Export limit exceeded: 429811 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429811 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99706 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm: fix address wraparound when scanning large folio PTEs numa_rebuild_large_mapping() and do_swap_page() can be tricked into generating an address wraparound, crashing the kernel. All that's required is to map a tail page of a large folio close enough to the start/end of the address space to e.g., make unsigned long addr_start = addr - (nr << PAGE_SHIFT); to wrap around. Let's fix it by providing a better helper, folio_scan_range(), that takes care of staying within VMA and page table boundaries while handling possible wraparounds. There are some nasty details, like not being able to use pmd_addr_end() in this context. Add some helpful comments for these cases.
CVE-2026-99703 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix mremap deadlock when PMD sharing is possible move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for write while moving hugetlb PTEs. This prevents races with truncation and protects huge_pmd_unshare(), but the move loop must not call helpers that can acquire the same rwsem for read. huge_pte_alloc() can do that when the destination can use PMD sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for read while searching for a shareable PMD table. Calling it while the move path already holds i_mmap_rwsem for write can deadlock. Avoid that path for PMD-sized hugetlb mappings that can use PMD sharing. Instead of allocating or sharing the destination page table while moving, zap the source range and let the destination fault path populate or share the PMD lazily. Reuse the hugetlb unmap logic for the source-side zap by splitting the core loop out of __unmap_hugepage_range(). The wrapper keeps the existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush() behavior, while move_hugetlb_page_tables() can reuse the unmap loop with its existing mmu_gather.
CVE-2026-99694 1 Linux 1 Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target.
CVE-2026-99683 1 Linux 1 Linux Kernel 2026-11-20 6.7 Medium
In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place.
CVE-2026-99681 1 Linux 1 Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return.
CVE-2026-99674 1 Linux 1 Linux Kernel 2026-11-20 6.7 Medium
In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.
CVE-2026-99667 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ]
CVE-2026-99662 1 Linux 1 Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]
CVE-2026-99661 1 Linux 1 Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early.
CVE-2026-99610 1 Linux 1 Linux Kernel 2026-11-20 2.4 Low
In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: free the EP4 URB when input setup fails The three controllers that use the EP4 input URB allocate it before checking the endpoint type and before registering the input device. On failure they jump to exit_free_idev, which clears cdev->input_dev but leaves cdev->ep4_in_urb set. The card teardown then calls snd_usb_caiaq_input_free(), which returns early because input_dev is NULL, so the URB is never freed. Release the URB before dropping the input device on the error path.
CVE-2026-48858 1 Erlang 4 Erlang/otp, Erlang\/inets, Erlang\/otp and 1 more 2026-11-20 6.5 Medium
Server-Side Request Forgery (SSRF) vulnerability in Erlang/OTP ftp (ftp_internal module) allows FTP bounce attacks and SSRF via an unvalidated PASV response IP address. The ftp_internal:handle_ctrl_result/2 PASV handler (mode=passive, ipfamily=inet, ftp_extension=false) extracts the IP address from the server's 227 response and passes it directly to gen_tcp:connect/4 without validating it against the control connection peer address. The adjacent EPSV handlers correctly call peername(CSock) to derive the IP from the control connection, but the PASV handler does not. A malicious or compromised FTP server can redirect the client's data connection to an arbitrary internal host and port. On read operations (ftp:ls/1,2, ftp:nlist/1,2, ftp:recv/2,3), data from the redirected target is returned to the caller. On write operations (ftp:send/2,3, ftp:append/2,3), file content is sent to the redirected target. This enables SSRF against internal hosts, cloud metadata endpoints, and FTP bounce attacks against third-party hosts. The vulnerable path is the default configuration (mode=passive, ipfamily=inet, ftp_extension=false). RFC 2577 section 3 explicitly recommends validating the PASV response IP against the control connection peer. The ftp application is deprecated and scheduled for removal in OTP-30. This vulnerability is associated with program files lib/inets/src/ftp/ftp_internal.erl (inets 5.10.4 through 6.5, OTP 17.4 through 20.3) and lib/ftp/src/ftp_internal.erl (ftp 1.0 and later, OTP 21.0 and later). This issue affects OTP from OTP 17.4 before OTP 27.3.4.13, OTP 28.5.0.2, and OTP 29.0.2, corresponding to ftp from 1.0 before 1.2.3.1, 1.2.4.1, and 1.2.6, and inets from 5.10.4 before 7.0.
CVE-2026-130494 1 Moxa 1 Eds-510e Series 2026-11-20 N/A
An improper firmware authenticity verification vulnerability exists in the affected Ethernet Switches products. An authenticated remote attacker with administrative privileges could exploit the lack of cryptographic signature verification to install unauthorized firmware, potentially leading to arbitrary code execution on the affected device.
CVE-2026-121808 1 Elixir-grpc 2 Grpc, Grpc Core 2026-11-20 N/A
Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-grpc grpc_core and grpc allows unauthenticated attackers to exhaust server memory via a compressed Erlang external term in a gRPC message body. GRPC.Codec.Erlpack.decode/2 (grpc_core/lib/grpc/codec/erlpack.ex, and lib/grpc/codec/erlpack.ex before the package split) passes the message body to :erlang.binary_to_term/2. That function inflates a compressed term in full before it returns. The codec sets no limit on the decoded size, and its type checks run only on the decoded term. The server's max_body_size limit counts the compressed bytes of the request. A request with Content-Type: application/grpc+erlpack can therefore make the server allocate a term much larger than the request body. This issue affects grpc: from 0.4.0 before 1.0.0; grpc_core: from 1.0.0 before 1.1.0.
CVE-2026-130493 1 Moxa 1 Eds-510e Series 2026-11-20 N/A
A hard-coded cryptographic key vulnerability exists in affected Ethernet swiches. The use of a shared cryptographic key with insufficient key strength could allow an unauthenticated remote attacker, under certain conditions, to impersonate affected devices and potentially compromise the confidentiality and integrity of communications.
CVE-2026-99687 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands.
CVE-2026-99682 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: virtio_blk: use synchronous quiesce in virtblk_freeze_priv() blk_mq_run_work_fn() can call blk_mq_sched_dispatch_requests() through blk_mq_run_dispatch_ops(). The dispatcher checks QUEUE_FLAG_QUIESCED while the flag is clear. It can then be preempted before it gets a request. At that time, it has no queue usage reference, so blk_mq_freeze_queue() does not wait for it. virtblk_freeze_priv() then calls blk_mq_quiesce_queue_nowait() and blk_mq_unfreeze_queue(). A new request can enter the queue. The old dispatcher can run again, use its old flag check, get the new request, and call virtio_queue_rq(). At the same time, virtblk_freeze_priv() can reset the device, delete the virtqueues, and free vblk->vqs. The old dispatcher can then use a deleted virtqueue or a NULL vblk->vqs, and the kernel can crash. Fix this by using blk_mq_quiesce_queue(), which waits for dispatch code that was already running. Keep the existing freeze and unfreeze order. The queue remains quiesced until virtblk_restore_priv() calls blk_mq_unquiesce_queue().
CVE-2026-99669 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix truncate racing with PMD zapping zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty(). If this was the last mapping, truncation can skip unmapping the folio and proceed without waiting for the PMD lock, racing with dirtying. ifs_set_range_dirty() can oops if MADV_DONTNEED races with ftruncate() on XFS, when we get the folio set dirty after it was found to not be mapped anymore. Move folio_mark_dirty() and folio_mark_accessed() before rmap removal, matching the PTE zap path. This keeps the folio mapped while updating its state, so truncation must wait for the page table lock. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]
CVE-2026-99668 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]
CVE-2026-99664 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.
CVE-2026-99663 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ]