Export limit exceeded: 348471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348471 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43057 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path. | ||||
| CVE-2026-43241 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid. | ||||
| CVE-2026-43242 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: k3-socinfo: Fix regmap leak on probe failure The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind. | ||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | ||||
| CVE-2026-31688 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: driver core: enforce device_lock for driver_match_device() Currently, driver_match_device() is called from three sites. One site (__device_attach_driver) holds device_lock(dev), but the other two (bind_store and __driver_attach) do not. This inconsistency means that bus match() callbacks are not guaranteed to be called with the lock held. Fix this by introducing driver_match_device_locked(), which guarantees holding the device lock using a scoped guard. Replace the unlocked calls in bind_store() and __driver_attach() with this new helper. Also add a lock assertion to driver_match_device() to enforce this guarantee. This consistency also fixes a known race condition. The driver_override implementation relies on the device_lock, so the missing lock led to the use-after-free (UAF) reported in Bugzilla for buses using this field. Stress testing the two newly locked paths for 24 hours with CONFIG_PROVE_LOCKING and CONFIG_LOCKDEP enabled showed no UAF recurrence and no lockdep warnings. | ||||
| CVE-2026-31689 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch. | ||||
| CVE-2026-31690 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0 | ||||
| CVE-2026-43215 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix locking usage for tcon fields We used to use the cifs_tcp_ses_lock to protect a lot of objects that are not just the server, ses or tcon lists. We later introduced srv_lock, ses_lock and tc_lock to protect fields within the corresponding structs. This was done to provide a more granular protection and avoid unnecessary serialization. There were still a couple of uses of cifs_tcp_ses_lock to provide tcon fields. In this patch, I've replaced them with tc_lock. | ||||
| CVE-2026-43222 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory. | ||||
| CVE-2026-43243 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src Trying to access link enc on a dpia link will cause a crash otherwise | ||||
| CVE-2025-47404 | 1 Qualcomm | 377 215 Mobile, 215 Mobile Firmware, 5g Fixed Wireless Access and 374 more | 2026-05-06 | 6.5 Medium |
| Memory corruption when dynamically changing the size of a previously allocated buffer while its contents are being modified. | ||||
| CVE-2025-47405 | 1 Qualcomm | 33 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 30 more | 2026-05-06 | 7.8 High |
| Memory corruption when processing camera sensor input/output control codes with invalid output buffers. | ||||
| CVE-2025-47408 | 1 Qualcomm | 41 Fastconnect 6200, Fastconnect 6200 Firmware, Fastconnect 6900 and 38 more | 2026-05-06 | 7.8 High |
| Memory corruption when another driver calls an IOCTL with invalid input/output buffer. | ||||
| CVE-2025-47406 | 1 Qualcomm | 63 Cologne, Cologne Firmware, Fastconnect 6700 and 60 more | 2026-05-06 | 6.1 Medium |
| Information Disclosure while processing IOCTL handler callbacks without verifying buffer size. | ||||
| CVE-2026-43244 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa | ||||
| CVE-2026-20195 | 2026-05-06 | 5.3 Medium | ||
| A vulnerability in an identity management API endpoint of Cisco ISE could allow an unauthenticated, remote attacker to enumerate valid user accounts on an affected device. This vulnerability exists because error messages are observed when the affected API endpoint is called. An attacker could exploit this vulnerability by sending a series of crafted requests to the affected endpoint and analyzing the differentiated responses. A successful exploit could allow the attacker to compile a list of valid usernames on an affected system. | ||||
| CVE-2026-20168 | 2026-05-06 | 6.5 Medium | ||
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to retrieve files that they do not have permission to access. This vulnerability is due to insufficient file access checks. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to read files that they are not authorized to access. | ||||
| CVE-2025-29165 | 1 Dlink | 2 Dir-1253, Dir-1253 Firmware | 2026-05-06 | 9.8 Critical |
| An issue in D-Link DIR-1253 MESH V1.6.1684 allows an attacker to escalate privileges via the etc/shadow.sample component | ||||
| CVE-2025-70614 | 2 Opencode, Opencode Systems | 2 Ussd Gateway, Ussd Gateway | 2026-05-06 | 8.1 High |
| OpenCode Systems OC Messaging / USSD Gateway OC Release 6.32.2 contains a broken access control vulnerability in the web-based control panel allowing authenticated low-privileged attackers to gain to access to arbitrary SMS messages via a crafted company or tenant identifier parameter. | ||||
| CVE-2025-11158 | 1 Hitachi | 1 Vantara Pentaho Data Integration And Analytics | 2026-05-06 | 9.1 Critical |
| Hitachi Vantara Pentaho Data Integration & Analytics versions before 10.2.0.6, including 9.3.x and 8.3.x, do not restrict Groovy scripts in new PRPT reports published by users, allowing insertion of arbitrary scripts and leading to a RCE. | ||||