Export limit exceeded: 393417 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393417 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89949 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: avoid unaligned fault in IP extraction Independent of the alignment of the ARP packet in the SKB, either the batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access (on HW without native unaligned read support). Use get_unaligned() to handle this properly on all architectures. | ||||
| CVE-2026-89948 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix freeing of claims on meshif deletion When the mesh interface is getting deleted, then batadv_bla_del_backbone_claims() (via batadv_bla_purge_backbone_gw()) could make sure that all claims gets removed. But this function is only executed when bat_priv->bla.claim_hash is not NULL. And since batadv_bla_free() is always setting it to NULL before it is (indirectly) called, it was never actually executed. But the batadv_bla_purge_claims() -> batadv_handle_unclaim() is at the moment too fragile because the BLA code is not handling the rehashing in batadv_bla_update_orig_address(). The stored backbone address doesn't have to be the one actually used for the hash bucket selection during the initial adding of the backbone. The batadv_handle_unclaim() can therefore fail to find the respective backbone for the unclaim and then stop the deletion. But the actual backbone_gw object is not needed for the unclaim because all relevant information is always provided by the caller. And the check for the existence of the backbone_gw doesn't provide any additional security check for the deletion of a claim. | ||||
| CVE-2026-89947 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: meson: align gxbb_32k_clk_sel number of parents with actual count The following out-of-bounds read has been observed by Christian on a GXBB WeTek Hub: ================================================================== BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418 Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT Hardware name: WeTek Hub (DT) Call trace: show_stack+0x14/0x20 (C) dump_stack_lvl+0x74/0x94 print_report+0x164/0x4b0 kasan_report+0x98/0xd8 __asan_report_load8_noabort+0x1c/0x24 __clk_register+0x1b70/0x2418 devm_clk_hw_register+0x74/0x15c meson_clkc_init+0xd4/0x20c meson_clkc_syscon_probe+0x5c/0x94 platform_probe+0xbc/0x17c really_probe+0x184/0x844 __driver_probe_device+0x154/0x35c driver_probe_device+0x60/0x188 __driver_attach+0x168/0x4a0 bus_for_each_dev+0xec/0x180 driver_attach+0x38/0x58 bus_add_driver+0x238/0x4c0 driver_register+0x150/0x388 __platform_driver_register+0x54/0x7c gxbb_clkc_driver_init+0x18/0x20 do_one_initcall+0xb8/0x340 kernel_init_freeable+0x49c/0x52c kernel_init+0x24/0x148 ret_from_fork+0x10/0x20 The buggy address belongs to the variable: gxbb_32k_clk_parents+0x60/0x400 The buggy address belongs to a vmalloc virtual mapping The buggy address belongs to the physical page: Memory state around the buggy address: ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9 >ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 ^ ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9 ================================================================== Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel mux but didn't adjust the hard-coded num_parents field. Fix the actual number of parents of that mux by using ARRAY_SIZE instead (avoiding similar problems in future). | ||||
| CVE-2026-89946 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l33: drain threaded IRQ before runtime suspend cs35l33_runtime_suspend() currently switches the codec into regcache_cache_only(true) and powers it down without first quiescing the threaded IRQ registered by devm_request_threaded_irq(). That leaves a window where cs35l33_irq_thread() can still run after suspend has closed off live register access. A running system can reach this during runtime PM while the driver still has critical fault IRQs unmasked. If the threaded handler runs in that window, it reads volatile INT_STATUS_1/2 after cache_only has been enabled, ignores the regmap_read() failures, and can still drive the AMP_SHORT_RLS, CAL_ERR_RLS, OTE_RLS, and OTW_RLS release paths. Use disable_irq() before entering cache_only/power-off so any in-flight threaded handler is drained and no new IRQ thread can run during the suspended state. Re-enable the IRQ only after runtime_resume() has restored live register access with regcache_sync(). Since probe only warns if devm_request_threaded_irq() fails, track whether the IRQ was actually installed before disabling or re-enabling it. | ||||
| CVE-2026-89945 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l34: drain threaded IRQ before runtime suspend cs35l34_runtime_suspend() currently switches the codec into regcache_cache_only(true), asserts reset low, and powers the device off without first quiescing the threaded IRQ registered by devm_request_threaded_irq(). That leaves a window where cs35l34_irq_thread() can still run after suspend has removed live hardware access. A running system can reach this during runtime PM while the driver still has critical fault IRQs unmasked. If the threaded handler runs in that window, it reads volatile INT_STATUS_1..4 after cache_only has been enabled, ignores the regmap_read() failures, and can still execute the PROT_RELEASE_CTL release sequence or the BST fault power-down writes. Use disable_irq() before entering cache_only/reset-low/power-off so any in-flight threaded handler is drained and no new IRQ thread can run while the device is suspended. Re-enable the IRQ only after runtime_resume() has restored live register access with regcache_sync(). Since probe only logs request_threaded_irq() failures and keeps going, track whether the IRQ was actually installed before disabling or re-enabling it. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89943 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: loongson: Fix error handling in ACPI property parsing In loongson_card_parse_acpi(), the return value of device_property_read_string() for the `codec-dai-name` property was ignored. If the property is missing or invalid, an uninitialized pointer would be used later, potentially leading to undefined behavior. Fix this by checking the return value and propagating the error appropriately. | ||||
| CVE-2026-89942 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix potential use-after-free in anonymous buffer release An anonymous buffer handle holds a reference to the underlying IIO device. The reference is dropped in the buffer handle's release function. If the device has been removed, either through unbind or hot-unplug, the buffer handle might hold the last reference. The release function takes the mutex for the buffer using a guard, which means the unlock happens after all the code in the function, including `iio_device_put()`. If the anonymous buffer holds the last reference this might free both the IIO device and the buffer, which contains the mutex, leading to use-after-free when the mutex is unlocked. Fix this by using a scoped guard just around the buffer dmabuf list access, making sure the mutex is unlocked before releasing the IIO device. Version 10 of the patch that introduced this issue used this exact scheme of first unlocking and then dropping the reference [1]. During review it was suggested to use a guard instead, and version 11 made that change [2]. | ||||
| CVE-2026-89941 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Make IIO DMA fence release RCU-safe The `dma_fence` documentation states that if a custom release implementation is provided, the `dma_fence` object must be freed in an RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`, which might result in a use-after-free. Remove the custom `release` implementation. This makes the DMA fence core fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence. This requires that the fence be the first member of `struct iio_dma_fence`. Using the default release method for extended DMA fence structures is a common pattern. | ||||
| CVE-2026-89940 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Tie IIO dma fence lock lifetime to the fence The `iio_dma_fence` implementation currently uses a lock embedded in the `iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the `iio_dmabuf_priv`, which can cause a use-after-free. Tie the lifetime of the lock to the lifetime of the fence by embedding them in the same struct. We can't just hold a reference to the `iio_dmabuf_priv` from the `iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the fence release callback is not allowed to sleep. Note that the `dma_fence` framework now has an internal lock that gets used when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to allow this patch to be backportable use an external lock. | ||||
| CVE-2026-89939 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable atlas_buffer_postenable() acquires a runtime PM reference with pm_runtime_resume_and_get() but returns the result of atlas_set_interrupt() directly. If atlas_set_interrupt() fails, the runtime PM reference is leaked and the device can never autosuspend. Add pm_runtime_put_autosuspend() on the error path to balance the reference. | ||||
| CVE-2026-89938 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF The atlas driver requests its hardware data-ready IRQ with devm_request_threaded_irq(); its threaded handler queues an irq_work, atlas_work_handler(), that calls iio_trigger_poll(data->trig). The IRQ is devm-managed, so free_irq() runs from the devres unwind after atlas_remove() returns without flushing that irq_work. Once a buffer is enabled, conversion-complete IRQs keep firing and queueing it; a pending irq_work can therefore run after the unwind has freed atlas_data/indio_dev and the trigger, when atlas_work_handler() derives the atlas_data pointer via container_of() and dereferences data->trig, a use-after-free. Call iio_trigger_poll_nested() directly from the threaded handler instead of bouncing through irq_work. free_irq() then drains the threaded handler, closing the window; other iio drivers with a threaded data-ready IRQ do the same (e.g. bmi270). This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89937 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and return an error pointer, but sgp_probe() stores it and returns success, so the device is registered without its IAQ thread and sgp_remove() later passes the error pointer to kthread_stop(). Return the error from probe instead. | ||||
| CVE-2026-89936 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: m62332: Fix regulator reference count imbalance m62332_set_value() enables the Vcc regulator on every write of a non-zero value and disables it on every write of zero, without tracking the channel's current state. Because the regulator is reference counted, changing a channel directly from one non-zero value to another enables it more than once, while a later write of zero disables it only once. The reference count never returns to zero and the regulator is left enabled indefinitely. Only enable the regulator on the transition from zero to non-zero, and only disable it on the transition from non-zero to zero, using the previously stored channel value to detect the edge. Balance the regulator on the I2C error path so the reference count stays consistent if the write fails. | ||||
| CVE-2026-89935 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: apds9306: fix PM reference leak in apds9306_read_data() apds9306_read_data() calls pm_runtime_resume_and_get() but several error paths return directly without calling pm_runtime_put_autosuspend(), leaking the runtime PM reference and preventing the device from autosuspending. Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() and PM_RUNTIME_ACQUIRE_ERR() to automatically handle runtime PM reference release on all return paths. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89933 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: dps310: fix NULL pointer dereference on ACPI probe When the device is enumerated through its ACPI HID (IFX3100), i2c_client_get_device_id() returns NULL: the ACPI-derived client name does not match the driver's i2c_device_id table. dps310_probe() then dereferences that NULL pointer in "iio->name = id->name" and crashes the kernel during probe. The IIO device name is always "dps310", so set it directly and drop the now-unused device-id lookup. | ||||
| CVE-2026-89932 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU. | ||||
| CVE-2026-89931 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a nested VM-Exit to ensure the request is cleared, even when KVM was built with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM manages to bail from VM-Enter without processing the request, and then emulates VMLAUNCH or VMRESUME. | ||||
| CVE-2026-89930 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Service local TLB flushes on failed nested VM-Enter KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architecturally require a TLB flush, the TLBs are updated so that, after VM entry, the logical processor will not use any translations that were cached before the transition. The SDM is unclear about when the TLB flush should occur, and whether or not a failed VM entry would flush the TLB, so it is safer to always do the TLB flush in this case. More concretely, KVM also updates the last VPID L1 used for L2 in nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry ultimately fails. With the current code, KVM could miss a TLB flush if L1 changes L2's VPID, then does a failed VM entry followed by a successful one, as the failed VM entry would update last_vpid but not actually flush the TLB. Servicing local TLB flushes on failed VM entries makes sure that the TLB is always flushed when last_vpid is updated. | ||||