Export limit exceeded: 397872 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397872 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98114 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated. | ||||
| CVE-2026-98113 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | ||||
| CVE-2026-98112 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-98109 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. | ||||
| CVE-2026-98108 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle. | ||||
| CVE-2026-98107 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle. | ||||
| CVE-2026-98106 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated--- | ||||
| CVE-2026-98105 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0. | ||||
| CVE-2026-98104 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables. | ||||
| CVE-2026-98103 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: igmp: convert struct ip_sf_list to RCU Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu") added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a use-after-free while iterating im->sources during concurrent deletions. However, ip_check_mc_rcu() is called from RCU read-side critical sections in packet receive and route lookup fast paths (e.g. __mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()). When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(), an XFRM policy matching a multicast destination triggers xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() -> ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock is already held on the same CPU, triggering a lockdep recursive locking warning / deadlock. Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the IPv6 implementation in net/ipv6/mcast.c: 1. Add struct rcu_head to struct ip_sf_list and annotate sf_next, sources, and tomb as __rcu pointers. 2. Use rcu_assign_pointer() and kfree_rcu() for list updates and deletions. 3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse im->sources locklessly with for_each_psf_rcu(), reading and writing counter fields with READ_ONCE() and WRITE_ONCE(). Note: RCU conversion of /proc/net/mcfilter will be done in a separate patch. | ||||
| CVE-2026-98102 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whose count reaches zero, ip6_mc_del1_src() unlinks psf from pmc->mca_sources. If the filter was previously active, the code moved psf directly into pmc->mca_tomb by updating psf->sf_next. Because pmc->mca_sources is traversed locklessly under RCU (e.g. by ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period elapses diverts concurrent readers to the tombstone list. Consequently, readers miss remaining active sources in pmc->mca_sources and improperly examine deleted tombstone entries. Fix this by allocating a new tombstone node for pmc->mca_tomb (as done in sf_setstate()) and retiring the original psf via kfree_rcu(). | ||||
| CVE-2026-98101 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro. | ||||
| CVE-2026-93247 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference 'uuid_count' member of struct 'discovery_state' is assigned and read without any locks, so there is a chance of situation when uuid_count != 0, but uuids is NULL and there will be NULL pointer dereference. Possible race: 'hci_update_passive_scan_sync' 'hci_discovery_filter_clear' hdev->discovery.uuid_count = 0; <----------------------preempted-----------------------------> 'start_service_discovery' // Set uuid_count to value != 0 hdev->discovery.uuid_count = uuid_count; hdev->discovery.uuids = kmemdup(...); <----------------------preempted-----------------------------> spin_lock(&hdev->discovery.lock); kfree(hdev->discovery.uuids); hdev->discovery.uuids = NULL; spin_unlock(&hdev->discovery.lock); Now uuids == NULL and uuid_count != 0. So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives non consistent discovery state, where NULL dereference of uuids happens. To fix it let's add discovery.lock around every read/write of uuid_count, uuids pair of struct members. It is also important to assign uuid_count value only after success kmemdup() allocation in start_service_discovery(), otherwise uuids is NULL, because kmemdup failed, but uuid_count is already assigned to non zero value. The following panic happens: [ ] ------------[ cut here ]------------ [ ] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ ] CPU: 0 PID: 15056 Comm: kworker/u9:2 [ ] Workqueue: hci0 hci_rx_work [ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ ] pc : eir_has_uuids+0x2d8/0x590 [ ] lr : is_filter_match+0x258/0x320 ... [ ] Call trace: [ ] eir_has_uuids+0x2d8/0x590 [ ] is_filter_match+0x258/0x320 [ ] mgmt_device_found+0x5b0/0xafc [ ] process_adv_report.part.0+0x8c8/0xf14 [ ] hci_le_adv_report_evt+0x338/0x3f0 [ ] hci_le_meta_evt+0x1f0/0x4c8 [ ] hci_event_packet+0x440/0xc9c [ ] hci_rx_work+0x44c/0xaf8 [ ] process_one_work+0x54c/0x103c [ ] worker_thread+0x6c4/0x10c4 [ ] kthread+0x274/0x2ec [ ] ret_from_fork+0x10/0x20 [ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024) [ ] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-93248 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: don't WARN on kernel job timeout when device already wedged igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2 (UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind, a GSC proxy kernel submission can still time out; with the device wedged and the GuC CT stopped it can never complete, so its kernel job times out. Tile0: GT1: Kernel-submitted job timed out WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:... at guc_exec_queue_timedout_job() Workqueue: gt-ordered-wq drm_sched_job_timedout Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even though the device is already wedged. The timeout handler then treats the kernel queue timeout as unexpected and taints the kernel. Honour an already-wedged device even for killed queues so the expected teardown timeout no longer trips the WARN. (cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) | ||||
| CVE-2026-93249 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic-spisg: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. aml_spisg_clk_init() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-93250 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_flush() vxlan_mdb_flush() iterates over the MDB entries using hlist_for_each_entry_safe(), which only tolerates the removal of the current entry. Contrary to the comment above the loop, the removal of an entry can trigger the removal of another entry. Flushing the remotes of a (*, G) entry also removes the (S, G) entries that were created for its source list, once they are left without remotes: vxlan_mdb_remotes_flush() -> vxlan_mdb_remote_del() -> vxlan_mdb_remote_srcs_del() -> vxlan_mdb_remote_src_del() -> vxlan_mdb_remote_src_fwd_del() -> __vxlan_mdb_del() -> vxlan_mdb_entry_put() Such an entry can be located after the (*, G) entry in the list, as vxlan_mdb_entry_get() returns an existing entry without moving it to the head of the list. This order is obtained by adding the (S, G) entry before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition of the source otherwise fails with -EEXIST. The (S, G) entry is then the entry saved by hlist_for_each_entry_safe() and it is freed while the (*, G) entry is processed. The next iteration calls hlist_del() on it again, writing LIST_POISON1 to LIST_POISON2 [1]. Besides device deletion, the flush is also reachable from RTM_DELMDB with NLM_F_BULK. Fix by re-reading the next entry after the remotes were flushed. The current entry cannot be removed by this flush, as source lists can only be configured on (*, G) entries and the removed entries are (S, G) entries. It is therefore still linked and its next pointer reflects the removals. [1] BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588 Write of size 8 at addr dead000000000122 by task ip/327 CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT Call trace: vxlan_mdb_entry_put.part.0+0x328/0x588 vxlan_mdb_flush+0x1d8/0x25c vxlan_mdb_fini+0x8c/0x100 vxlan_uninit+0x1c/0x7c unregister_netdevice_many_notify+0x954/0xd4c rtnl_dellink+0x210/0x530 rtnetlink_rcv_msg+0x434/0x4d0 netlink_rcv_skb+0xc4/0x204 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x548 netlink_sendmsg+0x29c/0x560 ____sys_sendmsg+0x390/0x3ec ___sys_sendmsg+0x114/0x188 __sys_sendmsg+0xf0/0x178 __arm64_sys_sendmsg+0x48/0x60 invoke_syscall.constprop.0+0x58/0x180 el0_svc_common.constprop.0+0x74/0x140 do_el0_svc+0x30/0x40 el0_svc+0x38/0x98 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c | ||||
| CVE-2026-93252 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix circular locking dependency in ocfs2_init_acl() A lockdep warning indicates a circular locking dependency between `&oi->ip_xattr_sem` and `&journal->j_trans_barrier`: WARNING: possible circular locking dependency detected is trying to acquire lock: (&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0 fs/ocfs2/acl.c:367 but task is already holding lock: (&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700 fs/ocfs2/journal.c:369 The deadlock involves two code paths: Path 1 (setxattr) where `ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a transaction, which acquires `j_trans_barrier` (read); and Path 2 (mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier` read) and then calls `ocfs2_init_acl()`, which attempts to acquire `ip_xattr_sem` (read) on the parent directory to retrieve the default ACL. Because rw_semaphores are subject to writer priority, a pending writer on `j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to block, while Path 2 is blocked waiting for Path 1 to release `ip_xattr_sem`. The patch fixes the lock ordering by precomputing the ACL state before starting the OCFS2 transaction, while preserving POSIX ACL storage semantics and the existing inode/security initialization order. By reading the parent directory's default ACL and preparing the new inode's ACLs outside the transaction, `ip_xattr_sem` is always acquired before `j_trans_barrier`. `struct ocfs2_acl_state` encapsulates the prepared ACL state, while `ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`. `ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed state, removing internal `ip_xattr_sem` acquisition and redundant disk reads. Additionally, remove the `ip_xattr_sem` acquisition from `ocfs2_xattr_set_handle()`. This function is only used while initializing a new inode that has not yet been inserted into the inode hash or attached to a dentry, meaning there is no risk of concurrent access and the lock is unnecessary. | ||||
| CVE-2026-93253 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/isolation: Defer freeing of cpumask memblock memory to initcall When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock: warn when freeing reserved memory before memory map is initialized"), the following warning was hit when there was a "nohz_full" kernel boot parameter. Cannot free reserved memory because of deferred initialization of the memory map WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0 : Call Trace: <TASK> memblock_phys_free+0xcb/0x100 housekeeping_init+0x14c/0x170 start_kernel+0x207/0x450 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0xda/0xe0 common_startup_64+0x13e/0x141 </TASK> IOW, we shouldn't free memblock allocated memory so early in the boot process when memory map isn't fully initialized in deferred_init_memmap(). Fix it by saving the housekeeping cpumask memblock memory to be freed into a llist free list in housekeeping_init() and add a new housekeeping_late_init() helper to defer the actual freeing of memblock memory to when initcall's are being processed. The cpumask memblock memory is treated as a llist_node with the size of a "long" type which is also smallest cpumask size that can be allocated. The non-atomic version of the llist APIs are used as there is no contention. This commit depends on the presence of commit 7c2eee9c1367 ("memblock: don't touch memblock arrays when memblock_free() is called late") to prevent a KASAN UAF bug report [1]. [1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/ | ||||