Export limit exceeded: 409320 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409320 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409320 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74396 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path through mlx5r_umr_unmap_free_xlt(). After mlx5_odp_populate_xlt() became fallible, its error path returned directly and skipped that cleanup. This leaks the XLT DMA mapping and buffer. If the emergency XLT page was used, it also leaves xlt_emergency_page_mutex locked. Break out of the loop so execution falls through the existing cleanup path. | ||||
| CVE-2026-74394 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: fix integer overflow in immediate data length check imm_buf->len is a user-controlled uint32_t received from the network. Adding it to imm_data_offset without overflow checking allows a malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap around to a small value, bypassing the bounds check, and subsequently passing a ~4GB length to sg_init_one(). Use check_add_overflow() to detect wrapping before the comparison. | ||||
| CVE-2026-74390 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-59966 | 2026-10-16 | 5.7 Medium | ||
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.10, executes user-controlled Automation regular-expression patterns with Python re.sub() without complexity validation or an execution timeout when an authenticated user stores a catastrophic-backtracking regex and any user in the same Space imports a matching recipe. Request processing uses Automation.param_2, apply_regex_replace_automation, sub, api/recipe-from-source/. The attack works because the shared-Space automation engine evaluates the malicious pattern during recipe import and can occupy a Gunicorn worker until its request timeout. This can exhaust application worker slots and make the service unavailable to users. This issue is fixed in version 2.6.10. | ||||
| CVE-2026-57488 | 2026-10-16 | 7.1 High | ||
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, raw_to_int in upnp/src/genlib/net/http/httpparser.c parses Content-Length with strtol and casts the resulting long to a 32-bit int before the caller stores it as unsigned int. On LP64 systems, values greater than INT_MAX can truncate or wrap, so the HTTP parser can accept a body length different from the declared value. A remote adjacent-network peer can use the resulting parser disagreement to leave bytes to be interpreted as another request in persistent or proxied contexts, or can make a worker wait for an extremely large body and cause denial of service. This issue is fixed in 2.0.2. | ||||
| CVE-2026-55862 | 2026-10-16 | 6.5 Medium | ||
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.0, multiple ixml DOM traversal functions process deeply nested XML with unbounded recursion. The iterative XML parser accepts the document, but ixmlPrintDomTreeRecursive in ixml/src/ixml.c and ixmlNode_getElementsByTagNameRecursive, ixmlNode_getElementsByTagNameNSRecursive, ixmlNode_cloneNodeTreeRecursive, and ixmlNode_isAncestor in ixml/src/node.c recurse over firstChild and nextSibling links. An unauthenticated peer on the local network can supply deeply nested XML through a SOAP request, exhaust a service thread's stack, and crash the UPnP service. This is an incomplete-fix case for CVE-2021-28302 because its remediation converted ixmlNode_free but left these traversal paths recursive. This issue is fixed in 2.0.0. | ||||
| CVE-2026-30971 | 2026-10-16 | 8.8 High | ||
| ZoneMinder is a free, open source closed-circuit television software application. Prior to 1.39.2, 1.38.2, and 1.36.40, ZoneMinder interpolates an unvalidated monitor Device field into shell commands in PHP and Perl control paths when an authenticated user with monitor-create or monitor-edit permission saves a Local monitor whose Device Path contains shell metacharacters and the monitor control or startup path runs. In this attack mechanism, the stored Device value reaches Perl qx() and backtick execution before zmdc.pl argument detainting, while separate PHP command paths use bypassable escapeshellcmd defenses. The attacker can execute arbitrary commands as the web server user. This vulnerability is fixed in 1.39.2, 1.38.2, and 1.36.40. | ||||
| CVE-2026-17275 | 1 Ibm | 1 I | 2026-10-16 | 3.7 Low |
| IBM i 7.3, 7.4, 7.5, and 7.6 could allow a remote attacker to perform unauthorized manipulation of distributed transactions due to improper validation of attacker-supplied transaction identifiers. | ||||
| CVE-2026-111718 | 2026-10-16 | 6.5 Medium | ||
| AipexBase through commit 690adb9 contains a sql injection vulnerability that allows attackers to inject SQL through the order_by and group_by fields of the /api/data/invoke endpoint. Attackers can supply subqueries or EXTRACTVALUE and UPDATEXML functions that bypass the SqlGuard denylist and row-level security, reading other users' rows and tables. | ||||
| CVE-2026-111708 | 2026-10-16 | 9.8 Critical | ||
| WhaTicket Community through commit cf04795 contains an authentication bypass vulnerability that allows unauthenticated attackers to self-register as administrators via POST /auth/signup. Attackers can omit the profile field or set it to admin, gaining user management, settings, and access to all tickets, contacts, messages, and WhatsApp connections. | ||||
| CVE-2026-111703 | 2026-10-16 | 6.3 Medium | ||
| yshop-crm through 2.1.3 contains an insecure direct object reference vulnerability that allows authenticated sales users to access other users' customer records by supplying arbitrary ids. Attackers can enumerate ids against the get, update, delete and do-open endpoints to read contact details, overwrite or delete customers, or release them into the public pool. | ||||
| CVE-2026-111698 | 2026-10-16 | 6.5 Medium | ||
| HUIZHI ChargeOS cloud through 3.0.9 contains a missing authorization vulnerability in the hcp-mp PayController.xcxRecharge endpoint that allows attackers to modify any member's wallet balance without payment. Attackers can send requests with arbitrary amount and userId parameters to credit or reduce balances and consume charging services for free. | ||||
| CVE-2026-111692 | 2026-10-16 | 9.8 Critical | ||
| DataBuff ai-apm-web through 0.1.10 contains an authentication bypass vulnerability that allows unauthenticated attackers to forge admin session tokens by using the hardcoded HMAC secret in JwtTokenService. Attackers can sign a payload of admin and a future expiry with the default dev-secret to gain full administrative access to protected /webapi routes, including the Doris SQL query API. | ||||
| CVE-2026-111688 | 1 Exrick | 1 Xboot | 2026-10-16 | 4.3 Medium |
| Exrick XBoot through 3.3.4 contains an authorization bypass vulnerability that allows authenticated users to evade role data-scope restrictions by sending openDataFilter=false. Attackers can append this parameter to the department getByParentId or search endpoints to retrieve the entire organization's department tree and names outside their assigned scope. | ||||
| CVE-2026-111687 | 2026-10-16 | 9.8 Critical | ||
| WeRSS (we-mp-rss) through 1.5.3 contains a remote code execution vulnerability that allows unauthenticated attackers to run code via the template parameter of the public GET /rss/{feed_id} endpoint. Attackers can supply a non-built-in ext value and a {{=expression}} template whose object-subclass traversal bypasses the eval denylist to run OS commands as the service account. | ||||
| CVE-2026-111682 | 2026-10-16 | 6.5 Medium | ||
| EFAK 5.0.0 through 5.1.0 contains a missing authorization vulnerability that allows authenticated low-privilege users to read LLM provider API keys through the /api/model-config REST API. Attackers with any ROLE_USER account can query /api/model-config/page or /api/model-config/{id} to retrieve unmasked keys, enabling provider account access and incurred costs. | ||||
| CVE-2026-111673 | 1 Thecosy | 1 Icecms | 2026-10-16 | 9.8 Critical |
| IceCMS through 4.1.5 contains a missing authentication vulnerability that allows unauthenticated attackers to modify, delete, or disable any account because /User/** is excluded from the Shiro jwt filter. Attackers can send PUT requests to /User/updateUser to set a new password and role on any userId, including administrators, enabling full account takeover. | ||||
| CVE-2026-111662 | 2026-10-16 | 5.8 Medium | ||
| Chaskiq through 2.0.3 contains a server-side request forgery vulnerability that allows unauthenticated attackers to make the server fetch arbitrary URLs via the url parameter of the /oembed endpoint. Attackers can target loopback, private, or cloud-metadata addresses through FetchLinkCardService, which follows redirects and skips TLS verification, to read internal page titles and descriptions. | ||||
| CVE-2026-111657 | 1 Beikeshop | 1 Beikeshop | 2026-10-16 | 4.3 Medium |
| BeikeShop through 2.0.0.31 contains an insecure direct object reference vulnerability in the markAsShipped handler of RmaController that allows authenticated customers to modify other customers' returns. Attackers can submit sequential RMA ids to the account/rmas/{id}/mark_as_shipped endpoint to overwrite courier names and tracking numbers and mark approved returns as shipped. | ||||