Export limit exceeded: 378697 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378697 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-74425 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: handle CB.InitCallBackState3 requests without a server record The cache manager callback path now attaches the server record to an incoming call through the rxrpc peer's app data. That association is not guaranteed to exist for every callback request, and most callback handlers already tolerate that case. Make CB.InitCallBackState3 follow the same pattern by checking whether a server record was attached before using it. If the peer is not mapped to a server record, trace the request and ignore it, matching the existing behaviour for other unmatched callback requests. This keeps the callback handler consistent with the rest of the cache manager service and avoids depending on peer state that may not be available for a given request. | ||||
| CVE-2026-74431 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue. | ||||
| CVE-2026-74436 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx->backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog. | ||||
| CVE-2026-74465 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | ||||
| CVE-2026-17482 | 1 Ibm | 1 Documentation Offline | 2026-08-17 | 9.8 Critical |
| IBM Documentation Offline 1.0.0 through 1.4.1 could allow a remote attacker to execute arbitrary code due to improper control of file paths. | ||||
| CVE-2026-17481 | 1 Ibm | 1 Documentation Offline | 2026-08-17 | 8.8 High |
| IBM Documentation Offline 1.0.0 through 1.4.1 could allow a remote attacker to execute arbitrary code due to improper output neutralization for logs. | ||||
| CVE-2026-72487 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already pointed to the ROM space end, invoking readl() would read 4 bytes therefore cause an out-of-bounds access and trigger a crash. Fix this by adding image header and data structure checking. We also found another crash on arm64 machine: Unable to handle kernel paging request at virtual address ffff8000dd1393ff Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault The call trace is the same with x86_64, but the crash reason is that the data structure addr is not aligned with 4, and arm64 machine report "alignment fault". Fix this by adding alignment checking. [bhelgaas: shorten function names, wrap comments] | ||||
| CVE-2026-19557 | 2 Apple, Google | 2 Macos, Chrome | 2026-08-17 | 8.3 High |
| Use after free in TabStrip in Google Chrome on Mac prior to 151.0.7922.137 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-74900 | 2026-08-17 | 9.8 Critical | ||
| openssl_encrypt versions before 1.4.0 contain a critical vulnerability in pqc.py where KEM decapsulation failures silently fall back to simulation mode, generating a deterministic shared secret from only 16 bytes of the private key and publicly available encapsulated key data. Attackers who obtain 16 bytes of the private key can compute the shared secret and decrypt all ciphertext, as the fallback triggers on any KEM failure without raising an error. | ||||
| CVE-2026-74893 | 2026-08-17 | 8.8 High | ||
| openssl_encrypt versions before 1.4.0 contain hardcoded default JWT signing secrets in config.py that pass validation checks. Attackers with access to source code can forge valid JWT tokens for any client_id to gain authenticated access to keyserver and telemetry APIs. | ||||
| CVE-2026-74888 | 2026-08-17 | 7.5 High | ||
| openssl_encrypt versions before 1.4.0 use a non-standard PBKDF2 key derivation construction with iterations=1 per call in an outer loop, creating a KDF whose security properties have not been formally analyzed. Attackers can exploit this weakened key derivation to more efficiently crack passwords protecting legacy encrypted files compared to standard PBKDF2 implementations. | ||||
| CVE-2026-74883 | 2026-08-17 | 8.8 High | ||
| openssl_encrypt versions before 1.4.0 contain a sandbox bypass vulnerability where the plugin sandbox fails to restrict alternative file access methods like pathlib.Path and io.open. Attackers can import pathlib or io modules to read and write arbitrary files, completely bypassing the restricted_open file access controls. | ||||
| CVE-2026-73635 | 1 Apache | 1 Struts | 2026-08-17 | 7.5 High |
| Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. | ||||
| CVE-2026-73634 | 1 Apache | 1 Struts | 2026-08-17 | 7.5 High |
| Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected. This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. | ||||
| CVE-2026-73632 | 1 Apache | 1 Struts | 2026-08-17 | 4.3 Medium |
| Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-response serialization state could be shared across concurrent requests, allowing response content associated with one request to become observable in another. Only the SMD / JSON-RPC handling of the JSON interceptor is affected, which is not enabled by default; applications using the json result type are not affected. This issue affects Apache Struts: 7.2.1. Users are recommended to upgrade to version 7.3.0, which fixes the issue. | ||||
| CVE-2026-73631 | 1 Apache | 1 Struts | 2026-08-17 | 4.3 Medium |
| Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-request parsing state could be shared across concurrent requests, allowing data associated with one request to become observable in another, and configured parsing limits not to be enforced as intended. Populating actions from a JSON request body is not enabled by default; applications that do not use the JSON plugin are not affected. This issue affects Apache Struts: 7.2.1. Users are recommended to upgrade to version 7.3.0, which fixes the issue. | ||||
| CVE-2026-65400 | 1 Apple | 1 Macos | 2026-08-17 | 9.8 Critical |
| An authentication issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1. An attacker on the network may be able to authenticate to Screen Sharing without valid credentials. | ||||
| CVE-2026-19884 | 1 Eclipse | 1 Theia | 2026-08-17 | N/A |
| In Eclipse Theia versions up to and including 1.69.0, opening a folder starts source control integration without requiring the user to trust the folder first. This affects applications built on Theia that include the git integration, such as the Theia IDE. Both Theia's own `@theia/git` extension and the builtin VS Code `git` extension run git commands such as `git status` as soon as a repository is detected. Since git honors repository-local configuration, a folder containing an attacker-controlled `.git/config` with `core.fsmonitor` (or a comparable hook-like setting) causes the configured command to be executed. The configuration can be delivered by burying a bare repository inside a regular repository (OVE-20210718-0001), so cloning an attacker-supplied repository and opening it in a Theia-based application is sufficient to execute arbitrary commands with the privileges of the user, without any confirmation prompt. As of 1.70.0, plugins that declare `capabilities.untrustedWorkspaces.supported: false`, which includes the builtin git extension, are no longer loaded or activated in an untrusted workspace, and the deprecated `@theia/git` extension has been removed, so no git command is executed against an untrusted folder. | ||||