Export limit exceeded: 412646 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412646 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43115 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ] | ||||
| CVE-2026-43107 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding. | ||||
| CVE-2026-43101 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data() We need to check __in6_dev_get() for possible NULL value, as suggested by Yiming Qian. Also add skb_dst_dev_rcu() instead of skb_dst_dev(), and two missing READ_ONCE(). Note that @dev can't be NULL. | ||||
| CVE-2026-43083 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ioam6: fix OOB and missing lock When trace->type.bit6 is set: if (trace->type.bit6) { ... queue = skb_get_tx_queue(dev, skb); qdisc = rcu_dereference(queue->qdisc); This code can lead to an out-of-bounds access of the dev->_tx[] array when is_input is true. In such a case, the packet is on the RX path and skb->queue_mapping contains the RX queue index of the ingress device. If the ingress device has more RX queues than the egress device (dev) has TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues. Add a check to avoid this situation since skb_get_tx_queue() does not clamp the index. This issue has also revealed that per queue visibility cannot be accurate and will be replaced later as a new feature. While at it, add missing lock around qdisc_qstats_qlen_backlog(). The function __ioam6_fill_trace_data() is called from both softirq and process contexts, hence the use of spin_lock_bh() here. | ||||
| CVE-2026-43073 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quadwords can be non-temporal on x86. The exception handling means that it _can_ be used for user space accesses, but not on its own - it needs all the normal "start user space access" logic around it. But typically the user space access would be the source, not the non-temporal destination. That was the original intention of this, where the destination was some fragile persistent memory target that needed non-temporal stores in order to catch machine check exceptions synchronously and deal with them gracefully. Thus that non-descriptive name: one use case was to copy from user space into a non-cached kernel buffer. However, the existing users are a mix of that intended use-case, and a couple of random drivers that just did this as a performance tweak. Some of those random drivers then actively misused the user copying version (with STAC/CLAC and all) to do kernel copies without ever even caring about the exception handling, _just_ for the non-temporal destination. Rename it as a first small step to actually make it halfway sane, and change the prototype to be more normal: it doesn't take a user pointer unless the caller has done the proper conversion, and the argument size is the full size_t (it still won't actually copy more than 4GB in one go, but there's also no reason to silently truncate the size argument in the caller). Finally, use this now sanely named function in the NTB code, which mis-used a user copy version (with STAC/CLAC and all) of this interface despite it not actually being a user copy at all. | ||||
| CVE-2026-43059 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced mgmt_pending_valid(), which not only validates the pending command but also unlinks it from the pending list if it is valid. This change in semantics requires updates to several completion handlers to avoid list corruption and memory safety issues. This patch addresses two left-over issues from the aforementioned rework: 1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove() is replaced with mgmt_pending_free() in the success path. Since mgmt_pending_valid() already unlinks the command at the beginning of the function, calling mgmt_pending_remove() leads to a double list_del() and subsequent list corruption/kernel panic. 2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error path is removed. Since the current command is already unlinked by mgmt_pending_valid(), this foreach loop would incorrectly target other pending mesh commands, potentially freeing them while they are still being processed concurrently (leading to UAFs). The redundant mgmt_cmd_status() is also simplified to use cmd->opcode directly. | ||||
| CVE-2026-43053 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but before the attr bmap truncation commits, this assumption breaks. Recovery replays the attr bmap intact (the inode still has attr fork extents), but suppresses replay of all cancelled leaf/node blocks, maybe leaving them as stale data on disk. On the next mount, xlog_recover_process_iunlinks() retries inactivation and attempts to read the root node via the attr bmap. If the root node was not replayed, reading the unreplayed root block triggers a metadata verification failure immediately; if it was replayed, following its child pointers to unreplayed child blocks triggers the same failure: XFS (pmem0): Metadata corruption detected at xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78 XFS (pmem0): Unmount and run xfs_repair XFS (pmem0): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117 Fix this in two places: In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a child block, immediately remove the entry that references it from the parent node in the same transaction. This eliminates the window where the parent holds a pointer to a cancelled block. Once all children are removed, the now-empty root node is converted to a leaf block within the same transaction. This node-to-leaf conversion is necessary for crash safety. If the system shutdown after the empty node is written to the log but before the second-phase bmap truncation commits, log recovery will attempt to verify the root block on disk. xfs_da3_node_verify() does not permit a node block with count == 0; such a block will fail verification and trigger a metadata corruption shutdown. on the other hand, leaf blocks are allowed to have this transient state. In xfs_attr_inactive(), split the attr fork truncation into two explicit phases. First, truncate all extents beyond the root block (the child extents whose parent references have already been removed above). Second, invalidate the root block and truncate the attr bmap to zero in a single transaction. The two operations in the second phase must be atomic: as long as the attr bmap has any non-zero length, recovery can follow it to the root block, so the root block invalidation must commit together with the bmap-to-zero truncation. | ||||
| CVE-2026-43049 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that. | ||||
| CVE-2026-43048 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value] | ||||
| CVE-2026-43042 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed. | ||||
| CVE-2026-43036 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 | ||||
| CVE-2026-43034 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries. | ||||
| CVE-2026-43022 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists hci_cmd_sync_queue_once() needs to indicate whether a queue item was added, so caller can know if callbacks are called, so it can avoid leaking resources. Change the function to return -EEXIST if queue item already exists. Modify all callsites to handle that. | ||||
| CVE-2026-43009 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix incorrect pruning due to atomic fetch precision tracking When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as a destination, thus receiving the old value from the memory location. The current backtracking logic does not account for this. It treats atomic fetch operations the same as regular stores where the src register is only an input. This leads the backtrack_insn to fail to propagate precision to the stack location, which is then not marked as precise! Later, the verifier's path pruning can incorrectly consider two states equivalent when they differ in terms of stack state. Meaning, two branches can be treated as equivalent and thus get pruned when they should not be seen as such. Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to also cover atomic fetch operations via is_atomic_fetch_insn() helper. When the fetch dst register is being tracked for precision, clear it, and propagate precision over to the stack slot. For non-stack memory, the precision walk stops at the atomic instruction, same as regular BPF_LDX. This covers all fetch variants. Before: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit After: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0 mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1 mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit | ||||
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | ||||
| CVE-2026-31767 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Stop adjusting the horizontal timing values based on the compression ratio in command mode. Bspec seems to be telling us to do this only in video mode, and this is also how the Windows driver does things. This should also fix a div-by-zero on some machines because the adjusted htotal ends up being so small that we end up with line_time_us==0 when trying to determine the vtotal value in command mode. Note that this doesn't actually make the display on the Huawei Matebook E work, but at least the kernel no longer explodes when the driver loads. (cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525) | ||||
| CVE-2026-31746 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed. | ||||
| CVE-2026-31725 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31724 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31723 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||