Export limit exceeded: 22405 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22405 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54297 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix memory leak after finding block group with super blocks At exclude_super_stripes(), if we happen to find a block group that has super blocks mapped to it and we are on a zoned filesystem, we error out as this is not supposed to happen, indicating either a bug or maybe some memory corruption for example. However we are exiting the function without freeing the memory allocated for the logical address of the super blocks. Fix this by freeing the logical address. | ||||
| CVE-2023-54272 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a possible null-pointer dereference in ni_clear() In a previous commit c1006bd13146, ni->mi.mrec in ni_write_inode() could be NULL, and thus a NULL check is added for this variable. However, in the same call stack, ni->mi.mrec can be also dereferenced in ni_clear(): ntfs_evict_inode(inode) ni_write_inode(inode, ...) ni = ntfs_i(inode); is_rec_inuse(ni->mi.mrec) -> Add a NULL check by previous commit ni_clear(ntfs_i(inode)) is_rec_inuse(ni->mi.mrec) -> No check Thus, a possible null-pointer dereference may exist in ni_clear(). To fix it, a NULL check is added in this function. | ||||
| CVE-2023-54275 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup crypto_alloc_shash() allocates resources, which should be released by crypto_free_shash(). When ath11k_peer_find() fails, there has memory leak. Add missing crypto_free_shash() to fix this. | ||||
| CVE-2023-54276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") moved the initialization of the reply cache into nfsd startup, but didn't account for the stats counters, which can be accessed before nfsd is ever started. The result can be a NULL pointer dereference when someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still shut down. This is a regression and a user-triggerable oops in the right situation: - non-x86_64 arch - /proc/fs/nfsd is mounted in the namespace - nfsd is not started in the namespace - unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats" Although this is easy to trigger on some arches (like aarch64), on x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the fixed_percpu_data. That struct looks just enough like a newly initialized percpu var to allow nfsd_reply_cache_stats_show to access it without Oopsing. Move the initialization of the per-net+per-cpu reply-cache counters back into nfsd_init_net, while leaving the rest of the reply cache allocations to be done at nfsd startup time. Kudos to Eirik who did most of the legwork to track this down. | ||||
| CVE-2023-54204 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sunplus: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, 1. the memory allocated in mmc_alloc_host() will be leaked 2. null-ptr-deref will happen when calling mmc_remove_host() in remove function spmmc_drv_remove() because deleting not added device. Fix this by checking the return value of mmc_add_host(). Moreover, I fixed the error handling path of spmmc_drv_probe() to clean up. | ||||
| CVE-2025-24484 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-54277 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. | ||||
| CVE-2023-54278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vmem: split pages when debug pagealloc is enabled Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. | ||||
| CVE-2023-54279 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: fw: Allow firmware to pass a empty env fw_getenv will use env entry to determine style of env, however it is legal for firmware to just pass a empty list. Check if first entry exist before running strchr to avoid null pointer dereference. | ||||
| CVE-2022-50868 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50873 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses a reference of pointer as the argument of kfree, which is the wrong pointer and then may hit crash like this: Unable to handle kernel paging request at virtual address 00ffff003363e30c Internal error: Oops: 96000004 [#1] SMP Call trace: rb_next+0x20/0x5c ext4_readdir+0x494/0x5c4 [ext4] iterate_dir+0x168/0x1b4 __se_sys_getdents64+0x68/0x170 __arm64_sys_getdents64+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821) SMP: stopping secondary CPUs Starting crashdump kernel... | ||||
| CVE-2022-50863 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: free unused skb to prevent memory leak This avoid potential memory leak under power saving mode. | ||||
| CVE-2022-50875 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will be NULL, and strcmp() will cause null pointer dereference. | ||||
| CVE-2022-50878 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init() A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check. 812 if (!bridge->encoder) { Dereference the pointer bridge->encoder. 810 drm_connector_attach_encoder(<9611->connector, bridge->encoder); | ||||
| CVE-2023-54192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block We got a kernel panic if old_addr is NULL. https://bugzilla.kernel.org/show_bug.cgi?id=217266 BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] ? vfs_write+0x2ae/0x3f0 ? vfs_write+0x2ae/0x3f0 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f69095fe53f | ||||
| CVE-2022-50883 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent decl_tag from being referenced in func_proto arg Syzkaller managed to hit another decl_tag issue: btf_func_proto_check kernel/bpf/btf.c:4506 [inline] btf_check_all_types kernel/bpf/btf.c:4734 [inline] btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763 btf_parse kernel/bpf/btf.c:5042 [inline] btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709 bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342 __sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034 __do_sys_bpf kernel/bpf/syscall.c:5093 [inline] __se_sys_bpf kernel/bpf/syscall.c:5091 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being referenced in func_proto") but for the argument. | ||||
| CVE-2023-54211 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled. | ||||
| CVE-2022-50859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list") extend the dialects from 3 to 4, but forget to decrease the extended length when specific the dialect, then the message length is larger than expected. This maybe leak some info through network because not initialize the message body. After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is reduced from 28 bytes to 26 bytes. | ||||
| CVE-2022-50858 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: alcor: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path. | ||||
| CVE-2023-54316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: refscale: Fix uninitalized use of wait_queue_head_t Running the refscale test occasionally crashes the kernel with the following error: [ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 8569.952900] #PF: supervisor read access in kernel mode [ 8569.952902] #PF: error_code(0x0000) - not-present page [ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0 [ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI [ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021 [ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190 : [ 8569.952940] Call Trace: [ 8569.952941] <TASK> [ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale] [ 8569.952959] kthread+0x10e/0x130 [ 8569.952966] ret_from_fork+0x1f/0x30 [ 8569.952973] </TASK> The likely cause is that init_waitqueue_head() is called after the call to the torture_create_kthread() function that creates the ref_scale_reader kthread. Although this init_waitqueue_head() call will very likely complete before this kthread is created and starts running, it is possible that the calling kthread will be delayed between the calls to torture_create_kthread() and init_waitqueue_head(). In this case, the new kthread will use the waitqueue head before it is properly initialized, which is not good for the kernel's health and well-being. The above crash happened here: static inline void __add_wait_queue(...) { : if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here The offset of flags from list_head entry in wait_queue_entry is -0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task structure is zero initialized, the instruction will try to access address 0xffffffffffffffe8, which is exactly the fault address listed above. This commit therefore invokes init_waitqueue_head() before creating the kthread. | ||||