Export limit exceeded: 372316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372316 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38599 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2024-38592 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash. | ||||
| CVE-2024-38590 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level. | ||||
| CVE-2024-38587 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds. | ||||
| CVE-2024-38580 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines. | ||||
| CVE-2024-38577 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38576 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu: Fix buffer overflow in print_cpu_stall_info() The rcuc-starvation output from print_cpu_stall_info() might overflow the buffer if there is a huge difference in jiffies difference. The situation might seem improbable, but computers sometimes get very confused about time, which can result in full-sized integers, and, in this case, buffer overflow. Also, the unsigned jiffies difference is printed using %ld, which is normally for signed integers. This is intentional for debugging purposes, but it is not obvious from the code. This commit therefore changes sprintf() to snprintf() and adds a clarifying comment about intention of %ld format. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38572 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bound access of qmi_invoke_handler() Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2024-38570 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. | ||||
| CVE-2024-38564 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks. | ||||
| CVE-2024-38558 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed. | ||||
| CVE-2024-38555 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2024-38552 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | ||||
| CVE-2024-38544 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. | ||||
| CVE-2024-38542 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: boundary check before installing cq callbacks Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow. | ||||
| CVE-2024-38541 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char). | ||||
| CVE-2024-38539 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw When running blktests nvme/rdma, the following kmemleak issue will appear. kmemleak: Kernel memory leak detector initialized (mempool available:36041) kmemleak: Automatic memory scanning thread started kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 17 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88855da53400 (size 192): comm "rdma", pid 10630, jiffies 4296575922 hex dump (first 32 bytes): 37 00 00 00 00 00 00 00 c0 ff ff ff 1f 00 00 00 7............... 10 34 a5 5d 85 88 ff ff 10 34 a5 5d 85 88 ff ff .4.].....4.].... backtrace (crc 47f66721): [<ffffffff911251bd>] kmalloc_trace+0x30d/0x3b0 [<ffffffffc2640ff7>] alloc_gid_entry+0x47/0x380 [ib_core] [<ffffffffc2642206>] add_modify_gid+0x166/0x930 [ib_core] [<ffffffffc2643468>] ib_cache_update.part.0+0x6d8/0x910 [ib_core] [<ffffffffc2644e1a>] ib_cache_setup_one+0x24a/0x350 [ib_core] [<ffffffffc263949e>] ib_register_device+0x9e/0x3a0 [ib_core] [<ffffffffc2a3d389>] 0xffffffffc2a3d389 [<ffffffffc2688cd8>] nldev_newlink+0x2b8/0x520 [ib_core] [<ffffffffc2645fe3>] rdma_nl_rcv_msg+0x2c3/0x520 [ib_core] [<ffffffffc264648c>] rdma_nl_rcv_skb.constprop.0.isra.0+0x23c/0x3a0 [ib_core] [<ffffffff9270e7b5>] netlink_unicast+0x445/0x710 [<ffffffff9270f1f1>] netlink_sendmsg+0x761/0xc40 [<ffffffff9249db29>] __sys_sendto+0x3a9/0x420 [<ffffffff9249dc8c>] __x64_sys_sendto+0xdc/0x1b0 [<ffffffff92db0ad3>] do_syscall_64+0x93/0x180 [<ffffffff92e00126>] entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause: rdma_put_gid_attr is not called when sgid_attr is set to ERR_PTR(-ENODEV). | ||||
| CVE-2024-38538 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-38388 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup Use the control private_free callback to free the associated data block. This ensures that the memory won't leak, whatever way the control gets destroyed. The original implementation didn't actually remove the ALSA controls in hda_cs_dsp_control_remove(). It only freed the internal tracking structure. This meant it was possible to remove/unload the amp driver while leaving its ALSA controls still present in the soundcard. Obviously attempting to access them could cause segfaults or at least dereferencing stale pointers. | ||||
| CVE-2024-38385 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section. | ||||