Export limit exceeded: 417452 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417452 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63901 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. | ||||
| CVE-2026-63902 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ] | ||||
| CVE-2026-63903 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?) | ||||
| CVE-2026-63904 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint. | ||||
| CVE-2026-63905 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report. | ||||
| CVE-2026-63906 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths. | ||||
| CVE-2026-63959 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory. | ||||
| CVE-2026-63955 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq(). | ||||
| CVE-2026-63954 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash. | ||||
| CVE-2026-63953 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path. | ||||
| CVE-2026-63951 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_writeback_endio A crash was observed in zram_writeback_endio due to a NULL pointer dereference in wake_up. The root cause is a race condition between the bio completion handler (zram_writeback_endio) and the writeback task. In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after releasing wb_ctl->done_lock. This creates a race window where the writeback task can see num_inflight become 0, return, and free wb_ctl before zram_writeback_endio calls wake_up(). CPU 0 (zram_writeback_endio) CPU 1 (writeback_store) ============================ ============================ zram_writeback_slots zram_submit_wb_request zram_submit_wb_request wait_event(wb_ctl->done_wait) spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); wake_up(&wb_ctl->done_wait); zram_complete_done_reqs spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); while (num_inflight) > 0) spin_lock(&wb_ctl->done_lock); list_del(&req->entry); spin_unlock(&wb_ctl->done_lock); // num_inflight becomes 0 atomic_dec(num_inflight); // Leave zram_writeback_slots // Free wb_ctl release_wb_ctl(wb_ctl); // UAF crash! wake_up(&wb_ctl->done_wait); This patch fixes this race by using RCU. By protecting wb_ctl with rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it, we ensure that wb_ctl remains valid during the execution of zram_writeback_endio. | ||||
| CVE-2026-63957 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. | ||||
| CVE-2026-63956 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. | ||||
| CVE-2026-63958 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. | ||||
| CVE-2026-63960 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports. | ||||
| CVE-2026-63961 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. | ||||
| CVE-2026-63907 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label. | ||||
| CVE-2026-118947 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-10-30 | 4.3 Medium |
| A flaw was found in the UMA resource registration endpoint of the keycloak-services component, which provides the core logic for Keycloak's authorization and identity services. The issue occurs when remote resource management is enabled, allowing an authenticated user with specific permissions to update resources they do not own by providing a target resource ID in a request. This can lead to unauthorized modification of resource configurations, such as names, URIs, and scopes. | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||
| CVE-2026-63909 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl(). | ||||