Export limit exceeded: 395624 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395624 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90200 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are validated against the volume size with: if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) goto out; mlcn and mlcn2 are u64 fields read directly from the boot sector. sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus the is_power_of_2() check below it), but the multiplication is done in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn near 2^62 with sct_per_clst == 4 wraps to 0, which compares below any non-zero 'sectors', so the check is bypassed and the malformed record is accepted. The accepted mlcn is then used unchanged in sbi->mft.lbo = mlcn << cluster_bits; In practice the resulting reads fail at the block layer (sb_bread() returns NULL via grow_buffers()'s check_mul_overflow() guard), so today this manifests as mount failing in odd places rather than as something more dangerous, but the validation step is still wrong and there is no reason for callers to rely on the block layer to catch a value that should never have been accepted in the first place. Use check_mul_overflow() to compute the two sector positions and fail the mount if either multiplication wraps; this preserves the existing semantics (mlcn * sct_per_clst >= sectors) instead of switching to division (mlcn >= sectors / sct_per_clst), which would tighten the check at edge cases where 'sectors' is not a multiple of sct_per_clst. The check_*_overflow() style is the one ntfs3 already uses for similar on-disk arithmetic in fs/ntfs3/run.c. | ||||
| CVE-2026-90228 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix NULL pointer dereference in nvmet_execute_identify_ns_zns() When a host issues an Identify command with CNS 05h (I/O Command Set specific Identify Namespace) and CSI 02h (ZNS) targeting a file-backed namespace, nvmet_execute_identify_ns_zns() calls bdev_is_zoned() on req->ns->bdev. A file-backed namespace has no block device, so req->ns->bdev is NULL and bdev_is_zoned() dereferences it, oopsing. The I/O command set is selected by the host-supplied CSI field and the command is routed here whenever CONFIG_BLK_DEV_ZONED is enabled, independent of the namespace backing type, so any file-backed namespace is exposed. Reject the command with Invalid Field when the namespace is not backed by a block device. | ||||
| CVE-2026-90238 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit(). That helper takes the same ops_mutex, re-acquiring a non-recursive mutex already held by the current thread, so any init failure deadlocks. Unwind the error path in stages instead, releasing only what each failure point acquired. This also avoids the issues that an unconditional teardown would hit at the earlier failures, such as a runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access while the device is unpowered. | ||||
| CVE-2026-90332 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush cached MSI write before unmapping the iATU The MSI-X path already flushes any posted MSI-X write before tearing down its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry") to make sure the write reaches the Root Complex before the outbound window that translates it disappears. The MSI path has the same problem but no equivalent flush. When the Endpoint driver caches an MSI target address and later observes that the Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing iATU entry and reprograms it for the new address. Between the last MSI writel() and the unmap there may still be a posted write sitting in the fabric, and unmapping the iATU entry can drop or misroute that write. Fix this by reading back from the mapped MSI window before the unmap. The readback drains any posted MSI writes through the same iATU entry that mapped them, which is the same logic the MSI-X path uses. [mani: commit log] | ||||
| CVE-2026-90387 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to dma_free_from_pool(), which will fail to recognize the chunk Pass the virtual address returned by the allocation path into swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This keeps the pool free path using the same virtual address as the allocator. | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90425 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | ||||
| CVE-2026-93054 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-device_add() failures like unregister: remove UIO attributes while the info pointer is still valid, then clear idev->info under info_lock and wake existing waiters/async users before removing the device and minor. This makes already-open file descriptors observe the same "device gone" state as normal uio_unregister_device(). | ||||
| CVE-2026-93111 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not set ftrace_managed, it would fail to release the tracing_multi link when attaching tracing_multi link and then attaching fentry link. [ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97 ... [ 3.733170] bpf_tracing_multi_link_release+0x14/0x30 [ 3.733890] bpf_link_free+0x58/0x130 [ 3.734414] bpf_link_release+0x23/0x30 Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). | ||||
| CVE-2026-57229 | 1 Oisf | 1 Suricata | 2026-09-20 | 5.3 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SMTP MIME parser in rust/src/mime/smtp.rs does not fully reset state when processing Content-Type: message/rfc822 encapsulation. An outer MIME part's encoding or filename state can leak into the inner message, allowing crafted mail to evade detections based on file.data, file.name, or extracted URLs when SMTP MIME decoding is enabled. This issue is fixed in version 8.0.6. | ||||
| CVE-2026-63448 | 1 Oisf | 1 Suricata | 2026-09-20 | 5.9 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the SMB parser can retain force-completed transactions on flows where Suricata sees payload in only one direction, including async-oneside flows, because cleanup waits for inspection in the unseen direction. The transaction creation paths in rust/src/smb can exceed the intended SMB_MAX_TX bound, and cleanup repeatedly scans the growing list. Sustained one-directional SMB traffic can therefore cause unbounded per-flow state and CPU and memory exhaustion. This issue is fixed in versions 8.0.6 and 7.0.17. | ||||
| CVE-2026-63447 | 1 Oisf | 1 Suricata | 2026-09-20 | 7.5 High |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.5 until 8.0.6, the FTP parser in src/app-layer-ftp.c can continue allocating transactions after app-layer.protocols.ftp.max-tx is reached while processing one large chunk of FTP command data. The oversized transaction list is repeatedly processed with quadratic complexity after the too_many_transactions event, allowing crafted FTP traffic to degrade packet processing, reduce monitoring visibility, or cause denial of service. This issue is fixed in version 8.0.6. | ||||
| CVE-2026-87909 | 2 Opajaap, Wordpress | 2 Wp Photo Album Plus, Wordpress | 2026-09-20 | 7.5 High |
| The WP Photo Album Plus plugin for WordPress is vulnerable to Remote Code Execution in all versions via the wppa_image_magick function. This is due to insufficient sanitization of the multipart upload filename before concatenation into an ImageMagick command string executed via exec(), with only escapeshellcmd() applied to the whole command rather than quoting individual arguments. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute code on the server. escapeshellcmd() escapes shell metacharacters but does not prevent argument injection because spaces remain as argument separators, and the filename sanitization applied at the database layer is never applied to the physical temporary file path used for ImageMagick processing. | ||||
| CVE-2026-90202 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers _base_release_memory_pools() unconditionally frees every ioc->pcie_sg_lookup[] entry, including ones the setup loop never allocated after a partial failure, causing a "bad dma" warning on debug kernels or a NULL pointer dereference otherwise. | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2026-90207 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event leaving it running after rawmidi_release_priv() has set rfile->rmidi to NULL which leads to: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0 Call trace: snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P) snd_rawmidi_input_event_work+0x1c/0x2c process_one_work+0x150/0x3a4 worker_thread+0x190/0x318 Apply a similar approach to commit ef7607ab1c8ad ("ALSA: seq: midi: Serialize output teardown with event_input") which fixed the same issue in the output direction, but updated to use RCU following Takashi Iwai's proposed follow-on patch [1]. With this change in place, midisynth_unsubscribe() clears the input file so snd_midi_input_event() will not re-trigger the stream and will be quiesced by the cancel_work_sync() in snd_rawmidi_input_trigger(). [1] https://lore.kernel.org/linux-sound/20260813144224.753399-1-tiwai@suse.de/ | ||||
| CVE-2026-90209 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one of the associated debugfs files is being written to can cause a deadlock: $ echo >.../vmur/level $ rmmod vmur =================================================== debugfs write debugfs_file_get() debug_unregister() mutex_lock(debug_mutex) debugfs_remove() wait for debugfs_file_put() debug_file_ops.write() debug_input() mutex_lock(debug_mutex) ==> DEADLOCK Fix this by splitting debug_unregister() into an s390dbf and debugfs part, and running only the s390dbf part with debug_mutex locked. | ||||
| CVE-2026-90214 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: fix stream_data leak on open error In xlnx_formatter_pcm_open(), stream_data is allocated and adata->play_stream or adata->capture_stream is assigned early. If a later step, such as snd_pcm_hw_constraint_step() or snd_pcm_hw_constraint_integer(), fails, the function returns the error immediately. ALSA does not call the close callback when open fails, so stream_data is leaked and the stream pointer is left dangling, pointing to a substream that ALSA frees. A later interrupt would then call snd_pcm_period_elapsed() on the freed substream. Free stream_data and clear the stream pointer on the error paths. | ||||
| CVE-2026-90216 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix rollback for explicit UBI device numbers ubi_init_attach() rolls back module initialization failures by scanning ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes the parameter index matches the UBI device number. That assumption is not true when mtd= specifies an explicit ubi_num. A successfully attached device can be stored at a higher ubi_devices[] slot, and a later failure can miss it during rollback. Scan the full ubi_devices[] array and detach by the actual array index, matching the way UBI devices are stored. | ||||
| CVE-2026-90218 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix WARNING in res_to_rt syzbot reported a WARN_ON(!res->dev) in res_to_rt() triggered via addr_handler() during asynchronous address resolution: " WARNING: drivers/infiniband/core/restrack.c:138 at res_to_rt+0x1c4/0x230 CPU#1: kworker/u8:4/59 Modules linked in: CPU: 1 UID: 0 PID: 59 Comm: kworker/u8:4 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine, BIOS Google 07/24/2026 Workqueue: ib_addr process_one_req RIP: 0010:res_to_rt+0x1c4/0x230 drivers/infiniband/core/restrack.c:138 RSP: 0018:ffffc9000201f850 EFLAGS: 00010293 RAX: ffffffff88d00ce5 RBX: ffff88807f0fd4f8 RCX: ffff88801e6e0000 RDX: 0000000000000000 RSI: ffffffff8fd996f0 RDI: 0000000000000003 RBP: 0000000000000000 R08: ffff88801e6e0000 R09: 000000000000000a R10: 0000000000000009 R11: 0000000000000000 R12: dffffc0000000000 R13: 1ffff1100fe1fa9f R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff888125012000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00001d559c3d2000 CR3: 0000000077c4c000 CR4: 00000000003526f0 Call Trace: <TASK> rdma_restrack_add+0x5a/0x8a0 drivers/infiniband/core/restrack.c:236 addr_handler+0x41a/0x5a0 drivers/infiniband/core/cma.c:3534 process_one_req+0x2eb/0x540 drivers/infiniband/core/addr.c:624 process_one_work kernel/workqueue.c:3375 [inline] process_scheduled_works+0xc4e/0x1630 kernel/workqueue.c:3458 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3539 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> " In addr_handler(), cma_acquire_dev_by_src_ip() is called to populate id_priv->cma_dev and bind the associated ib_device to id_priv->id.device. If cma_acquire_dev_by_src_ip() returns an error (non-zero status), the ID remains unassociated with any RDMA device. Previously, rdma_restrack_add(&id_priv->res) was invoked unconditionally even when cma_acquire_dev_by_src_ip() failed, passing a resource with a NULL dev pointer and triggering the WARN_ON assertion in res_to_rt(). Fix this by only adding the resource to restrack when acquiring the device succeeds. | ||||