Export limit exceeded: 16024 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 423499 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (423499 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-109454 | 1 Microsoft | 1 Sharepoint Server | 2026-11-10 | 9 Critical |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network. | ||||
| CVE-2026-99282 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb. | ||||
| CVE-2026-108414 | 1 Microsoft | 11 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 8 more | 2026-11-10 | 7 High |
| Use after free in Windows Projected File System Filter Driver allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-99281 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tun: Require CAP_NET_ADMIN to attach to an ownerless device Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap devices.") The idea was to allow the permissions on /dev/net/tun to be relaxed to 0666 and thus allow owners of tun devices assigned with TUNSETOWNER to actually open it and get at their devices. What we missed at the time was that persistent devices with *no* owner were already essentially world-consumable, and anyone who could open the device node could also attach to those. Even then, using persistent devices with no explicitly set owner — on the (false) presumption that CAP_NET_ADMIN would be required to open them — wasn't an egregious userspace bug. There are cases where it does make sense to separate the creation/configuration of the netdevice, from the process which shovels packets into it. Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e ("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message noted that if both uid and gid are set, both have to match (in itself a bizarre choice) — but still not that with *neither* set, no permission at all was required. Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed new queues to be attached to a device from the moment of its creation, with no way for userspace to close the race between creation and a subsequent TUNSET{OWNER,GROUP}. In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried to fix things to be saner: only require the user *or* the group to match, in line with standard POSIX permissions, and require CAP_NET_ADMIN if neither the user nor group authorised the access (although it put the CAP_NET_ADMIN check first, and would wrongly have reported the capability as having been used even when it was not). That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group permission check") due to allegedly causing a regression in an selinux test suite which *expected* the attachment to succeed when authorised by none of user, group, nor CAP_NET_ADMIN: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/ We should not break UAPI. But we don't have to consider an selinux test case which deliberately exercises a security flaw to be UAPI worth preserving either. To which end, I have fixed it in selinux-testsuite commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the relabel tests"). So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been assigned an owner or group, while leaving the weird tun ownership model as it was (user *and* group have to match, if both are set). If someone still wants to fix the latter (which wasn't actually the reason the previous attempt was reverted), they can do it under separate cover. Permit attaching to an existing device only if an owner and/or group was set and the caller matches all that were set, or if the caller has CAP_NET_ADMIN. The only behavioural change is that a device with no owner or group now requires CAP_NET_ADMIN to attach — precisely the loophole we want to close. And put the CAP_NET_ADMIN check in the right place this time. | ||||
| CVE-2026-85839 | 1 Microsoft | 15 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 12 more | 2026-11-10 | 8.8 High |
| Heap-based buffer overflow in Microsoft WDAC OLE DB provider for SQL allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-85838 | 1 Microsoft | 15 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 12 more | 2026-11-10 | 8.8 High |
| Heap-based buffer overflow in Microsoft WDAC OLE DB provider for SQL allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-99274 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix fiemap wild read on empty truncated response smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob and loops for the next chunk. If the server reports STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns -E2BIG with out_data == NULL and out_data_len == 0, and the existing length checks accept the empty result. The loop then evaluates next = out_data[num - 1].file_offset + ... with num == 0, reading 16 bytes before NULL. Reject a truncated range blob that contains no range, so the resume offset is never computed from an empty response. Also require the last range in a truncated blob to advance the resume offset without overflowing, and to stay within the requested range; a malicious or broken server could otherwise make no progress or underflow len and loop forever. Free the previous response buffer before retrying. Reproduced on 6.6.87.2 with a malicious SMB2 server that answers FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged on mainline. | ||||
| CVE-2026-99273 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged. | ||||
| CVE-2026-62903 | 1 Microsoft | 3 Microsoft Data Sqlclient 6 1, Microsoft Data Sqlclient 7 0, Microsoft Data Sqlclient 7 1 | 2026-11-10 | 7.4 High |
| Authentication bypass by capture-replay in SQL Server allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-99271 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Clear prev_fbuf on capture buffer release A KASAN slab-use-after-free read was reported in submit_audio_out_urb() when generating an impulse test signal: BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline] BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249 Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785 Allocated by task 11: kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144 line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158 line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329 line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728 Freed by task 7785: kfree+0xf8/0x390 mm/slub.c:6566 line6_buffer_release sound/usb/line6/pcm.c:176 [inline] line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170 __line6_pcm_release sound/usb/line6/pcm.c:305 [inline] line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313 snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183 line6pcm->prev_fbuf points into the capture PCM stream buffer (line6pcm->in.buffer), which is updated during audio_in_callback() to feed rate synchronization, software monitoring, and impulse test signal generation on playback side. When all capture streams are closed, line6_buffer_release() frees pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf. If playback is subsequently started (e.g. via impulse test signal volume control snd_line6_impulse_volume_put()), submit_audio_out_urb() dereferences the stale pointer line6pcm->prev_fbuf under in.lock, resulting in a slab-use-after-free read. Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing the capture stream buffer under in.lock, ensuring that no stale buffer pointer can be accessed by submit_audio_out_urb(). | ||||
| CVE-2026-102200 | 1 Microsoft | 11 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 8 more | 2026-11-10 | 4.7 Medium |
| Time-of-check time-of-use (toctou) race condition in Windows NTFS allows an authorized attacker to perform tampering locally. | ||||
| CVE-2026-99270 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_handler(). When TCP socket migration fails at inet_ehash_insert() in reqsk_timer_handler(), we jump to the no_ownership: label and free the new reqsk immediately with __reqsk_free(). Thus, we must stop the new reqsk's timer before jumping to the label, but the timer might be missed since the cited commit, resulting in UAF. As we are in the original reqsk's timer context, we can safely call timer_delete_sync() for the new reqsk. Let's pass false to __inet_csk_reqsk_queue_drop() to stop the new reqsk's timer. | ||||
| CVE-2026-100223 | 1 Microsoft | 13 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 10 more | 2026-11-10 | 7.8 High |
| An elevation of privilege vulnerability exists when reparse points are created by sandboxed processes allowing sandbox escape. An attacker who successfully exploited the vulnerability could use the sandbox escape to elevate privileges on an affected system. To exploit the vulnerability, an attacker would first have to log on to the system, and then run a specially crafted application to take control over the affected system. The security update addresses the vulnerability by preventing sandboxed processes from creating reparse points targeting inaccessible files. | ||||
| CVE-2026-99172 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it. | ||||
| CVE-2026-83684 | 1 Microsoft | 4 Windows Server 2016, Windows Server 2019, Windows Server 2022 and 1 more | 2026-11-10 | 7.5 High |
| Buffer over-read in Windows iSCSI Target Service allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-99146 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) | ||||
| CVE-2026-99122 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer. | ||||
| CVE-2026-85801 | 1 Microsoft | 13 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 10 more | 2026-11-10 | 7.8 High |
| Use after free in Windows Local Security Authority Subsystem Service (LSASS) allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-94513 | 1 Microsoft | 4 Microsoft Sql Server 2022 For X64-based Systems \(cu27\), Sql Server 2022, Sql Server 2025 and 1 more | 2026-11-10 | 8 High |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-99109 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | ||||