Export limit exceeded: 381796 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381796 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74673 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: evdev - fix information leak in evdev_pass_values() In evdev_pass_values(), the input_event structure is allocated on the kernel stack and populated field-by-field. However, it is never fully initialized. On architectures where struct input_event contains explicit or implicit padding (such as the 32-bit __pad field on SPARC64), these padding bytes are left uninitialized. When this event structure is subsequently passed to the client buffer and later copied to userspace, the uninitialized padding bytes leak kernel stack memory, potentially exposing sensitive information. Similar issues exist in __evdev_queue_syn_dropped and __pass_event. Fix this by explicitly zeroing the entire event structure with memset() before populating its fields. This ensures all padding bytes are cleared before the data crosses the security boundary. | ||||
| CVE-2026-74672 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series has to deal with carefully. This mitigation resolves the issue by acquiring the mmap read lock on init_mm on vmap page table free if a ptdump is in progress. However the fix in this series would cause a deadlock if we were to simply apply it for arm64 without also reverting the change. This is because vmap may acquire the read lock before ptdump attempts to acquire the write lock, which then gets queued, and rwsem starvation rules mean that the (unacknowledged) nested mmap read lock in the arm64 code would also block, meaning the original read lock is never released and thus deadlock. This series works around this by #ifndef CONFIG_ARM64'ing the mmap read lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap support, and removing the ifdeffery with the partial revert patch. There are related issues that are also addressed in this series: * x86 page attribute logic, specifically Change Page Attributes (CPA), implements a feature whereby huge ranges can be collapsed into huge leaf entries. This can similarly cause a UAF when done in parallel with a ptdump walk, so similarly acquire the init_mm mmap lock to avoid this. * The CPA logic allows concurrent page table manipulation and CPA collapse, meaning the former risks accessing a page table the latter frees. Fix this by acquiring mmap write lock on init_mm across the whole CPA collapse operation and read lock on the page table manipulation. * x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm walks, and in x86's case arbitrary mm's), so we ensure kernel mappings remain stable by locking the init_mm as well as the mm being walked. The ordering of patches is established for both strict dependencies (the arm64 partial revert in particular has to be done after the vmap changes) and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA fixes are in place). This patch (of 3): Currently there is a nasty ra ---truncated--- | ||||
| CVE-2026-74671 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ima: fix out-of-bounds read in xattr_verify() The digest-length check in xattr_verify() mixes int and size_t: if (xattr_len - sizeof(xattr_value->type) - hash_start >= iint->ima_hash->length) sizeof() yields size_t, so the usual arithmetic conversions promote the whole left-hand side to unsigned 64-bit before the subtraction runs. For a truncated xattr this underflows instead of going negative: a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1) turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length. The check then passes and the following memcmp() reads iint->ima_hash->length bytes starting past the end of the buffer vfs_getxattr_alloc() allocated for it. Nothing upstream clamps xattr_len back into a safe range first: ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than failing when no HMAC key is loaded, so a truncated security.ima value reaches the length check as-is. Rewrite the comparison so every operand stays a signed int and no implicit conversion to size_t can occur. | ||||
| CVE-2026-74670 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference. | ||||
| CVE-2026-74669 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: clear IPv4 options after rebasing tunnel ICMP errors ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the quoted original request before passing it to icmp_send(). However, IPCB(skb)->opt still describes the outer IPv4 header. A timestamp option in the outer header can therefore leave an offset that points into the quoted transport header after the rebase. __ip_options_echo() treats a byte at that stale location as the option length and copies it into the fixed-size option storage on the __icmp_send() stack, causing a stack out-of-bounds write. Clear the stale option metadata after resetting the network header. Keep the remaining control block fields, including the ingress interface used by the ICMP response path. | ||||
| CVE-2026-74668 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in TX_RING send path tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative. Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb(). The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here. | ||||
| CVE-2026-74667 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested. | ||||
| CVE-2026-74666 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: packet: synchronize pressure clearing with ring reconfiguration packet_set_ring() updates the RX ring state under sk_receive_queue.lock, but used to publish the tpacket receive mode through po->prot_hook.func after releasing that lock. packet_poll() and packet_recvmsg() can then run the pressure clearing path after the ring has been cleared while still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference stale or NULL ring storage. Move the existing receive hook assignment into the same sk_receive_queue.lock section as the ring state update. Keep the assignment otherwise unchanged, including on TX ring reconfiguration, to avoid adding behavior changes that are not required for the fix. Serialize packet_recvmsg() pressure clearing with the same queue lock only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear and the socket has moved away from tpacket_rcv, packet_set_ring() has already detached the socket and waited for synchronize_net(), so no new packet input can set the flag again. packet_poll() already holds sk_receive_queue.lock, so it uses the new unlocked helper directly. | ||||
| CVE-2026-74665 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. | ||||
| CVE-2026-74664 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reallocate update replies for mismatched IDs ovs_flow_cmd_new() preallocates the optional reply skb before it takes ovs_mutex and before it knows which existing flow will be updated. That is normally fine because the skb is sized from the request flow identifier. That identifier also becomes the inserted flow's identifier. For updates, however, a request with a UFID may miss the UFID lookup and then fall back to the flow key lookup. That lookup can legitimately find an existing key-identified flow. UFIDs are optional and the flow key is the primary identifier. For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's identifier, not the request identifier used for the preallocation. A short request UFID can therefore leave too little room for the key identifier. The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the update path. Once the update target has been resolved, reallocate the reply skb if the matched flow needs a larger reply than the request identifier allowed. Do this before replacing the actions so the request can still fail cleanly if the rare extra allocation fails. | ||||
| CVE-2026-74663 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: reject overly deep qdisc hierarchies Deep qdisc hierarchies can lead to excessive recursion in qdisc tree walkers and exhaust the kernel stack. The existing loop check does not cover the create-and-graft path, so a hierarchy can still be extended by creating a new child qdisc below an already deep parent. Store the hierarchy depth in struct Qdisc and update it when qdiscs are grafted. Reject new child qdiscs once the parent is already at the maximum allowed depth. | ||||
| CVE-2026-74662 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: publish queues before arming timer inet_frag_create() arms the fragment queue timer before inserting the queue into the fqdir rhashtable. If the namespace fragment timeout is zero or negative, the timer can run before the queue is published. The timer callback then marks the queue complete, tries to remove a node that is not in the hash table yet, and drops the anticipated hash reference. Creation can subsequently publish the completed queue without restoring that reference, leaving a stale hash node after the caller drops the remaining reference. Publish the queue first and arm the timer while holding the queue lock. This makes timer expiry wait until the queue is visible in the hash table, so inet_frag_kill() can remove the node and balance the hash reference. | ||||
| CVE-2026-74661 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired. | ||||
| CVE-2026-74660 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger. | ||||
| CVE-2026-74659 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. | ||||
| CVE-2026-74658 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Prevent robust futex exit race some more A robust futex unlock stores 0 over the whole futex value - wiping FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot notification: the protocol relies on its recipient to either acquire the futex (and eventually unlock while aware of the remaining contention) or re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed before it can do either, the kernel must jump in and wake the next task down the line. This is a known complication of the futex protocol with a previous partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit race"). Unfortunately, that fix is insufficient. If a third task re-acquired the futex through the uncontended fast path in the meantime, the notification is lost: robust exit processing sees that it is owned by another task and does nothing, while the new owner sees no FUTEX_WAITERS when it unlocks and wakes nobody. The remaining waiters sleep forever behind a free futex: A owns the futex, B and C sleep in FUTEX_WAIT uval == A | FUTEX_WAITERS A robust unlock: store 0, FUTEX_WAKE(1) wakes B uval == 0 D fast path acquire: cmpxchg(0 -> D) uval == D, no FUTEX_WAITERS B killed before acting on the wakeup B exit walk, pending op: owner D != B -> no action D unlock: no FUTEX_WAITERS -> no wake C sleeps forever This is clearly a shortcoming in the implementation, which fails to keep the FUTEX_WAITERS bit consistent. Work around this by augmenting the robust list exit processing to also perform the extra wakeup if the futex word is owned by another thread but FUTEX_WAITERS is not set. This does not fix the problem of a non-contended take over/release and free sequence, which has been discussed for years and has been addressed by commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and subsequent changes, but failed to take the problem described above into account. A more complete solution which is based on the in kernel unlock of contended robust futexes has been discussed in the context of this change and should show up in mainline sooner than later. [ tglx: Amend change log slightly and fixup coding style ] | ||||
| CVE-2026-74657 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present. | ||||
| CVE-2026-74656 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop. | ||||
| CVE-2026-74655 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. | ||||
| CVE-2026-74654 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_running state therefore makes the flush path pass a NULL channel to dmaengine_pause(), causing a kernel Oops. Clear rx_running after terminating RX DMA, matching the TX cleanup. Also make the flush helper return if the DMA object or RX channel is not available so startup and teardown paths cannot pass a NULL channel to the DMAengine API. | ||||