Export limit exceeded: 100185 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (100185 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90008 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a DMA pool buffer of instance->max_chain_frame_sz bytes, spending one entry per NVMe page of the transfer plus one per page of the buffer for the chain pointer. The loop runs until the transfer is described and never checks the buffer bound. max_hw_sectors comes straight from the MDTS the firmware reports for the drive. On drives with a large MDTS the only thing keeping the list inside the buffer was the block layer default of 1280 KiB, which needs 320 entries, which fit into a 4 KiB frame as that holds 512. But since commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that default is 4 MiB, and such a transfer needs 1025 entries, so the list runs a full page past the end of the frame: sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f BUG: unable to handle page fault for address: ff663bcb81e7c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x1870 [megaraid_sas] If the page after the frame happens to be mapped, the overrun does not fault but silently corrupts the neighbouring pool entry, which is another in-flight command's PRP list. Cap max_hw_sectors at what the chain frame can describe, less one page for transfers that do not start on a page boundary and so need one entry more. This is the megaraid_sas counterpart of commit 04631f55afc5 ("scsi: mpt3sas: Limit NVMe request size to 2 MiB"), but derives the limit from max_chain_frame_sz rather than hardcoding it. | ||||
| CVE-2026-90010 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len to the user response buffer without honoring max_response_len. After a valid sense, the midlayer sets sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller user buffer was overrun. | ||||
| CVE-2026-90017 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takes a frame_len parameter but never actually checks it before indexing into the frame body: const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr); ... c = frame_body[0]; ... a = frame_body[1]; frame_body already points 24 bytes (sizeof(struct ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and frame_body[1] requires frame_len >= 26. A management action frame shorter than that (e.g. exactly 24 bytes, the minimum a malicious peer can send) causes a 1-2 byte out-of-bounds read. This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass attacker/user-influenced frame buffers and lengths straight through. Add the missing length check before frame_body is dereferenced. | ||||
| CVE-2026-90018 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from a wireless management frame. For each candidate attribute it only checks that the fixed 4-byte attribute header (2-byte ID + 2-byte length) fits inside the IE: if (attr_ptr + 4 > wps_ie + wps_ielen) break; u16 attr_id = get_unaligned_be16(attr_ptr); u16 attr_data_len = get_unaligned_be16(attr_ptr + 2); u16 attr_len = attr_data_len + 4; attr_data_len (and therefore attr_len) is read directly from the wire and is never checked against the remaining bytes in the IE before being used as the size of: memcpy(buf_attr, attr_ptr, attr_len); Since attr_len is fully attacker controlled (0 to 65535+4), this is both a heap OOB read of wps_ie, and, more seriously, a stack buffer overflow at several call sites where buf_attr is a single-byte stack variable, e.g. rtw_get_wps_attr_content()'s callers passing WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8 selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c, drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a beacon or probe response processed during scanning can therefore smash the stack of the parsing thread. rtw_get_wps_attr_content() itself has no independent length check and simply trusts the attr_len it gets back from rtw_get_wps_attr(), so fixing the bound here also fixes that caller. The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added by commit 1463ca3ec6601 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which bounded the fixed header but never extended the check to cover the variable-length attribute data that follows it. Add that missing check before attr_len is used as a memcpy() length or accepted as a match. | ||||
| CVE-2026-90022 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly. | ||||
| CVE-2026-90026 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ handler schedules it just before disable_irq(), the work runs after remove() frees the struct via devm. Call cancel_work_sync() after disabling IRQs to close the window. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-92794 | 1 Opensignlabs | 1 Opensign | 2026-09-18 | 7.5 High |
| OpenSign through 2.41.3 fails to validate caller identity in the getDocument cloud function when one-time-password verification is disabled. Attackers can supply a document identifier from guest signing links to retrieve complete document details including all signers' information, sender identity, and valid download tokens without authentication. | ||||
| CVE-2026-90032 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the driver state in pcm->private_data. An open PCM file can outlive USB disconnect because usbtv_audio_free() uses snd_card_free_when_closed(). The disconnect path can then drop the V4L2 device reference and free struct usbtv before ALSA releases the substream, so a later close dereferences freed memory in snd_usbtv_pcm_close(). Take a V4L2 device reference for the ALSA card and drop it from the card private_free callback. This keeps struct usbtv valid until ALSA has closed the remaining files and freed the card. | ||||
| CVE-2026-90041 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths. | ||||
| CVE-2026-92903 | 1 Snowflake | 1 Snowflake Cli | 2026-09-18 | 8.2 High |
| Improper input validation in Snowflake CLI versions prior to 3.27.0 allowed unsanitized user-controlled values to be interpolated into SQL strings that are executed as multi-statement queries. An attacker who is able to supply a malicious project configuration file or craft command-line input can cause Snowflake CLI to execute attacker-controlled SQL statements in the context of the victim's Snowflake session and active role. Successful exploitation requires either write or pull-request access to a project repository whose CI/CD pipeline runs Snowflake CLI under an elevated service account role, or the ability to supply untrusted input to CLI-wrapping automation. Impact is limited by the privileges held by the configured Snowflake role at execution time. The fix is available in Snowflake CLI version 3.27.0, which also addresses several additional security findings. Users must manually upgrade. | ||||
| CVE-2026-81481 | 2026-09-18 | 7.5 High | ||
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Filesystem access for attacker. | ||||
| CVE-2026-92124 | 1 Jenkins Project | 1 Jenkins Script Security Plugin | 2026-09-18 | 8.8 High |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier checks the operations Groovy will perform with the elements it reads from a collection that a sandboxed script casts to another type but performs the cast on the collection itself, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute arbitrary code in the context of the Jenkins controller JVM. | ||||
| CVE-2026-92125 | 1 Jenkins Project | 1 Jenkins Script Security Plugin | 2026-09-18 | 8.8 High |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not reject the @GroovyASTTransformationClass annotation, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to run an arbitrary AST transformation at compile time, bypassing the sandbox protection and executing arbitrary code in the context of the Jenkins controller JVM. | ||||
| CVE-2026-92129 | 1 Jenkins Project | 1 Jenkins Script Security Plugin | 2026-09-18 | 7.5 High |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check calls from sandboxed scripts to methods added dynamically to a class at runtime, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute code outside the sandbox. | ||||
| CVE-2026-92626 | 2026-09-18 | 7.5 High | ||
| Control iD iDSecure versions prior to 4.8.3.0 are affected by an unauthenticated Denial of Service. The /api/dguardintegration/dguardVersion endpoint dereferences DGuard integration login state that may be unset, raising an unhandled null reference exception. The exception is thrown from an asynchronous method that returns void, so it is not observed by a caller and can terminate the iDSecure process. | ||||
| CVE-2026-81474 | 2026-09-18 | 7.8 High | ||
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Heap-based Buffer Overflow vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. | ||||
| CVE-2026-81475 | 2026-09-18 | 8.1 High | ||
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. | ||||
| CVE-2026-86865 | 1 Tanium | 1 Asset | 2026-09-18 | 7.2 High |
| Tanium addressed a SQL injection vulnerability in Asset. | ||||
| CVE-2026-92592 | 1 Craftcms | 2 Cms, Craft Cms | 2026-09-18 | 8.8 High |
| Craft CMS 4.8.0 through 4.18.5 and 5.0.0 through 5.10.12 sign an authenticated user's attacker-controlled license-shun cookie with the same key and format used to validate signed redirect parameters, because the HMAC signature is not bound to its purpose (Yii's cookieValidationKey is derived from the same Craft securityKey used for signed request parameters). An authenticated, non-administrator user (Control Panel access is not required) can set the cookie via the license-shun endpoint and transplant the signed envelope into the redirect parameter; on a successful login, Craft validates the signature and renders the authenticated bytes as an unsandboxed Twig template, where Twig's map filter accepts a string callback and allows PHP system() to execute arbitrary operating-system commands as the web-server user. Exploitation requires an account using password authentication without active 2FA, the default request configuration, and availability of PHP system(). The issue is fixed in 4.18.6 and 5.10.13. | ||||
| CVE-2026-92599 | 1 Hapijs | 1 Joi | 2026-09-18 | 7.5 High |
| joi (npm package `joi`, hapi.js) versions >=17.2.0 <17.13.7 and >=18.0.0 <18.2.6 are vulnerable to regular expression denial of service in the `Joi.string().isoDate()` validation rule. One of the regular expressions the rule applies to the input is unanchored, so a valid ISO date followed by a long run of fractional-second digits causes the regex engine to restart its search from every position in the string, yielding time proportional to the square of the input length (about 1.4 s for 64 KB of digits and about 22 s for 256 KB). A remote attacker who can supply a string to an isoDate validation can stall the application with a single request. Fixed in 17.13.7 and 18.2.6; as a workaround, cap the length of the string before it reaches joi. | ||||