Export limit exceeded: 15919 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15919 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-95663 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 4.8 Medium |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component. This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2. When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. | ||||
| CVE-2026-97024 | 2 Flatpak, Redhat | 2 Flatpak, Enterprise Linux | 2026-10-26 | 7.1 High |
| A path traversal vulnerability in Flatpak's handling of the files/etc directory during app deployment allows a malicious Flatpak app to cause certain host system files (such as passwd, group, machine-id, or resolv.conf) to be emptied or replaced with a symlink when the app is installed or upgraded. In system-wide installations, the write is performed as root. | ||||
| CVE-2026-97023 | 2 Flatpak, Redhat | 2 Flatpak, Enterprise Linux | 2026-10-26 | 7.1 High |
| A path traversal vulnerability in Flatpak's handling of the export/bin directory during app deployment allows a malicious Flatpak app to cause deletion of attacker-chosen files outside the deployment directory when the app is installed or upgraded. In system-wide installations, the deletion is performed as root. | ||||
| CVE-2026-116115 | 1 Yoosee | 1 Gm8135s Camera | 2026-10-26 | 3.1 Low |
| A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-72705 | 1 Rocq-prover | 1 Rocq | 2026-10-26 | 6.3 Medium |
| The guard checker in Rocq Prover does not follow recursive calls made through a fixpoint's own arguments. A fixpoint may pass itself as a higher-order argument to a second fixpoint, which then applies it to a value that is not a subterm of the structural argument. Passing the recursive function to a plain definition is rejected because the checker unfolds the definition and observes the call, but passing it to a fixpoint is accepted because higher-order recursive calls through fixpoint arguments are not tracked. This admits a type that is definitionally equal to its own negation, so self-application produces False in purely definitional code, without tactics, axioms, plugins or unsafe flags, and Print Assumptions reports the result as closed under the global context. Fixed in Rocq 9.2.0. | ||||
| CVE-2026-72704 | 1 Rocq-prover | 1 Rocq | 2026-10-26 | 6.3 Medium |
| The guard checker in Rocq Prover does not recheck the recursive tree representation of an inductive type parameter after that parameter has been changed by transport. A fixpoint may apply a rewrite along an equality between types to its recursive argument, which the guard checker accepts because the inductive type is preserved, while the recursive tree recorded for the parameter is altered. A second fixpoint that calls the first inherits the altered recursive tree without verification, so a call that is not structurally decreasing is accepted as terminating. The resulting non-terminating definition proves that a natural number equals its own successor and therefore False, from which any proposition follows. The demonstration uses two axioms that follow from univalence and are consistent with the calculus of inductive constructions, so the contradiction comes from the guard check rather than from the assumptions. A fix is proposed but not merged. | ||||
| CVE-2026-72703 | 1 Rocq-prover | 1 Rocq | 2026-10-26 | 6.3 Medium |
| The guard checker in Rocq Prover treats a parameter of a nested mutual fixpoint as uniform without examining calls between the different bodies of that fixpoint. find_uniform_parameters in kernel/inductive.ml inspects only self-recursive calls, so when no body calls itself the function concludes that every parameter is uniform. A parameter that grows through a cross-call from one body to another therefore keeps the subterm specification it inherited from the enclosing fixpoint, and a recursive call guarded by that specification is accepted although the argument is not structurally smaller. A non-terminating definition is admitted as structurally decreasing, which yields a term whose value equals its own successor and so a proof of False, from which any proposition follows. The proof requires no axioms, plugins or unsafe flags and Print Assumptions reports it as closed under the global context. Introduced in Coq 8.20 and fixed in Rocq 9.2.0. | ||||
| CVE-2026-25253 | 1 Openclaw | 1 Openclaw | 2026-10-25 | 8.8 High |
| OpenClaw (aka clawdbot or Moltbot) before 2026.1.29 obtains a gatewayUrl value from a query string and automatically makes a WebSocket connection without prompting, sending a token value. | ||||
| CVE-2026-109194 | 2 Red Hat, Redhat | 3 Red Hat Quay 3, Quay, Red Hat Quay 3 | 2026-10-25 | 6.4 Medium |
| A flaw was found in Red Hat Quay. The build trigger management application programming interface (API) fails to verify whether a requested trigger belongs to the specified repository. An authenticated user with administrative access to any repository can view, modify, or permanently delete build triggers and associated write tokens of another repository if they know the victim trigger's universally unique identifier (UUID). | ||||
| CVE-2026-100517 | 2 Villatheme, Wordpress-extensions | 2 Photo Reviews For Woocommerce, Photo Reviews For Woocommerce | 2026-10-25 | 7.5 High |
| Unauthenticated Insecure Direct Object References (IDOR) in Photo Reviews for WooCommerce <= 1.2.30 versions. | ||||
| CVE-2026-116145 | 1 Imagemagick | 1 Imagemagick | 2026-10-25 | 3.9 Low |
| ImageMagick before 6.9.13-58 and 7.x before 7.1.2-32 contains a security policy bypass caused by an incomplete fix for the policy bypass reported in GHSA-jjp4-3fwf-393j. An attacker able to supply input to ImageMagick can evade configured security policy restrictions, allowing operations the policy was intended to block. | ||||
| CVE-2026-85864 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-25 | 7.8 High |
| Improper privilege management in Python allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83872 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-25 | 7.8 High |
| Incorrect conversion between numeric types in Windows TCP/IP allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-99017 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied. | ||||
| CVE-2026-115973 | 1 Faveosuite | 2 Faveo-helpdesk, Faveo Helpdesk | 2026-10-24 | 7.3 High |
| A vulnerability was identified in FaveoSuite Faveo Helpdesk 2.0.3. Affected by this issue is the function ForgotPasswordController::sendResetLinkEmail/PasswordController::reset of the file app/Http/Controllers/Auth/ForgotPasswordController.php. The manipulation leads to weak password recovery. The attack may be initiated remotely. The vendor was contacted early about this disclosure. | ||||
| CVE-2026-98964 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: use the local P2P device on metadata allocation failure nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data and metadata SGL allocations succeed. If the data allocation succeeds but the metadata allocation fails, out_free_sg passes req->p2p_dev to pci_p2pmem_free_sgl() before that assignment has taken place. Pass the local p2p_dev argument instead, so cleanup uses the same PCI device as the successful data allocation. | ||||
| CVE-2026-98975 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop exchanging reflink flags when exchanging mappings When an exchange covers both files from offset 0 to i_disk_size, xmi_can_exchange_reflink_flags() assumes every mapping moved and hands the reflink flag over to the other file. That assumption is wrong. A file can still own shared blocks past i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size without unmapping anything. The flag is cleared anyway, and the next write to such a block happens in place instead of CoW, corrupting the other file that shares it. Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN") fixed one instance of this. Rather than add another special case, stop moving the flags. xfs_exchmaps_ensure_reflink() already sets the flag on both inodes before the exchange, so both just keep it. Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older kernels may still carry them; recovery already masks them off, so they stay in the log format mask and are ignored. XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from one inode to the other along with the extents. Just removing that is not enough here: the exchange path flags both inodes up front in xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the inode receiving the shared extents would be left without the flag. Set it on both inodes instead, and make sure both have a CoW fork, since an inode with the reflink flag is expected to have one. The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a truncate to zero removes it. | ||||
| CVE-2026-115424 | 1 Redhat | 2 Openshift, Openshift Container Platform | 2026-10-24 | 5.5 Medium |
| A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory. | ||||
| CVE-2026-98959 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated--- | ||||
| CVE-2026-98993 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. | ||||