Export limit exceeded: 362038 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362038 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52972 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000. | ||||
| CVE-2026-52946 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); <Interrupt> lock(&dev->event_lock); *** DEADLOCK *** | ||||
| CVE-2026-53146 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Limit XDomain response copy to actual frame size tb_xdomain_copy() copies req->response_size bytes from the received packet buffer regardless of the actual frame size. When a short response arrives, this reads past the valid frame data in the DMA pool buffer into stale contents from previous transactions. Use the minimum of frame size and expected response size for the copy length. | ||||
| CVE-2026-53266 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). | ||||
| CVE-2026-53253 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: reject short frames before parsing A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) | ||||
| CVE-2026-53309 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness. | ||||
| CVE-2026-53182 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems(). | ||||
| CVE-2026-53202 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast. | ||||
| CVE-2026-53225 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix uninit-value in __sctp_rcv_asconf_lookup() __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. Impact: an unauthenticated SCTP peer makes the receive path read up to 16 bytes of uninitialized memory past a truncated ASCONF address parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). | ||||
| CVE-2026-53130 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed. | ||||
| CVE-2026-53203 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy. | ||||
| CVE-2026-53209 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer. | ||||
| CVE-2026-52929 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. | ||||
| CVE-2026-52954 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ] | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||
| CVE-2026-53046 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine ksmbd_crypt_message() sets a NULL completion callback on AEAD requests and does not handle the -EINPROGRESS return code from async hardware crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns -EINPROGRESS, ksmbd treats it as an error and immediately frees the request while the hardware DMA operation is still in flight. The DMA completion callback then dereferences freed memory, causing a NULL pointer crash: pc : qce_skcipher_done+0x24/0x174 lr : vchan_complete+0x230/0x27c ... el1h_64_irq+0x68/0x6c ksmbd_free_work_struct+0x20/0x118 [ksmbd] ksmbd_exit_file_cache+0x694/0xa4c [ksmbd] Use the standard crypto_wait_req() pattern with crypto_req_done() as the completion callback, matching the approach used by the SMB client in fs/smb/client/smb2ops.c. This properly handles both synchronous engines (immediate return) and async engines (-EINPROGRESS followed by callback notification). | ||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | ||||
| CVE-2026-53068 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/komeda: fix integer overflow in AFBC framebuffer size check The AFBC framebuffer size validation calculates the minimum required buffer size by adding the AFBC payload size to the framebuffer offset. This addition is performed without checking for integer overflow. If the addition oveflows, the size check may incorrectly succed and allow userspace to provide an undersized drm_gem_object, potentially leading to out-of-bounds memory access. Add usage of check_add_overflow() to safely compute the minimum required size and reject the framebuffer if an overflow is detected. This makes the AFBC size validation more robust against malformed. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-53088 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix off-by-one in bcmgenet_put_txcb The write_ptr points to the next open tx_cb. We want to return the tx_cb that gets rewinded, so we must rewind the pointer first then return the tx_cb that it points to. That way the txcb can be correctly cleaned up. | ||||
| CVE-2026-53161 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. | ||||