Export limit exceeded: 378824 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378824 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72254 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: reject fib expression on the netdev egress hook A fib expression in a netdev egress base chain dereferences nft_in(pkt), NULL on the transmit path, causing a NULL pointer dereference at eval. nft_fib_validate() masks the hook with NF_INET_* values, but netdev hook numbers are a separate enum that aliases them (NF_NETDEV_EGRESS == NF_INET_LOCAL_IN), so an egress chain passes validation and then faults. Add nft_fib_netdev_validate() that limits each result/flag to the netdev hook where the device it reads exists: the input-device cases (OIF, OIFNAME, ADDRTYPE with F_IIF) to ingress, the output-device case (ADDRTYPE with F_OIF) to egress, ADDRTYPE with no device flag to both. Also restrict nft_fib_validate() to NFPROTO_IPV4/IPV6/INET so its NF_INET_* masks are not applied to another family's hooks. | ||||
| CVE-2026-9771 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 8.8 High |
| The flash_copy() system call is verified by z_vrfy_flash_copy() in drivers/flash/flash_util.c. On builds with CONFIG_USERSPACE enabled, this handler is the kernel-side trust boundary for a user-mode caller. Prior to the fix it validated only the output buffer (K_SYSCALL_MEMORY_WRITE) and passed the two struct device * arguments, src_dev and dst_dev, directly into the implementation without any object validation — unlike every sibling flash syscall, which guards its device pointer with K_SYSCALL_DRIVER_FLASH. A user-mode thread fully controls the values of src_dev/dst_dev and the contents of its own address space. The implementation z_impl_flash_copy() dereferences these pointers and calls through their driver-API function tables (e.g. api->get_parameters(dst_dev), flash_read(src_dev, ...), flash_write(dst_dev, ...)). By supplying a pointer to a forged struct device whose api table contains attacker-chosen function pointers, an unprivileged thread can cause the kernel to call arbitrary code in supervisor mode; passing any arbitrary or invalid address otherwise yields a kernel crash or out-of-bounds read. The result is a local privilege escalation out of the userspace sandbox (with kernel denial-of-service and information disclosure as lesser outcomes). The fix adds K_SYSCALL_DRIVER_FLASH(src_dev, read) and K_SYSCALL_DRIVER_FLASH(dst_dev, write) to z_vrfy_flash_copy(), which verify each device is a registered flash-driver kernel object the calling thread is permitted to use before any dereference, closing the path completely. | ||||
| CVE-2026-75058 | 1 Jetbrains | 1 Intellij Idea | 2026-08-17 | 5.5 Medium |
| In JetBrains IntelliJ IDEA before 2026.2.1 xXE was possible in the Eclipse settings importers | ||||
| CVE-2026-12004 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 8.7 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. | ||||
| CVE-2026-11937 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 3.1 Low |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 and IBM Security Verify Access Container 10.0 through 10.0.9.2 Reverse Proxy in certain configurations is vulnerable to a denial of service attack. | ||||
| CVE-2026-10673 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 8.3 High |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. | ||||
| CVE-2026-53410 | 2 Zoom, Zoom Communications | 5 Remote Control For Zoom Contact Center, Rooms, Workplace Desktop and 2 more | 2026-08-17 | 7 High |
| A time-of-check to time-of-use (TOCTOU) race condition in the installation and uninstallation process of certain Zoom Clients for Windows could allow an authenticated local user to escalate privileges. | ||||
| CVE-2026-72170 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally calls drop_nlink() on regular files, even when the inode's nlink is already zero. In cacheless mode the client refetches inode metadata from the server (the source of truth) on every operation, so by the time v9fs_remove() returns, the locally cached nlink may already reflect the post-unlink value: 1. Client initiates unlink, server processes it and sets nlink to 0 2. Client refetches inode metadata (nlink=0) before unlink returns 3. Client's v9fs_remove() completes successfully 4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0 This race is easily triggered under heavy unlink workloads, such as stress-ng's unlink stressor, producing the following warning: WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8 Call trace: drop_nlink+0x4c/0xc8 v9fs_remove+0x1e0/0x250 [9p] v9fs_vfs_unlink+0x20/0x38 [9p] vfs_unlink+0x13c/0x258 ... In cacheless mode the server is authoritative and the inode is on its way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count() entirely when neither CACHE_META nor CACHE_LOOSE is set, which both avoids the warning and removes a class of nlink races (two concurrent unlinkers observing nlink > 0 and both calling drop_nlink()) that an nlink == 0 guard alone would only narrow rather than close. | ||||
| CVE-2026-64868 | 1 Quantumnous | 1 New-api | 2026-08-17 | 7.5 High |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. | ||||
| CVE-2026-59909 | 1 Dell | 1 Objectscale | 2026-08-17 | 7.1 High |
| Dell ObjectScale, versions prior to 4.3.0.1, contain(s) a Path Traversal vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. | ||||
| CVE-2026-61666 | 1 Faye | 1 Websocket-driver-ruby | 2026-08-17 | N/A |
| websocket-driver is a WebSocket protocol handler with pluggable I/O. Prior to 0.8.2, WebSocket::Driver.server() passes a malformed Host header to URI.parse in lib/websocket/http/request.rb without catching URI::InvalidURIError, allowing a remote client to crash a TCP-backed WebSocket server when the application does not catch the error from parse(). This issue is fixed in version 0.8.2. | ||||
| CVE-2026-12629 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 4.6 Medium |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). | ||||
| CVE-2026-65942 | 1 Apache | 1 Ranger | 2026-08-17 | 7.5 High |
| TLS hostname verification issue in Apache Ranger Client Code in versions <= 2.8.0. Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-17616 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 6.8 Medium |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. | ||||
| CVE-2026-64148 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. | ||||
| CVE-2019-10869 | 1 Ninjaforms | 1 Ninja Forms File Uploads | 2026-08-17 | 8.1 High |
| Path Traversal and Unrestricted File Upload exists in the Ninja Forms plugin before 3.0.23 for WordPress (when the Uploads add-on is activated). This allows an attacker to traverse the file system to access files and execute code via the includes/fields/upload.php (aka upload/submit page) name and tmp_name parameters. | ||||
| CVE-2026-64149 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering. | ||||
| CVE-2026-73646 | 1 Postcss | 1 Postcss | 2026-08-17 | 7.5 High |
| PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.18, lib/previous-map.js loadMap() passes attacker-controlled sourceMappingURL values to join(dirname(opts.from), annotation), and loadFile() permits traversed or absolute .map paths, allowing untrusted CSS processed without map: false to disclose sourcesContent from arbitrary reachable .map files through result.map. This issue is fixed in version 8.5.18. | ||||
| CVE-2026-72888 | 1 Vurtdev | 1 Net-oauth | 2026-08-17 | 6.5 Medium |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require. smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked. A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. | ||||
| CVE-2026-72887 | 1 Vurtdev | 1 Net-oauth | 2026-08-17 | 9.8 Critical |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token. Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one. oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. | ||||