Export limit exceeded: 378232 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378232 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72006 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: free mlx5_st_idx_data on final dealloc Workloads that repeatedly allocate and release mkeys carrying TPH steering-tag hints (e.g. churning RDMA MRs) leak one struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced and the kmalloc slab grows over time. When the last reference to an ST table entry is dropped, mlx5_st_dealloc_index() removed the entry from idx_xa but the backing mlx5_st_idx_data allocation was never freed. Free idx_data after the xa_erase() so the lifetime of the bookkeeping struct matches the lifetime of the ST entry it tracks. | ||||
| CVE-2026-68473 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address() mask_user_address() incorrectly checks for CONFIG_E500 instead of CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on E500 hardware. Fix the check to use the correct name. | ||||
| CVE-2026-68469 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours. | ||||
| CVE-2026-68468 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: free duplicate generated name Every MTD registration runs mtd_virt_concat_create_join(). Once a virtual concat has already been registered, the function builds the same name again and takes the equal-name branch. That branch skips to the next item without freeing the newly allocated string. Free the temporary name before continuing. | ||||
| CVE-2026-68466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. | ||||
| CVE-2026-68460 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated--- | ||||
| CVE-2026-68459 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi); | ||||
| CVE-2026-18387 | 2 Trainingbusinesspros, Wordpress | 2 Groundhogg — Crm, Newsletters, And Marketing Automation, Wordpress | 2026-08-15 | 6.5 Medium |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to generic SQL Injection via the 'tag_query' parameter in all versions up to, and including, 4.5.14 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with vendor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires the attacker to trigger the vulnerable Legacy_Contact_Query code path by submitting an unknown filter type (e.g. filters[0][0][type]=force_fallback), which causes a FilterException that dispatches execution away from the modern query handler. | ||||
| CVE-2026-16007 | 2026-08-15 | N/A | ||
| AppFlowy's qcuiknote feature is affected by a SQL injection vulnerability. Authenticated users with access to the feature can inject arbitrary SQL to exfiltrate data in the underlying SQL database. | ||||
| CVE-2026-15948 | 2 Themefic, Wordpress | 2 Hydra Booking — Appointment Scheduling & Booking Calendar, Wordpress | 2026-08-15 | 6.4 Medium |
| The Hydra Booking — Appointment Scheduling & Booking Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'first_name' parameter in all versions up to, and including, 1.2.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with host-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The tfhb_host role required to exploit this vulnerability can be self-assigned by any visitor via the plugin's public Signup shortcode, making this effectively exploitable by unauthenticated users who complete the registration flow. | ||||
| CVE-2026-13360 | 2 Wordpress, Wplegalpages | 2 Wordpress, Wplp Cookie Consent – Cookie Banner & Consent Management For Gdpr, Ccpa & Google Consent Mode | 2026-08-15 | 7.2 High |
| The Cookie Banner for GDPR / CCPA – WPLP Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'regionArray' parameter in all versions up to, and including, 4.3.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the site administrator has enabled the 'Support Google Consent Mode (GCM)' setting, which is disabled by default. Additionally, the AJAX handler performs no nonce or capability check, allowing any authenticated user including those with Subscriber-level access to overwrite the affected plugin setting. | ||||
| CVE-2026-17090 | 2 Beaverbuilder, Wordpress | 2 Beaver Builder Page Builder – Drag And Drop Website Builder, Wordpress | 2026-08-15 | 6.4 Medium |
| The Beaver Builder Page Builder – Drag and Drop Website Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Button Module 'button' (Button Code) Setting in all versions up to, and including, 2.10.2.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Beaver Builder grants editor access to any WordPress role holding the edit_posts capability by default, meaning Author-level users and above can exploit this vulnerability. | ||||
| CVE-2026-15993 | 2 10web, Wordpress | 2 Form Maker By 10web – Mobile-friendly Drag & Drop Contact Form Builder, Wordpress | 2026-08-15 | 5.3 Medium |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to blind SQL Injection via '{username}' Placeholder in Dynamic-Choice Field WHERE Clause in all versions up to, and including, 1.15.44 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This requires that a form is configured with a DB-backed dynamic choice field whose WHERE template references the {username} placeholder, and the attacker must first set their own display_name to a SQL payload via the standard WordPress profile edit screen before triggering the fm_reload_input AJAX endpoint. | ||||
| CVE-2026-16586 | 2 Contest-gallery, Wordpress | 2 Contest Gallery – Upload & Vote Photos, Media, Sell With Paypal & Stripe, Wordpress | 2026-08-15 | 6.5 Medium |
| The Contest Gallery – Upload & Vote Photos, Media, Sell with PayPal & Stripe plugin for WordPress is vulnerable to Second-Order SQL Injection via MultipleFiles Second-Order Payload via 'cg_multiple_files_for_post' -> 'cgRealId' in all versions up to, and including, 30.0.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-15453 | 2 Iqonicdesign, Wordpress | 2 Kivicare – Clinic & Patient Management System (ehr), Wordpress | 2026-08-15 | 6.5 Medium |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to generic SQL Injection via the 'searchTerm' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires a KiviCare custom role with the 'settings_view' permission (e.g., Doctor or Receptionist), meaning standard WordPress subscribers cannot exploit this without a KiviCare-assigned role. | ||||
| CVE-2026-73627 | 1 Jupyter | 1 Jupyterlab | 2026-08-15 | 7.1 High |
| JupyterLab (pip package 'jupyterlab') versions >=4.1.0,<=4.5.9 and >=4.6.0,<=4.6.1 contain a plugin manager lock-rule enforcement bypass. Two server-side enforcement gaps allow an authenticated user to circumvent administrator lock rules by making direct requests to the /lab/api/plugins endpoint, enabling or disabling plugins that were locked — including child plugins of multi-plugin extensions and plugins locked via the 'lock all' mechanism. This can impact data integrity and bypass hardening or restrictions (e.g., download/upload limits) implemented through locked plugins. Fixed in versions 4.6.2 and 4.5.10. | ||||
| CVE-2026-73623 | 2 Gitpython-developers, Gitpython Project | 2 Gitpython, Gitpython | 2026-08-15 | 7.5 High |
| GitPython before 3.1.54 contains an incomplete denylist in unsafe_git_clone_options that omits --template, allowing attackers to achieve arbitrary command execution during clone operations. Attackers can supply --template pointing to a directory containing malicious post-checkout hooks that execute when git clones the repository. | ||||
| CVE-2026-73619 | 2 Gitpython-developers, Gitpython Project | 2 Gitpython, Gitpython | 2026-08-15 | 6.5 Medium |
| GitPython before 3.1.57 contains an incomplete denylist in the unsafe_git_archive_options guard that omits --add-file and --add-virtual-file options. Attackers can supply these options to Repo.archive() to read arbitrary files from the filesystem and include them in the returned archive. | ||||
| CVE-2026-73507 | 1 Netty | 1 Netty | 2026-08-15 | 7.5 High |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-66271 | 2026-08-15 | 7.2 High | ||
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. | ||||