Export limit exceeded: 390764 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390764 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89463 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: ucs1002: fix use-after-free on remove ucs1002 has no remove callback, so unbind runs entirely through devm. The alert IRQ handler queues the health_poll delayed work, and the work reschedules itself while the chip reports a bad-health condition. devm frees the alert IRQ, which only synchronizes the handler; it does not cancel the delayed work, which can then run after devm frees the driver data and dereference it. Register health_poll with devm_delayed_work_autocancel() before the alert IRQ is requested. devm then frees the IRQ before cancelling the work, so the handler can no longer queue it and the work is cancelled before the driver data is freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89462 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: propagate register read errors max17040_get_vcell() and max17040_get_soc() ignore errors returned by regmap_read(). When an I2C transfer fails, the uninitialized register value is converted and reported to userspace as a valid voltage or state of charge. The polling worker can also replace the cached state of charge with the bogus value and emit a spurious change event. Propagate read errors through the power supply get_property callback and keep the last valid cached state of charge when polling fails. | ||||
| CVE-2026-89461 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: synchronize work cancellation on suspend max17040_work() requeues itself after every poll. cancel_delayed_work() only cancels a pending instance and does not wait for a callback that is already running. If system suspend races with the polling callback, the callback can continue accessing the fuel gauge and requeue itself after the suspend callback returns. Use cancel_delayed_work_sync() to ensure polling is quiesced before suspend completes. | ||||
| CVE-2026-89460 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks The command 'perf stat -e cycles -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the allocation of struct cpu_cf_events at first event initialization. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online create an event for CPUs 0,2-X. Since the events are created with task-context, the scheduler will eventually schedule the program on CPU1. This CPU has not created and initialized any per CPU event infrastructure as that CPU was not online at the time of the perf invocation. Thus when the scheduler runs stress-ng on CPU1, the function cpumf_pmu_add() refers to a NULL pointer: struct cpu_cf_events *cpuhw = this_cpu_cfhw(); This function call is invoked after the task stress-ng has been made runnable on CPU1. And this_cpu_cfhw() returns NULL. The result is a panic: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 .... Krnl PSW : 0404d00180000000 000003ef8291fd0c (cpumf_pmu_add+0x3c/0x80) .... Call Trace: [<000003ef8291fd0c>] cpumf_pmu_add+0x3c/0x80 [<000003ef82bb5e3e>] event_sched_in+0xae/0x190 [<000003ef82bb60d6>] merge_sched_in+0x1b6/0x390 [<000003ef82bb65b8>] visit_groups_merge.constprop.0.isra.0+0x308/0x5b0 [<000003ef82bb689a>] pmu_groups_sched_in+0x3a/0x50 [<000003ef82bb6a30>] ctx_sched_in+0x180/0x260 [<000003ef82bb780c>] perf_event_context_sched_in+0x11c/0x2d0 [<000003ef82bb79ee>] __perf_event_task_sched_in+0x2e/0xc0 [<000003ef82994834>] finish_task_switch.isra.0+0x1a4/0x250 .... Last Breaking-Event-Address: [<000003ef8291f1d8>] this_cpu_cfhw+0x38/0x40 The issue arises only in per-task context when the CPUMF facility is used and the scheduler picks a random CPU for such a process to run on. The scheduler enables the CPUMF infrastructure via PMU callback functions pmu::add() and pmu::del(). Introduce a CPU hotplug prepare/dead callback pair which creates and removes the per CPU counter data while the CPU is offline. Count the users which track every CPU (cpu == -1), that is perf_event_open() events with task context and /dev/hwctr device sessions, in the new counter cpu_cf_root::tskcnt, protected by pmc_reserve_mutex. This ensures the infrastructure is available when new CPU is selected to run the per-task context process. In cpum_cf_free_root() and cpum_cf_free_cpu() ensure the reference pointer to data structures is set to NULL before the data is freed to prevent interrupt handlers to access stale data. [gor@linux.ibm.com: change commit message] | ||||
| CVE-2026-89458 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Do not complete a failed ESE read as successful dasd_int_handler() completes an NRF read of an unallocated ESE track by calling ese_read() and unconditionally marking the request DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has zeroed the destination buffer: a failed sense-data parse or a current track outside the requested range both return early, leaving the destination pages untouched. The request is still completed successfully, so the block layer is handed stale / uninitialized memory instead of zeros. Check the ese_read() return value and fail the request through the normal error path instead of forcing DASD_CQR_SUCCESS. | ||||
| CVE-2026-89457 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Guard sysfs discipline callbacks against unallocated private data Several sysfs show/store handlers call a discipline callback that dereferences device->private, either directly or through the DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline is assigned before check_device() allocates device->private, so an unprivileged read of one of these world-readable attributes in that window dereferences a NULL pointer and panics. Guard the dereference inside each callback that actually touches device->private. | ||||
| CVE-2026-89455 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() removes pcie->event_domain via irq_domain_remove(), but the per-event IRQs mapped from that domain are requested with devm_request_irq() in plda_init_interrupts(). The actual free_irq() for a devm-managed IRQ is deferred by devres until after the calling probe()/remove() function returns. This means irq_domain_remove() can free the domain's internal data before the deferred free_irq() for IRQs still mapped into it has run. When devres later processes that deferred cleanup, it can end up dereferencing the already-freed domain. Free each event IRQ explicitly with devm_free_irq() before removing the domain. This triggers the free immediately and removes the IRQ from the devres tracking list, so devres will not attempt to free it a second time later. Also dispose of the event, INTx, and MSI IRQ mappings with irq_dispose_mapping() before their owning domains are removed. Finally, guard the calls to irq_set_chained_handler_and_data() for pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when those fields hold a valid (>0) IRQ number. This is a pre-existing issue, flagged by automated review during work on an earlier, unrelated patch to this driver. Build-tested and boot-tested on StarFive VisionFive v1.2A board | ||||
| CVE-2026-89454 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts() plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but does not unwind them when later step fails. If platform_get_irq() or either irq_create_mapping() fails in plda_init_interrupts(), the domains are never deinitialized. If irq_create_mapping() fails, port->intx_irq stays initialized. Hence, remove the IRQ domains in the error path by calling plda_pcie_irq_domain_deinit(). Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and msi_irq mappings itself before removing their domains, the msi_irq mapping failure path can go directly to err_irq_domain_deinit instead of disposing of port->intx_irq separately first. This issue was found by automated review of sashiko-bot [mani: commit log] | ||||
| CVE-2026-89453 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Put PCI device after handling PPR faults iommu_call_iopf_notifier() looks up the requester with pci_get_domain_bus_and_slot(), which returns a PCI device with its reference count incremented. Neither the successful iommu_report_device_fault() path nor the abort path drops that reference, so every handled PPR request leaks a PCI device reference. This is the same ownership rule that was fixed for the old iommu_v2 ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was added later as a separate PPR/IOPF notifier path. Drop the PCI device reference after handling the PPR entry. | ||||
| CVE-2026-89451 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() installs the new SVA attach handle in the group PASID lookup before iommu_sva_bind_device() returns. A concurrent bind can therefore find and reuse the same handle after iommu_sva_lock is dropped. handle->dev was initialized after dropping iommu_sva_lock. This leaves a window where a racing bind can return a handle whose dev pointer is still NULL. A subsequent iommu_sva_unbind_device() can then dereference it via handle->dev->iommu_group. Initialize handle->dev before releasing iommu_sva_lock so any visible SVA handle is fully initialized. | ||||
| CVE-2026-89449 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add iommu_mock_device_add() first calls iommu_fwspec_init(), which on success allocates both dev->iommu (via dev_iommu_get()) and dev->iommu->fwspec. If the subsequent device_add(dev) call fails, the error path only calls iommu_fwspec_free(dev), which frees fwspec but leaves dev->iommu still allocated. This triggers the following kmemleak report when fuzzing with Syzkaller: BUG: memory leak unreferenced object 0xffff888011e0a200 (size 192): comm "syz.1.1695", pid 24885, jiffies 4295222527 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ backtrace (crc 25df5bb3): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4575 [inline] slab_alloc_node mm/slub.c:4899 [inline] __kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408 iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087 iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385 mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline] iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline] iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072 iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev) in the device_add() failure path. dev_iommu_free() frees both fwspec and the outer dev_iommu struct and clears dev->iommu. | ||||
| CVE-2026-89447 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Avoid locking internal accesses during unmap iommufd_access_notify_unmap() skips internal accesses because they do not have an external unmap callback to invoke. However, the current test calls iommufd_lock_obj() before checking whether the access is internal. If iommufd_lock_obj() succeeds, the loop then sees the internal access and continues, bypassing the matching iommufd_put_object() used by the normal unmap path. This leaks the object reference taken by iommufd_lock_obj(). Check for internal accesses first so skipped entries are never locked. | ||||
| CVE-2026-89446 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes an object reference and the iova_rwsem write lock before storing the IOAS in the temporary ioas_list xarray. If xa_store() fails, the current IOAS has not been inserted into ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS objects already present in that xarray, so it cannot release the current IOAS. Release the current IOAS rwsem and object reference before unwinding the previously stored entries. | ||||
| CVE-2026-89444 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() populates the security area of the BIOS attribute request buffer with the current admin password via populate_security_buffer(), then dumps the whole request buffer with print_hex_dump_bytes(). This can expose the plaintext admin password in the kernel log. The same issue was fixed for the password attribute path by commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data"). Remove the remaining dump from the BIOS attribute path. | ||||
| CVE-2026-89439 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Add a NULL check for sst_inst[] To be consistent with other places, add a NULL check for failed socket loading by checking isst_common.sst_inst[]. | ||||
| CVE-2026-89438 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate logical CPU id and clos id Validate max CLOS ID and logical CPU ID for core power feature. Reject any clos level or logical CPU number greater than the supported maximum. These are used to calculate MMIO offset. | ||||
| CVE-2026-89437 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int1092: Fix potential memory leak in sar_probe() The memory allocated for device_mode_info in parse_package() called by sar_get_data() is not freed in some of the error paths in sar_probe(). Fix that by converting to use device managed allocations. | ||||
| CVE-2026-89332 | 1 Aws | 1 Kiro Ide | 2026-09-11 | 5.5 Medium |
| Inclusion of functionality from an untrusted control sphere in the Kiro Powers feature in Amazon Kiro IDE before version 0.8.135 might allow remote unauthenticated actors to obtain sensitive information from a developer workstation. Crafted repository content can cause the agent to modify the workspace settings file, which redirects the Kiro Powers registry request to an actor controlled endpoint and sends workspace data to that endpoint when the Powers panel is opened. To remediate this issue, users should upgrade to Kiro IDE version 0.8.135 or later. Users who opened a project in an earlier version should also rotate any credentials that were present in that project. | ||||
| CVE-2026-89256 | 1 Wwbn | 1 Avideo | 2026-09-11 | 8.7 High |
| AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in the Bookmark plugin where chapter names are not encoded before being concatenated into public watch-page HTML. A video owner can inject malicious scripts via the bookmark name parameter, and every visitor of that video executes the payload in the AVideo origin. | ||||
| CVE-2026-89241 | 1 Wwbn | 1 Avideo | 2026-09-11 | 6.1 Medium |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a reflected cross-site scripting vulnerability in confirmLivePassword.php that copies REQUEST_URI into a form action attribute without encoding. Attackers can craft a malicious URL with a quote character to break out of the action attribute and inject event handlers that execute in the victim's browser within the site origin. | ||||