target other pending mesh commands, potentially freeing them while they are still being processed concurrently (leading to UAFs). The redundant mgmt_cmd_status() is also simplified to use cmd->opcode directly. | ||||
| CVE-2026-39808 | 1 Fortinet | 3 Fortisandbox, Fortisandbox Paas, Fortisandboxpaas | 2026-05-05 | 9.1 Critical |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.8 may allow attacker to execute unauthorized code or commands via <insert attack vector here> | ||||
| CVE-2024-46871 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX [Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it. | ||||
| CVE-2026-3456 | 2026-05-05 | 7.5 High | ||
| The GeekyBot — Generate AI Content Without Prompt, Chatbot and Lead Generation plugin for WordPress is vulnerable to SQL Injection via the 'attributekey' parameter in versions up to, and including, 1.2.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-31196 | 2026-05-05 | N/A | ||
| The traceroute diagnostic handler in /bin/httpd_clientside for ALTICE LABS / SFR France GR140DG and GR140IG fibre CPE/Router/Gateway, inserts unsanitized user input into a system() call, allowing authenticated remote attackers to execute arbitrary commands as root via crafted destAddr parameters using shell command substitution. | ||||
| CVE-2026-4362 | 2 Roxnor, Wordpress | 2 Elementskit Elementor Addons – Advanced Widgets & Templates Addons For Elementor, Wordpress | 2026-05-05 | 6.5 Medium |
| The ElementsKit Elementor Addons plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `Live_Action::reset()` function in all versions up to, and including, 3.8.2 The function is hooked to the WordPress `init` action and triggers when both `post` and `action=elementor` GET parameters are present, with no authentication or nonce verification. This makes it possible for unauthenticated attackers to overwrite the Elementor content (`_elementor_data`) of any `elementskit_widget` custom post type by visiting a specially crafted URL. The widget's custom designs, text, and configurations are permanently replaced with a blank template. | ||||
| CVE-2025-67796 | 1 Ikus-soft | 1 Rdiffweb | 2026-05-05 | 8.1 High |
| IKUS Rdiffweb before 2.10.5 has an improper authorization flaw that allows an attacker with any valid or stolen access token to act as other users. The API does not enforce binding between the authenticated subject and the targeted user/tenant, so crafted requests can read or modify other users data and, in some cases, perform privileged actions. This issue may enable cross-tenant access. Fixed in version 2.10.6. | ||||
| CVE-2024-46859 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. | ||||
| CVE-2026-7865 | 2026-05-05 | N/A | ||
| A hidden console command is vulnerable to command injection flaw when control characters are passed to its second argument. A third party researcher Eugene Lim had discovered vulnerability in the way console command passes to a popen function call. Attackers with authenticated access to SSH console of Crestron devices may use to run underlying OS commands. | ||||
| CVE-2024-46853 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: nxp-fspi: fix the KASAN report out-of-bounds bug Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ============================================================== ---truncated--- | ||||
| CVE-2026-28263 | 1 Dell | 2 Data Domain Operating System, Powerprotect Data Domain | 2026-05-05 | 5.9 Medium |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain a cross-site Scripting vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Script injection. | ||||
| CVE-2026-30246 | 1 Gofiber | 1 Fiber | 2026-05-05 | 6.5 Medium |
| Fiber is a web framework for Go. In github.com/gofiber/fiber/v3 versions through 3.1.0, the default key generator in the cache middleware uses only the request path and does not include the query string. As a result, requests for the same path with different query parameters can share a cache key and receive the wrong cached response. This can cause response mix-up for query-dependent endpoints and may expose data intended for a different request. This issue is fixed after version 3.1.0. | ||||
| CVE-2026-4304 | 2026-05-05 | 7.5 High | ||
| The WeePie Cookie Allow plugin for WordPress is vulnerable to SQL Injection via the 'consent' parameter in all versions up to, and including, 3.4.11 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-7834 | 2026-05-05 | 9.8 Critical | ||
| A security vulnerability has been detected in EFM ipTIME NAS1dual 1.5.24. This issue affects the function get_csrf_whites of the file /cgi/advanced/misc_main.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-6261 | 2 Muffingroup, Wordpress | 2 Betheme, Wordpress | 2026-05-05 | 8.8 High |
| The Betheme theme for WordPress is vulnerable to Arbitrary File Upload in versions up to, and including, 28.4. This is due to the upload_icons() function workflow moving and unzipping user-controlled ZIP files into a public uploads directory without validating extracted file types. This makes it possible for authenticated attackers, with author-level access and above, to upload arbitrary files (including PHP) and achieve remote code execution via the Icons icon-pack upload flow. | ||||