Export limit exceeded: 384439 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384439 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74746 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.). | ||||
| CVE-2026-74748 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-74751 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word. | ||||
| CVE-2026-74754 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: pair EH runtime PM get and put shost->eh_noresume is currently consulted twice in one error handling iteration: once before scsi_autopm_get_host() and once again before scsi_autopm_put_host(). That is racy when a PM-triggered error path flips shost->eh_noresume while the SCSI EH thread is still running. The problem flow looks like this: PM path ufshcd_set_dev_pwr_mode() shost->eh_noresume = 1 ufshcd_execute_start_stop <-- trigger EH ... shost->eh_noresume = 0 EH path scsi_error_handler() if (!shost->eh_noresume) scsi_autopm_get_host() <-- skipped ... if (!shost->eh_noresume) scsi_autopm_put_host() <-- executed later In that case one EH iteration can skip autoresume on entry and still drop a runtime PM reference on exit. That leaves an unmatched runtime PM put and can trigger a runtime PM usage count underflow. Fix this by making eh_noresume a regular bool so it can be accessed with READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use that snapshot for both runtime PM get and put decisions. | ||||
| CVE-2026-30057 | 1 Free5gc | 1 Free5gc | 2026-08-28 | 7.5 High |
| An issue in the CreateUEContext handler component of free5gc v4.1.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted request. | ||||
| CVE-2026-38345 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-28 | 5.5 Medium |
| A Division-by-Zero vulnerability in the ff_sws_init_single_context function (/libswscale/utils.c) of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via a crafted input. | ||||
| CVE-2026-75418 | 2026-08-28 | 7.5 High | ||
| A path traversal vulnerability exists in the built-in preview/development web server of Lektor <3.3.14 on Windows. An attacker with network access to the server can send a crafted HTTP request containing path traversal sequences to read arbitrary files accessible to the process, disclosing sensitive information such as system files and deployment configuration files containing credentials. | ||||
| CVE-2026-59272 | 1 Spring | 1 Spring Amqp | 2026-08-28 | 6.8 Medium |
| Any application shipping logs to RabbitMQ over TLS via the Log4j2 appender, relying on the documented default, is exposed to man-in-the-middle interception of every log event. Spring AMQP 4.1.0 Spring AMQP 4.0.0 - 4.0.4 Spring AMQP 3.2.0 - 3.2.12 Spring AMQP 2.4.18 and earlier | ||||
| CVE-2026-59286 | 1 Spring | 1 Spring For Graphql | 2026-08-28 | N/A |
| The GraphiQL page bundled with Spring for GraphQL loads JavaScript libraries from a public CDN, without Subresource Integrity checks. An attacker can inject malicious code in those scripts and execute arbitrary code on the browser loading the GraphiQL page. Spring for GraphQL 2.0.0 - 2.0.4 Spring for GraphQL 1.4.0 - 1.4.6 Spring for GraphQL 1.1.0 - 1.3.9 Spring for GraphQL 1.0.0 - 1.0.7 | ||||
| CVE-2026-59291 | 1 Spring | 1 Spring Cloud Function | 2026-08-28 | 2 Low |
| Potential arbitrary file read and SSRF vulnerability in Spring Cloud Function. Spring Cloud Function 5.0.0 - 5.0.3 Spring Cloud Function 4.3.0 - 4.3.4 Spring Cloud Function 4.2.0 - 4.2.7 | ||||
| CVE-2026-59314 | 1 Spring | 1 Spring Framework | 2026-08-28 | N/A |
| Applications that build a Content-Disposition header value from untrusted input may be vulnerable to HTTP response splitting when the input is a malicious file name. Spring Framework 7.0.0 - 7.0.8 Spring Framework 6.2.0 - 6.2.19 Spring Framework 6.1.0 - 6.1.28 Spring Framework 6.0.0 - 6.0.30 Spring Framework 5.3.0 - 5.3.49 Spring Framework 5.2.25.RELEASE and earlier | ||||
| CVE-2026-18324 | 2 Wordpress, Wpmudev | 2 Wordpress, Forminator Forms – Contact Form, Payment Form & Custom Form Builder | 2026-08-28 | 7.2 High |
| The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Rich-Text Textarea Field in all versions up to, and including, 1.57.0.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that the targeted Textarea field has the Rich-Text editor option enabled. | ||||
| CVE-2026-5510 | 2026-08-28 | 6.4 Medium | ||
| The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'give_form' shortcode in all versions up to, and including, 4.14.4. This is due to insufficient input sanitization and output escaping on the continue_button_title and display_style shortcode attributes, which are passed through sanitize_text_field() but not properly escaped when output in HTML data attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-6128 | 2026-08-28 | 6.4 Medium | ||
| The All-in-One WP Migration Unlimited Extension plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'ai1wm_backups_path' parameter in all versions up to, and including, 2.84. This is due to insufficient input sanitization and output escaping on user-supplied attributes combined with missing authorization checks on the settings() function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever an administrator accesses the plugin settings page. The vulnerability was partially patched in version 2.84. | ||||
| CVE-2026-30047 | 1 Open5gs | 1 Open5gs | 2026-08-28 | 7.5 High |
| A reachable assertion vulnerability in the /nsmf-pdusession/v1/sm-contexts component of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted DELETE request. | ||||
| CVE-2026-30056 | 1 Free5gc | 1 Free5gc | 2026-08-28 | 7.5 High |
| A NULL pointer dereference in the AMF NGAP Dispatcher component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via supplying crafted NGAP messages during the initialization of a new RAN connection. | ||||
| CVE-2026-35868 | 2026-08-28 | N/A | ||
| A Command Injection vulnerability exists in the bs_SetLimitCli_info function within the libshare.so library of LB-link Router AC2100_AZ3 V1.0.4. This flaw occurs due to insufficient validation and sanitization of user-supplied input before it is passed to a system-level command execution context. An attacker can exploit this vulnerability by injecting specially crafted shell metacharacters or payloads into the vulnerable parameter, resulting in the execution of arbitrary operating system commands. | ||||
| CVE-2026-81521 | 1 Mongodb | 1 Go Driver | 2026-08-28 | 6.5 Medium |
| The MongoDB Go Driver's client-level bulk write operation may accept a caller-supplied database name containing a reserved separator character without escaping it before the name is used to build the target namespace for the operation. An application that passes untrusted input as a database name could therefore have the write directed at a database and collection other than the ones it intended. Only the Client.BulkWrite API is affected. | ||||
| CVE-2026-81522 | 1 Mongodb | 1 C\# Driver | 2026-08-28 | 8.1 High |
| A weakness in the MongoDB C++ Driver's handling of caller-supplied namespace identifiers allows special characters embedded in those identifiers. An application that builds a namespace identifier from untrusted input without validating it may therefore have its operation directed at a different target than intended. This can result in limited unauthorized read and write access to data belonging to another logical tenant of the affected application. | ||||
| CVE-2026-81524 | 1 Mongodb | 1 C Driver | 2026-08-28 | 5.4 Medium |
| A weakness in the MongoDB C Driver allows special elements in caller-supplied database and collection name components to pass without sanitization when the driver composes the target namespace for an operation. An application that incorporates untrusted input into these name components can have operations directed at a resource other than the one intended. | ||||